[Fri Jun  1 17:22:49 2012] Detection parameters:
  Position = (349.1, 483.2) = 12 30 35.48 15 35 11.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 229.0 +/- 19.3
  Background counts = 10.3
  Rate = 0.02 +/- 0.001

[Fri Jun  1 17:22:49 2012] Off-axis axis estimate = 13.89'
[Fri Jun  1 18:08:23 2012] Using EEF radius (= 13.37 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 18:08:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  1 18:08:23 2012] Initial guess for spatial extent in simple fitting = 13.37"
[Fri Jun  1 18:08:23 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.959
[Fri Jun  1 18:08:23 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 13.37"
[Fri Jun  1 18:22:17 2012] fullrun_mos2_xmm0106060901_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jun  1 18:22:17 2012] fullrun_mos2_xmm0106060901_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jun  1 18:22:17 2012] Fit fullrun_mos2_xmm0106060901_pi300-10000_cl_pass0_src2 appears to have run properly
[Fri Jun  1 18:22:17 2012] fullrun_mos2_xmm0106060901_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jun  1 18:22:17 2012] fullrun_mos2_xmm0106060901_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jun  1 18:22:17 2012] Fit fullrun_mos2_xmm0106060901_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Jun  1 18:22:25 2012] Spatial fit model total counts = 241.370000, observed total counts = 237.000000
[Fri Jun  1 18:22:25 2012] Offset between fit and detection position for source 2 = 0.259481 pixels
[Fri Jun  1 18:22:25 2012] 238.869900 total counts/ 96.232900 bgd. counts: snr = 14.540201
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.259481 pixels
  Position = (348.9, 483.2) = 12 30 35.56 15 35 9.9
  Extent = 10.0" x 3.4", rotation angle = 3
  Source counts = 142.6 +/- 15.5
  Background counts = 96.2
  Rate = 0.01 +/- 0.001
[Fri Jun  1 18:22:25 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 18:22:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 18:22:25 2012] Assessing source extent using major
[Fri Jun  1 18:22:25 2012] Source does appear to be extended
[Fri Jun  1 18:22:25 2012] Computing asymmetry using major and minor axis, asym = 2.95
[Fri Jun  1 18:22:25 2012] Source is asymmetric
[Fri Jun  1 19:03:21 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  1 19:03:21 2012] Initial guess for spatial extent in simple fitting = 6.67"
[Fri Jun  1 19:03:21 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.969
[Fri Jun  1 19:03:21 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 6.67"
[Fri Jun  1 19:17:38 2012] fullrun_mos2_xmm0106060901_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jun  1 19:17:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106060901_pi300-10000_cl_pass1_src2.csv
[Fri Jun  1 19:17:38 2012] fullrun_mos2_xmm0106060901_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jun  1 19:17:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106060901_pi300-10000_cl_pass1_src2.csv
[Fri Jun  1 19:17:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0106060901_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0106060901_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 19:17:38 2012] fullrun_mos2_xmm0106060901_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jun  1 19:17:38 2012] fullrun_mos2_xmm0106060901_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jun  1 19:17:38 2012] Fit fullrun_mos2_xmm0106060901_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Jun  1 19:17:46 2012] Spatial fit model total counts = 213.862000, observed total counts = 211.000000
[Fri Jun  1 19:17:46 2012] Offset between fit and detection position for source 2 = 0.101271 pixels
[Fri Jun  1 19:17:46 2012] 209.366600 total counts/ 76.793600 bgd. counts: snr = 15.128385
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.101271 pixels
  Position = (349.0, 483.2) = 12 30 35.53 15 35 10.0
  Extent = 6.3 (5.1-7.4)", rotation angle = 0
  Source counts = 132.6 +/- 14.5
  Background counts = 76.8
  Rate = 0.01 +/- 0.001
[Fri Jun  1 19:17:46 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 19:17:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 19:17:46 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 19:17:46 2012] Source does appear to be extended
[Fri Jun  1 19:17:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 19:43:50 2012] XMMSAS src. selection expression = ellipse(30310.666040, 41989.102000, 380.178011, 380.178011, 0.000000, X, Y)
[Fri Jun  1 19:43:50 2012] Writing source region out to fullrun_mos2_xmm0106060901_pi300-10000_pass1_cl_src2_src.reg
[Fri Jun  1 19:43:50 2012] Extracting stamp from image fullrun_mos2_xmm0106060901_pi300-10000_cl_sm2.00.img.gz, (327, 461) - (371, 505)
[Fri Jun  1 19:43:50 2012] XMMSAS bgd. selection expression = annulus(30310.666040, 41989.102000, 633.630018, 1267.260036, X, Y)
[Fri Jun  1 19:43:50 2012] Writing fullrun_mos2_xmm0106060901_pi300-10000_pass1_cl_src2.gif
[Fri Jun  1 19:44:12 2012] Mean detx,y = (-10133.95, 10584.19) 
[Fri Jun  1 19:44:13 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 19:44:20 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 19:44:20 2012] Setting source spectrum file to fullrun_mos2_xmm0106060901_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun  1 19:44:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0106060901_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jun  1 19:50:36 2012] Updating aperture counts using extracted products
[Fri Jun  1 19:50:36 2012] Error reading totcts from fullrun_mos2_xmm0106060901_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun  1 19:50:36 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 19:50:36 2012] Using photon index=1.80, rate=0.00977, arf fullrun_mos2_xmm0106060901_pi300-10000_pass1_cl_src2.arf
[Fri Jun  1 19:50:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 19:50:36 2012] Updating source flux to 3.2e-13
[Fri Jun  1 19:50:49 2012] Reading fit data from xmm0106060901/analysis//spectral/fullrun_mos2_xmm0106060901_pi300-10000_pass1_cl_src2_pl.csv
[Fri Jun  1 19:50:49 2012] Spectral fit parameter nH value = 6.6056e+20
[Fri Jun  1 19:50:49 2012] Spectral fit parameter PhoIndex value = 2.23783
[Fri Jun  1 19:50:49 2012] Failed to get F(0.3-8.0) from xmm0106060901/analysis//spectral/fullrun_mos2_xmm0106060901_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Jun  1 19:50:49 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 19:50:49 2012] Using Nh = 6.6e+20, photon index=2.24, rate=0.00977, arf fullrun_mos2_xmm0106060901_pi300-10000_pass1_cl_src2.arf
[Fri Jun  1 19:50:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 19:50:49 2012] Updating source flux to 2.8e-13