[Thu Jun 14 22:18:37 2012] Detection parameters:
  Position = (279.1, 165.2) = 12 30 56.40 15 52 10.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.2 +/- 15.0
  Background counts = 16.3
  Rate = 0.008 +/- 0.0009

[Thu Jun 14 22:18:37 2012] Off-axis axis estimate = 9.76'
[Thu Jun 14 22:30:34 2012] Using EEF radius (= 11.31 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 22:30:34 2012] Initial guess for spatial extent in simple fitting = 11.31"
[Thu Jun 14 22:30:34 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.937
[Thu Jun 14 22:30:34 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.31"
[Thu Jun 14 22:42:46 2012] fullrun_mos1_xmm0106061101_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jun 14 22:42:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106061101_pi300-10000_cl_pass0_src3.csv
[Thu Jun 14 22:42:46 2012] fullrun_mos1_xmm0106061101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jun 14 22:42:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106061101_pi300-10000_cl_pass0_src3.csv
[Thu Jun 14 22:42:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0106061101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0106061101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 22:42:46 2012] fullrun_mos1_xmm0106061101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jun 14 22:42:46 2012] fullrun_mos1_xmm0106061101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jun 14 22:42:46 2012] Fit fullrun_mos1_xmm0106061101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Jun 14 22:53:38 2012] Spatial fit model total counts = 146.000000, observed total counts = 146.000000
[Thu Jun 14 22:53:38 2012] Offset between fit and detection position for source 10 = 0.116577 pixels
[Thu Jun 14 22:53:38 2012] 146.508500 total counts/ 70.082900 bgd. counts: snr = 9.129202
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.116577 pixels
  Position = (279.0, 165.3) = 12 30 56.42 15 52 10.7
  Extent = 5.8 (4.8-6.8)", rotation angle = 0
  Source counts = 76.4 +/- 12.1
  Background counts = 70.1
  Rate = 0.006 +/- 0.0009
[Thu Jun 14 22:53:38 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 22:53:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 22:53:38 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 22:53:38 2012] Source does appear to be extended
[Thu Jun 14 22:53:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 23:04:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 14 23:04:31 2012] Initial guess for spatial extent in simple fitting = 5.85"
[Thu Jun 14 23:04:31 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.176
[Thu Jun 14 23:04:31 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.85"
[Thu Jun 14 23:18:02 2012] fullrun_mos1_xmm0106061101_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jun 14 23:18:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106061101_pi300-10000_cl_pass1_src3.csv
[Thu Jun 14 23:18:02 2012] fullrun_mos1_xmm0106061101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jun 14 23:18:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106061101_pi300-10000_cl_pass1_src3.csv
[Thu Jun 14 23:18:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0106061101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0106061101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 23:18:02 2012] fullrun_mos1_xmm0106061101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jun 14 23:18:02 2012] fullrun_mos1_xmm0106061101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jun 14 23:18:02 2012] Fit fullrun_mos1_xmm0106061101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Jun 14 23:32:27 2012] Warning, spatial fit 3 centroid is now closest to src. 6
[Thu Jun 14 23:32:27 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 23:32:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 23:32:27 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 23:32:27 2012] Source does appear to be extended
[Thu Jun 14 23:32:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 23:40:20 2012] XMMSAS src. selection expression = ellipse(24228.752540, 14330.654200, 350.893810, 350.893810, 0.000000, X, Y)
[Thu Jun 14 23:40:20 2012] Writing source region out to fullrun_mos1_xmm0106061101_pi300-10000_pass1_cl_src10_src.reg
[Thu Jun 14 23:40:20 2012] Extracting stamp from image fullrun_mos1_xmm0106061101_pi300-10000_cl_sm2.00.img.gz, (259, 145) - (299, 185)
[Thu Jun 14 23:40:20 2012] XMMSAS bgd. selection expression = annulus(24228.752540, 14330.654200, 584.823017, 1169.646034, X, Y)
[Thu Jun 14 23:40:20 2012] Writing fullrun_mos1_xmm0106061101_pi300-10000_pass1_cl_src10.gif
[Thu Jun 14 23:40:45 2012] Mean detx,y = (-10831.90, -8294.75) 
[Thu Jun 14 23:40:45 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 23:40:50 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 23:40:50 2012] Setting source spectrum file to fullrun_mos1_xmm0106061101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Jun 14 23:40:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0106061101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu Jun 14 23:45:10 2012] Not generating rmf since there are only 76 counts
[Thu Jun 14 23:45:10 2012] rmf not generated due to insufficient counts
[Thu Jun 14 23:53:11 2012] Updating aperture counts using extracted products
[Thu Jun 14 23:53:11 2012] Error reading totcts from fullrun_mos1_xmm0106061101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Jun 14 23:53:11 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 23:53:11 2012] Using photon index=1.80, rate=0.00554, arf fullrun_mos1_xmm0106061101_pi300-10000_pass1_cl_src10.arf
[Thu Jun 14 23:53:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 23:53:11 2012] Updating source flux to 1.6e-13
[Thu Jun 14 23:53:12 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting