[Fri Jun  1 17:22:32 2012] Detection parameters:
  Position = (221.3, 295.7) = 12 31 13.93 15 21 34.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.0 +/- 13.9
  Background counts = 13.0
  Rate = 0.01 +/- 0.001

[Fri Jun  1 17:22:32 2012] Off-axis axis estimate = 5.59'
[Fri Jun  1 17:51:36 2012] Using EEF radius (= 9.23 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 17:51:36 2012] Initial guess for spatial extent in simple fitting = 9.23"
[Fri Jun  1 17:51:36 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.910
[Fri Jun  1 17:51:36 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.23"
[Fri Jun  1 18:08:23 2012] fullrun_mos1_xmm0106060901_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jun  1 18:08:23 2012] fullrun_mos1_xmm0106060901_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jun  1 18:08:23 2012] Fit fullrun_mos1_xmm0106060901_pi300-10000_cl_pass0_src3 appears to have run properly
[Fri Jun  1 18:08:23 2012] fullrun_mos1_xmm0106060901_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun  1 18:08:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106060901_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jun  1 18:08:23 2012] fullrun_mos1_xmm0106060901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun  1 18:08:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106060901_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jun  1 18:08:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0106060901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0106060901_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 18:22:24 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 15.065041 pixels away
[Fri Jun  1 18:22:24 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 18:22:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 18:22:24 2012] Assessing source extent using major
[Fri Jun  1 18:22:24 2012] Source does appear to be extended
[Fri Jun  1 18:22:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 18:48:40 2012] Using EEF radius (= 9.23 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 18:48:40 2012] Initial guess for spatial extent in simple fitting = 9.23"
[Fri Jun  1 18:48:40 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.910
[Fri Jun  1 18:48:40 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.23"
[Fri Jun  1 19:03:21 2012] fullrun_mos1_xmm0106060901_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun  1 19:03:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106060901_pi300-10000_cl_pass1_src3.csv
[Fri Jun  1 19:03:21 2012] fullrun_mos1_xmm0106060901_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun  1 19:03:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106060901_pi300-10000_cl_pass1_src3.csv
[Fri Jun  1 19:03:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0106060901_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0106060901_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 19:03:21 2012] fullrun_mos1_xmm0106060901_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun  1 19:03:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106060901_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jun  1 19:03:21 2012] fullrun_mos1_xmm0106060901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun  1 19:03:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106060901_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jun  1 19:03:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0106060901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0106060901_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 19:17:44 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 14.632671 pixels away
[Fri Jun  1 19:17:44 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 19:17:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 19:17:44 2012] Assessing source extent using major
[Fri Jun  1 19:17:44 2012] Source does appear to be extended
[Fri Jun  1 19:17:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 19:36:24 2012] XMMSAS src. selection expression = ellipse(19206.874298, 25679.777313, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun  1 19:36:24 2012] Writing source region out to fullrun_mos1_xmm0106060901_pi300-10000_pass1_cl_src9_src.reg
[Fri Jun  1 19:36:24 2012] Extracting stamp from image fullrun_mos1_xmm0106060901_pi300-10000_cl_sm2.00.img.gz, (184, 258) - (259, 333)
[Fri Jun  1 19:36:24 2012] XMMSAS bgd. selection expression = annulus(19206.874298, 25679.777313, 1087.500000, 2175.000000, X, Y)
[Fri Jun  1 19:36:24 2012] Writing fullrun_mos1_xmm0106060901_pi300-10000_pass1_cl_src9.gif
[Fri Jun  1 19:36:54 2012] Mean detx,y = (1490.69, -7434.81) 
[Fri Jun  1 19:36:55 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 19:37:17 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 19:37:17 2012] Setting source spectrum file to fullrun_mos1_xmm0106060901_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Jun  1 19:37:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0106060901_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Fri Jun  1 19:42:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun  1 19:42:47 2012] rmf not generated due to insufficient counts
[Fri Jun  1 19:50:36 2012] Updating aperture counts using extracted products
[Fri Jun  1 19:50:36 2012] Error reading totcts from fullrun_mos1_xmm0106060901_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Jun  1 19:50:36 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 19:50:36 2012] Using photon index=1.80, rate=0.0124, arf fullrun_mos1_xmm0106060901_pi300-10000_pass1_cl_src9.arf
[Fri Jun  1 19:50:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 19:50:36 2012] Updating source flux to 1.8e-13
[Fri Jun  1 19:50:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting