[Fri Jun  1 17:22:12 2012] Detection parameters:
  Position = (221.3, 295.9) = 12 31 13.95 15 21 33.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 233.4 +/- 18.6
  Background counts = 24.0
  Rate = 0.04 +/- 0.003

[Fri Jun  1 17:22:13 2012] Off-axis axis estimate = 5.60'
[Fri Jun  1 17:23:30 2012] Using EEF radius (= 9.23 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 17:23:30 2012] Initial guess for spatial extent in simple fitting = 9.23"
[Fri Jun  1 17:23:30 2012] source mask rpix=2.1, npix_max = 27, mask sum = 26, frac = 0.946
[Fri Jun  1 17:23:30 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.23"
[Fri Jun  1 17:51:35 2012] fullrun_pn_xmm0106060901_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jun  1 17:51:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106060901_pi300-10000_cl_pass0_src3.csv
[Fri Jun  1 17:51:35 2012] fullrun_pn_xmm0106060901_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jun  1 17:51:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106060901_pi300-10000_cl_pass0_src3.csv
[Fri Jun  1 17:51:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0106060901_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0106060901_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 17:51:35 2012] fullrun_pn_xmm0106060901_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun  1 17:51:35 2012] fullrun_pn_xmm0106060901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun  1 17:51:35 2012] Fit fullrun_pn_xmm0106060901_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jun  1 18:22:21 2012] Spatial fit model total counts = 260.808000, observed total counts = 243.000000
[Fri Jun  1 18:22:21 2012] Offset between fit and detection position for source 4 = 0.253819 pixels
[Fri Jun  1 18:22:21 2012] 265.495000 total counts/ 115.307000 bgd. counts: snr = 13.986447
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.253819 pixels
  Position = (221.1, 295.7) = 12 31 13.99 15 21 34.4
  Extent = 5.5 (4.8-6.6)", rotation angle = 0
  Source counts = 150.2 +/- 16.3
  Background counts = 115.3
  Rate = 0.02 +/- 0.002
[Fri Jun  1 18:22:21 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 18:22:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 18:22:21 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 18:22:21 2012] Source does appear to be extended
[Fri Jun  1 18:22:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 18:22:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  1 18:22:32 2012] Initial guess for spatial extent in simple fitting = 5.52"
[Fri Jun  1 18:22:32 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.959
[Fri Jun  1 18:22:32 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.52"
[Fri Jun  1 18:48:40 2012] fullrun_pn_xmm0106060901_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun  1 18:48:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106060901_pi300-10000_cl_pass1_src3.csv
[Fri Jun  1 18:48:40 2012] fullrun_pn_xmm0106060901_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun  1 18:48:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106060901_pi300-10000_cl_pass1_src3.csv
[Fri Jun  1 18:48:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0106060901_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0106060901_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 18:48:40 2012] fullrun_pn_xmm0106060901_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun  1 18:48:40 2012] fullrun_pn_xmm0106060901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun  1 18:48:40 2012] Fit fullrun_pn_xmm0106060901_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jun  1 19:17:42 2012] Spatial fit model total counts = 244.826000, observed total counts = 240.000000
[Fri Jun  1 19:17:42 2012] Offset between fit and detection position for source 4 = 0.032278 pixels
[Fri Jun  1 19:17:42 2012] 251.523100 total counts/ 97.990100 bgd. counts: snr = 15.509958
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.032278 pixels
  Position = (221.1, 295.7) = 12 31 13.99 15 21 34.3
  Extent = 5.7 (4.9-6.7)", rotation angle = 0
  Source counts = 153.5 +/- 15.9
  Background counts = 98.0
  Rate = 0.02 +/- 0.002
[Fri Jun  1 19:17:42 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 19:17:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 19:17:42 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 19:17:42 2012] Source does appear to be extended
[Fri Jun  1 19:17:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 19:17:52 2012] XMMSAS src. selection expression = ellipse(19188.378740, 25674.933000, 340.822210, 340.822210, 0.000000, X, Y)
[Fri Jun  1 19:17:52 2012] Writing source region out to fullrun_pn_xmm0106060901_pi300-10000_pass1_cl_src4_src.reg
[Fri Jun  1 19:17:52 2012] Extracting stamp from image fullrun_pn_xmm0106060901_pi300-10000_cl_sm2.00.img.gz, (202, 276) - (241, 315)
[Fri Jun  1 19:17:52 2012] XMMSAS bgd. selection expression = annulus(19188.378740, 25674.933000, 568.037016, 1136.074033, X, Y) && !ellipse(20562.233566, 24092.853027, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  1 19:17:52 2012] Writing fullrun_pn_xmm0106060901_pi300-10000_pass1_cl_src4.gif
[Fri Jun  1 19:19:52 2012] Mean detx,y = (-7103.31, -1466.74) 
[Fri Jun  1 19:19:55 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 19:20:13 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 19:20:13 2012] Setting source spectrum file to fullrun_pn_xmm0106060901_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jun  1 19:20:13 2012] Setting bgd. spectrum file to fullrun_pn_xmm0106060901_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jun  1 19:50:36 2012] Updating aperture counts using extracted products
[Fri Jun  1 19:50:36 2012] Error reading totcts from fullrun_pn_xmm0106060901_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jun  1 19:50:36 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 19:50:36 2012] Using photon index=1.80, rate=0.0173, arf fullrun_pn_xmm0106060901_pi300-10000_pass1_cl_src4.arf
[Fri Jun  1 19:50:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 19:50:36 2012] Updating source flux to 8.6e-14
[Fri Jun  1 19:50:59 2012] Reading fit data from xmm0106060901/analysis//spectral/fullrun_pn_xmm0106060901_pi300-10000_pass1_cl_src4_pl.csv
[Fri Jun  1 19:50:59 2012] Spectral fit parameter nH value = 2.92365e+14
[Fri Jun  1 19:50:59 2012] Spectral fit parameter PhoIndex value = 1.68862
[Fri Jun  1 19:50:59 2012] Failed to get F(0.3-8.0) from xmm0106060901/analysis//spectral/fullrun_pn_xmm0106060901_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Fri Jun  1 19:50:59 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 19:50:59 2012] Using Nh = 2.9e+14, photon index=1.69, rate=0.0173, arf fullrun_pn_xmm0106060901_pi300-10000_pass1_cl_src4.arf
[Fri Jun  1 19:50:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 19:50:59 2012] Updating source flux to 9.3e-14