[Fri Jun  1 17:22:49 2012] Detection parameters:
  Position = (243.9, 225.1) = 12 31 7.12 15 16 28.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.3 +/- 10.1
  Background counts = 10.6
  Rate = 0.006 +/- 0.001

[Fri Jun  1 17:22:49 2012] Off-axis axis estimate = 6.63'
[Fri Jun  1 18:08:23 2012] Using EEF radius (= 9.74 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 18:08:23 2012] Initial guess for spatial extent in simple fitting = 9.74"
[Fri Jun  1 18:08:23 2012] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.199
[Fri Jun  1 18:08:23 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 9.74"
[Fri Jun  1 18:22:17 2012] fullrun_mos2_xmm0106060901_pi300-10000_cl_pass0_src4.ximg exists
[Fri Jun  1 18:22:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106060901_pi300-10000_cl_pass0_src4.csv
[Fri Jun  1 18:22:17 2012] fullrun_mos2_xmm0106060901_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Jun  1 18:22:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106060901_pi300-10000_cl_pass0_src4.csv
[Fri Jun  1 18:22:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0106060901_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0106060901_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 18:22:17 2012] fullrun_mos2_xmm0106060901_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Jun  1 18:22:17 2012] fullrun_mos2_xmm0106060901_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Jun  1 18:22:17 2012] Fit fullrun_mos2_xmm0106060901_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Jun  1 18:22:25 2012] Spatial fit model total counts = 92.508000, observed total counts = 93.000000
[Fri Jun  1 18:22:25 2012] Offset between fit and detection position for source 8 = 0.131424 pixels
[Fri Jun  1 18:22:25 2012] 93.699000 total counts/ 57.896300 bgd. counts: snr = 4.705333
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.131424 pixels
  Position = (244.0, 225.2) = 12 31 7.10 15 16 27.6
  Extent = 5.7 (3.8-7.9)", rotation angle = 0
  Source counts = 35.8 +/- 9.7
  Background counts = 57.9
  Rate = 0.003 +/- 0.0007
[Fri Jun  1 18:22:25 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 18:22:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 18:22:25 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 18:22:25 2012] Source does appear to be extended
[Fri Jun  1 18:22:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 19:03:21 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  1 19:03:21 2012] Initial guess for spatial extent in simple fitting = 5.67"
[Fri Jun  1 19:03:21 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.228
[Fri Jun  1 19:03:21 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 5.67"
[Fri Jun  1 19:17:38 2012] fullrun_mos2_xmm0106060901_pi300-10000_cl_pass1_src4.ximg exists
[Fri Jun  1 19:17:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106060901_pi300-10000_cl_pass1_src4.csv
[Fri Jun  1 19:17:38 2012] fullrun_mos2_xmm0106060901_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Jun  1 19:17:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106060901_pi300-10000_cl_pass1_src4.csv
[Fri Jun  1 19:17:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0106060901_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0106060901_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 19:17:38 2012] fullrun_mos2_xmm0106060901_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Jun  1 19:17:38 2012] fullrun_mos2_xmm0106060901_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Jun  1 19:17:38 2012] Fit fullrun_mos2_xmm0106060901_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Jun  1 19:17:46 2012] Spatial fit model total counts = 92.636600, observed total counts = 93.000000
[Fri Jun  1 19:17:46 2012] Offset between fit and detection position for source 8 = 0.004394 pixels
[Fri Jun  1 19:17:46 2012] 93.828200 total counts/ 58.053800 bgd. counts: snr = 4.695232
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.004394 pixels
  Position = (244.0, 225.2) = 12 31 7.09 15 16 27.7
  Extent = 5.6 (3.8-7.9)", rotation angle = 0
  Source counts = 35.8 +/- 9.7
  Background counts = 58.1
  Rate = 0.003 +/- 0.0007
[Fri Jun  1 19:17:46 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 19:17:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 19:17:46 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 19:17:46 2012] Source does appear to be extended
[Fri Jun  1 19:17:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 19:43:50 2012] XMMSAS src. selection expression = ellipse(21182.577520, 19541.295600, 338.469610, 338.469610, 0.000000, X, Y)
[Fri Jun  1 19:43:50 2012] Writing source region out to fullrun_mos2_xmm0106060901_pi300-10000_pass1_cl_src8_src.reg
[Fri Jun  1 19:43:50 2012] Extracting stamp from image fullrun_mos2_xmm0106060901_pi300-10000_cl_sm2.00.img.gz, (225, 206) - (263, 245)
[Fri Jun  1 19:43:50 2012] XMMSAS bgd. selection expression = annulus(21182.577520, 19541.295600, 564.116016, 1128.232032, X, Y)
[Fri Jun  1 19:43:50 2012] Writing fullrun_mos2_xmm0106060901_pi300-10000_pass1_cl_src8.gif
[Fri Jun  1 19:44:34 2012] Mean detx,y = (8344.93, -5103.46) 
[Fri Jun  1 19:44:34 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 19:44:41 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 19:44:42 2012] Setting source spectrum file to fullrun_mos2_xmm0106060901_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Jun  1 19:44:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0106060901_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Fri Jun  1 19:49:45 2012] Not generating rmf since there are only 35 counts
[Fri Jun  1 19:49:45 2012] rmf not generated due to insufficient counts
[Fri Jun  1 19:50:36 2012] Updating aperture counts using extracted products
[Fri Jun  1 19:50:36 2012] Error reading totcts from fullrun_mos2_xmm0106060901_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Jun  1 19:50:36 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 19:50:36 2012] Using photon index=1.80, rate=0.00264, arf fullrun_mos2_xmm0106060901_pi300-10000_pass1_cl_src8.arf
[Fri Jun  1 19:50:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 19:50:36 2012] Updating source flux to 5.7e-14
[Fri Jun  1 19:50:44 2012] Source 8 has fewer than 100.000000 counts, skipping spectral fitting