[Mon Jul  2 10:22:54 2012] Detection parameters:
  Position = (348.8, 207.1) = 12 30 35.43 15 35 8.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 158.5 +/- 15.8
  Background counts = 6.1
  Rate = 0.02 +/- 0.002

[Mon Jul  2 10:22:54 2012] Off-axis axis estimate = 7.57'
[Mon Jul  2 10:56:20 2012] Using EEF radius (= 10.21 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 10:56:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul  2 10:56:20 2012] Initial guess for spatial extent in simple fitting = 10.21"
[Mon Jul  2 10:56:20 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.110
[Mon Jul  2 10:56:20 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.21"
[Mon Jul  2 11:08:58 2012] fullrun_mos2_xmm0106061001_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jul  2 11:08:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106061001_pi300-10000_cl_pass0_src1.csv
[Mon Jul  2 11:08:58 2012] fullrun_mos2_xmm0106061001_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jul  2 11:08:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106061001_pi300-10000_cl_pass0_src1.csv
[Mon Jul  2 11:08:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0106061001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0106061001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 11:08:58 2012] fullrun_mos2_xmm0106061001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jul  2 11:08:58 2012] fullrun_mos2_xmm0106061001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jul  2 11:08:58 2012] Fit fullrun_mos2_xmm0106061001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jul  2 11:09:05 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 12.651313 pixels away
[Mon Jul  2 11:09:05 2012] Vigneting correction estimate = 1.000000
[Mon Jul  2 11:09:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  2 11:09:05 2012] Assessing source extent using major
[Mon Jul  2 11:09:05 2012] Source does appear to be extended
[Mon Jul  2 11:09:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  2 11:40:29 2012] Using EEF radius (= 10.21 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 11:40:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul  2 11:40:29 2012] Initial guess for spatial extent in simple fitting = 10.21"
[Mon Jul  2 11:40:29 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.110
[Mon Jul  2 11:40:29 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.21"
[Mon Jul  2 11:52:54 2012] fullrun_mos2_xmm0106061001_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jul  2 11:52:54 2012] fullrun_mos2_xmm0106061001_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jul  2 11:52:54 2012] Fit fullrun_mos2_xmm0106061001_pi300-10000_cl_pass1_src1 appears to have run properly
[Mon Jul  2 11:52:54 2012] fullrun_mos2_xmm0106061001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jul  2 11:52:54 2012] fullrun_mos2_xmm0106061001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jul  2 11:52:54 2012] Fit fullrun_mos2_xmm0106061001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jul  2 11:53:00 2012] Spatial fit model total counts = 195.022000, observed total counts = 187.000000
[Mon Jul  2 11:53:00 2012] Offset between fit and detection position for source 1 = 0.027114 pixels
[Mon Jul  2 11:53:00 2012] 194.309300 total counts/ 86.052300 bgd. counts: snr = 11.670105
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.027114 pixels
  Position = (348.9, 207.1) = 12 30 35.42 15 35 8.4
  Extent = 6.2" x 4.7", rotation angle = 332
  Source counts = 108.3 +/- 13.9
  Background counts = 86.1
  Rate = 0.01 +/- 0.001
[Mon Jul  2 11:53:00 2012] Vigneting correction estimate = 1.000000
[Mon Jul  2 11:53:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  2 11:53:00 2012] Assessing source extent using major
[Mon Jul  2 11:53:00 2012] Source does appear to be extended
[Mon Jul  2 11:53:00 2012] Computing asymmetry using major and minor axis, asym = 1.33
[Mon Jul  2 12:11:17 2012] XMMSAS src. selection expression = ellipse(30302.413531, 17966.252465, 373.642590, 281.243982, 331.678945, X, Y)
[Mon Jul  2 12:11:17 2012] Writing source region out to fullrun_mos2_xmm0106061001_pi300-10000_pass1_cl_src1_src.reg
[Mon Jul  2 12:11:17 2012] Extracting stamp from image fullrun_mos2_xmm0106061001_pi300-10000_cl_sm2.00.img.gz, (327, 186) - (370, 229)
[Mon Jul  2 12:11:17 2012] XMMSAS bgd. selection expression = annulus(30302.413531, 17966.252465, 622.737651, 1245.475301, X, Y)
[Mon Jul  2 12:11:17 2012] Writing fullrun_mos2_xmm0106061001_pi300-10000_pass1_cl_src1.gif
[Mon Jul  2 12:11:18 2012] Mean detx,y = (1190.77, -10701.35) 
[Mon Jul  2 12:11:19 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  2 12:11:24 2012] Binned source spectrum to 10 counts/bin
[Mon Jul  2 12:11:25 2012] Setting source spectrum file to fullrun_mos2_xmm0106061001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul  2 12:11:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0106061001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jul  2 12:20:25 2012] Updating aperture counts using extracted products
[Mon Jul  2 12:20:25 2012] Error reading totcts from fullrun_mos2_xmm0106061001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul  2 12:20:26 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  2 12:20:26 2012] Using photon index=1.80, rate=0.0111, arf fullrun_mos2_xmm0106061001_pi300-10000_pass1_cl_src1.arf
[Mon Jul  2 12:20:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  2 12:20:26 2012] Updating source flux to 2.4e-13
[Mon Jul  2 12:20:42 2012] Reading fit data from xmm0106061001/analysis//spectral/fullrun_mos2_xmm0106061001_pi300-10000_pass1_cl_src1_pl.csv
[Mon Jul  2 12:20:42 2012] Spectral fit parameter nH value = 1.89113e+20
[Mon Jul  2 12:20:42 2012] Spectral fit parameter PhoIndex value = 2.40905
[Mon Jul  2 12:20:42 2012] Failed to get F(0.3-8.0) from xmm0106061001/analysis//spectral/fullrun_mos2_xmm0106061001_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Jul  2 12:20:42 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  2 12:20:42 2012] Using Nh = 1.9e+20, photon index=2.41, rate=0.0111, arf fullrun_mos2_xmm0106061001_pi300-10000_pass1_cl_src1.arf
[Mon Jul  2 12:20:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  2 12:20:42 2012] Updating source flux to 1.9e-13