[Tue Jun 25 22:51:54 2013] Detection parameters:
  Position = (197.7, 272.9) = 12 31 21.50 13 59 54.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 190.4 +/- 16.9
  Background counts = 10.2
  Rate = 0.01 +/- 0.001

[Tue Jun 25 22:51:54 2013] Off-axis axis estimate = 7.53'
[Tue Jun 25 23:16:00 2013] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 23:16:00 2013] Initial guess for spatial extent in simple fitting = 10.20"
[Tue Jun 25 23:16:00 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.113
[Tue Jun 25 23:16:00 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 10.20"
[Tue Jun 25 23:34:22 2013] fullrun_mos1_xmm0106060501_pi300-10000_cl_pass0_src2.ximg exists
[Tue Jun 25 23:34:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106060501_pi300-10000_cl_pass0_src2.csv
[Tue Jun 25 23:34:22 2013] fullrun_mos1_xmm0106060501_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Jun 25 23:34:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106060501_pi300-10000_cl_pass0_src2.csv
[Tue Jun 25 23:34:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0106060501_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0106060501_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 23:34:22 2013] fullrun_mos1_xmm0106060501_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Jun 25 23:34:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106060501_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue Jun 25 23:34:22 2013] fullrun_mos1_xmm0106060501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Jun 25 23:34:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106060501_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue Jun 25 23:34:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0106060501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0106060501_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 23:50:43 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 12.816433 pixels away
[Tue Jun 25 23:50:43 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 23:50:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 23:50:43 2013] Assessing source extent using major
[Tue Jun 25 23:50:43 2013] Source does appear to be extended
[Tue Jun 25 23:50:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 26 00:08:43 2013] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Wed Jun 26 00:08:43 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 26 00:08:43 2013] Initial guess for spatial extent in simple fitting = 10.20"
[Wed Jun 26 00:08:43 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.113
[Wed Jun 26 00:08:43 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 10.20"
[Wed Jun 26 00:25:24 2013] fullrun_mos1_xmm0106060501_pi300-10000_cl_pass1_src2.ximg exists
[Wed Jun 26 00:25:24 2013] fullrun_mos1_xmm0106060501_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Jun 26 00:25:25 2013] Fit fullrun_mos1_xmm0106060501_pi300-10000_cl_pass1_src2 appears to have run properly
[Wed Jun 26 00:25:25 2013] fullrun_mos1_xmm0106060501_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Jun 26 00:25:25 2013] fullrun_mos1_xmm0106060501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Jun 26 00:25:25 2013] Fit fullrun_mos1_xmm0106060501_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Jun 26 00:45:04 2013] Spatial fit model total counts = 212.160000, observed total counts = 206.000000
[Wed Jun 26 00:45:04 2013] Offset between fit and detection position for source 2 = 0.095155 pixels
[Wed Jun 26 00:45:04 2013] 213.343000 total counts/ 81.524000 bgd. counts: snr = 14.599409
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.095155 pixels
  Position = (197.8, 273.0) = 12 31 21.49 13 59 55.2
  Extent = 7.0 (5.8-8.6)" x 4.7 (4.6-4.7)", rotation angle = 81 (60-98) degrees
  Source counts = 131.8 +/- 14.6
  Background counts = 81.5
  Rate = 0.008 +/- 0.0009
[Wed Jun 26 00:45:04 2013] Vigneting correction estimate = 1.000000
[Wed Jun 26 00:45:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 26 00:45:04 2013] Assessing source extent using major axis lower bound
[Wed Jun 26 00:45:04 2013] Source does appear to be extended
[Wed Jun 26 00:45:04 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.25
[Wed Jun 26 01:05:26 2013] XMMSAS src. selection expression = ellipse(17156.927400, 23703.230820, 420.546012, 279.655208, 81.007245, X, Y)
[Wed Jun 26 01:05:26 2013] Writing source region out to fullrun_mos1_xmm0106060501_pi300-10000_pass1_cl_src2_src.reg
[Wed Jun 26 01:05:26 2013] Extracting stamp from image fullrun_mos1_xmm0106060501_pi300-10000_cl_sm2.00.img.gz, (174, 249) - (222, 297)
[Wed Jun 26 01:05:26 2013] XMMSAS bgd. selection expression = annulus(17156.927400, 23703.230820, 700.910020, 1401.820040, X, Y)
[Wed Jun 26 01:05:26 2013] Writing fullrun_mos1_xmm0106060501_pi300-10000_pass1_cl_src2.gif
[Wed Jun 26 01:05:39 2013] Mean detx,y = (-376.61, -10340.27) 
[Wed Jun 26 01:05:40 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 26 01:05:56 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 26 01:05:56 2013] Setting source spectrum file to fullrun_mos1_xmm0106060501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jun 26 01:05:56 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0106060501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Jun 26 01:22:58 2013] Updating aperture counts using extracted products
[Wed Jun 26 01:22:58 2013] Total counts from fullrun_mos1_xmm0106060501_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 144.00
[Wed Jun 26 01:22:58 2013] Total counts from fullrun_mos1_xmm0106060501_pi300-10000_pass1_cl_src2_bgd.pi.gz = 176.00
[Wed Jun 26 01:22:58 2013] Got source and background scale factors 365392.000000, 4310520.000000
[Wed Jun 26 01:22:58 2013] User source parameters:
  Position = (197.8, 273.0) = 12 31 21.49 13 59 55.2
  Extent = 7.0 (5.8-8.6)" x 4.7 (4.6-4.7)", rotation angle = 81 (60-98) degrees
  Source aperture counts = 129.1 +/- 13.0
  Background aperture counts = 14.9
  Rate = 0.008 +/- 0.0008

[Wed Jun 26 01:22:59 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 26 01:22:59 2013] Using photon index=1.80, rate=0.00845, arf fullrun_mos1_xmm0106060501_pi300-10000_pass1_cl_src2.arf
[Wed Jun 26 01:22:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 26 01:22:59 2013] Updating source flux to 1.9e-13
[Wed Jun 26 01:23:04 2013] xmm0106060501/analysis//spectral/fullrun_mos1_xmm0106060501_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete