[Thu Jun 14 22:18:24 2012] Detection parameters:
  Position = (264.3, 391.1) = 12 31 0.86 16 8 34.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2290.0 +/- 57.1
  Background counts = 63.3
  Rate = 0.3 +/- 0.008

[Thu Jun 14 22:18:24 2012] Off-axis axis estimate = 7.16'
[Thu Jun 14 22:19:50 2012] Using EEF radius (= 10.01 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 22:19:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 14 22:19:50 2012] Initial guess for spatial extent in simple fitting = 10.01"
[Thu Jun 14 22:19:50 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.956
[Thu Jun 14 22:19:50 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.01"
[Thu Jun 14 22:30:34 2012] fullrun_pn_xmm0106061101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun 14 22:30:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106061101_pi300-10000_cl_pass0_src1.csv
[Thu Jun 14 22:30:34 2012] fullrun_pn_xmm0106061101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun 14 22:30:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106061101_pi300-10000_cl_pass0_src1.csv
[Thu Jun 14 22:30:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0106061101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0106061101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 22:30:34 2012] fullrun_pn_xmm0106061101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun 14 22:30:34 2012] fullrun_pn_xmm0106061101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun 14 22:30:34 2012] Fit fullrun_pn_xmm0106061101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jun 14 22:53:37 2012] Spatial fit model total counts = 1677.560000, observed total counts = 1600.000000
[Thu Jun 14 22:53:37 2012] Offset between fit and detection position for source 1 = 0.138360 pixels
[Thu Jun 14 22:53:37 2012] 1683.981000 total counts/ 515.941000 bgd. counts: snr = 51.423034
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.138360 pixels
  Position = (264.2, 391.1) = 12 31 0.91 16 8 33.0
  Extent = 5.7 (5.5-6.0)", rotation angle = 0
  Source counts = 1168.0 +/- 41.0
  Background counts = 515.9
  Rate = 0.2 +/- 0.006
[Thu Jun 14 22:53:37 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 22:53:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 22:53:37 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 22:53:37 2012] Source does appear to be extended
[Thu Jun 14 22:53:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 22:53:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 14 22:53:44 2012] Initial guess for spatial extent in simple fitting = 5.75"
[Thu Jun 14 22:53:44 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.205
[Thu Jun 14 22:53:44 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.75"
[Thu Jun 14 23:04:31 2012] fullrun_pn_xmm0106061101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun 14 23:04:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106061101_pi300-10000_cl_pass1_src1.csv
[Thu Jun 14 23:04:31 2012] fullrun_pn_xmm0106061101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun 14 23:04:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106061101_pi300-10000_cl_pass1_src1.csv
[Thu Jun 14 23:04:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0106061101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0106061101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 23:04:31 2012] fullrun_pn_xmm0106061101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun 14 23:04:31 2012] fullrun_pn_xmm0106061101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun 14 23:04:31 2012] Fit fullrun_pn_xmm0106061101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jun 14 23:32:26 2012] Spatial fit model total counts = 1573.550000, observed total counts = 1511.000000
[Thu Jun 14 23:32:26 2012] Offset between fit and detection position for source 1 = 0.004526 pixels
[Thu Jun 14 23:32:26 2012] 1579.042000 total counts/ 433.242000 bgd. counts: snr = 55.048253
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.004526 pixels
  Position = (264.2, 391.1) = 12 31 0.91 16 8 33.1
  Extent = 5.6 (5.3-5.9)", rotation angle = 0
  Source counts = 1145.8 +/- 39.7
  Background counts = 433.2
  Rate = 0.2 +/- 0.005
[Thu Jun 14 23:32:26 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 23:32:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 23:32:26 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 23:32:26 2012] Source does appear to be extended
[Thu Jun 14 23:32:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 23:32:35 2012] Counts = 1145.800000, rescaling region sizes by 2.000000
[Thu Jun 14 23:32:35 2012] XMMSAS src. selection expression = ellipse(22936.894900, 33978.955400, 676.126819, 676.126819, 0.000000, X, Y)
[Thu Jun 14 23:32:35 2012] Writing source region out to fullrun_pn_xmm0106061101_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun 14 23:32:35 2012] Extracting stamp from image fullrun_pn_xmm0106061101_pi300-10000_cl_sm2.00.img.gz, (225, 352) - (303, 430)
[Thu Jun 14 23:32:35 2012] XMMSAS bgd. selection expression = annulus(22936.894900, 33978.955400, 2253.756065, 4507.512130, X, Y) && !ellipse(20192.827393, 39264.471008, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 14 23:32:35 2012] Writing fullrun_pn_xmm0106061101_pi300-10000_pass1_cl_src1.gif
[Thu Jun 14 23:32:38 2012] Mean detx,y = (110.54, -7031.92) 
[Thu Jun 14 23:32:40 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 23:33:20 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 23:33:21 2012] Setting source spectrum file to fullrun_pn_xmm0106061101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 14 23:33:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0106061101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun 14 23:53:10 2012] Updating aperture counts using extracted products
[Thu Jun 14 23:53:10 2012] Error reading totcts from fullrun_pn_xmm0106061101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 14 23:53:10 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 23:53:10 2012] Using photon index=1.80, rate=0.155, arf fullrun_pn_xmm0106061101_pi300-10000_pass1_cl_src1.arf
[Thu Jun 14 23:53:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 23:53:10 2012] Updating source flux to 5.7e-13
[Thu Jun 14 23:53:29 2012] Reading fit data from xmm0106061101/analysis//spectral/fullrun_pn_xmm0106061101_pi300-10000_pass1_cl_src1_pl.csv
[Thu Jun 14 23:53:29 2012] Spectral fit parameter nH value = 6.11201e+19
[Thu Jun 14 23:53:29 2012] Spectral fit parameter PhoIndex value = 1.93478
[Thu Jun 14 23:53:29 2012] Failed to get F(0.3-8.0) from xmm0106061101/analysis//spectral/fullrun_pn_xmm0106061101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jun 14 23:53:29 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 23:53:29 2012] Using Nh = 6.1e+19, photon index=1.93, rate=0.155, arf fullrun_pn_xmm0106061101_pi300-10000_pass1_cl_src1.arf
[Thu Jun 14 23:53:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 23:53:29 2012] Updating source flux to 5.3e-13