[Fri May 31 18:32:47 2013] Detection parameters:
  Position = (370.1, 363.7) = 12 30 29.45 13 26 33.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.4 +/- 9.8
  Background counts = 9.6
  Rate = 0.01 +/- 0.003

[Fri May 31 18:32:48 2013] Off-axis axis estimate = 7.03'
[Fri May 31 18:35:22 2013] Using EEF radius (= 9.94 ")to estimate initial spatial extent for simple fitting
[Fri May 31 18:35:22 2013] Initial guess for spatial extent in simple fitting = 9.94"
[Fri May 31 18:35:22 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.967
[Fri May 31 18:35:22 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 9.94"
[Fri May 31 19:00:33 2013] fullrun_pn_xmm0106060301_pi300-10000_cl_pass0_src9.ximg exists
[Fri May 31 19:00:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106060301_pi300-10000_cl_pass0_src9.csv
[Fri May 31 19:00:33 2013] fullrun_pn_xmm0106060301_pi300-10000_cl_pass0_src9_1.ximg exists
[Fri May 31 19:00:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106060301_pi300-10000_cl_pass0_src9.csv
[Fri May 31 19:00:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0106060301_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0106060301_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 19:00:33 2013] fullrun_pn_xmm0106060301_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Fri May 31 19:00:33 2013] fullrun_pn_xmm0106060301_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Fri May 31 19:00:33 2013] Fit fullrun_pn_xmm0106060301_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Fri May 31 19:36:24 2013] Spatial fit model total counts = 170.890000, observed total counts = 155.000000
[Fri May 31 19:36:24 2013] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 19:36:24 2013] Vigneting correction estimate = 1.000000
[Fri May 31 19:36:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 19:36:24 2013] Assessing source extent using major
[Fri May 31 19:36:24 2013] Source does appear to be extended
[Fri May 31 19:36:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 19:36:39 2013] Using EEF radius (= 9.94 ")to estimate initial spatial extent for simple fitting
[Fri May 31 19:36:39 2013] Initial guess for spatial extent in simple fitting = 9.94"
[Fri May 31 19:36:39 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.967
[Fri May 31 19:36:39 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 9.94"
[Fri May 31 20:01:33 2013] fullrun_pn_xmm0106060301_pi300-10000_cl_pass1_src9.ximg exists
[Fri May 31 20:01:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106060301_pi300-10000_cl_pass1_src9.csv
[Fri May 31 20:01:33 2013] fullrun_pn_xmm0106060301_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri May 31 20:01:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106060301_pi300-10000_cl_pass1_src9.csv
[Fri May 31 20:01:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0106060301_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0106060301_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 20:01:33 2013] fullrun_pn_xmm0106060301_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri May 31 20:01:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106060301_pi300-10000_cl_pass1_tfrozen_src9.csv
[Fri May 31 20:01:33 2013] fullrun_pn_xmm0106060301_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri May 31 20:01:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106060301_pi300-10000_cl_pass1_tfrozen_src9.csv
[Fri May 31 20:01:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0106060301_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0106060301_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 20:33:57 2013] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 12.205642 pixels away
[Fri May 31 20:33:57 2013] Spatial fit model total counts = 173.201000, observed total counts = 155.000000
[Fri May 31 20:33:57 2013] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 20:33:57 2013] Vigneting correction estimate = 1.000000
[Fri May 31 20:33:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 20:33:57 2013] Assessing source extent using major
[Fri May 31 20:33:57 2013] Source does appear to be extended
[Fri May 31 20:33:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 20:34:13 2013] XMMSAS src. selection expression = ellipse(32151.307678, 31590.684967, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 31 20:34:13 2013] Writing source region out to fullrun_pn_xmm0106060301_pi300-10000_pass1_cl_src9_src.reg
[Fri May 31 20:34:13 2013] Extracting stamp from image fullrun_pn_xmm0106060301_pi300-10000_cl_sm2.00.img.gz, (333, 326) - (408, 401)
[Fri May 31 20:34:13 2013] XMMSAS bgd. selection expression = annulus(32151.307678, 31590.684967, 1087.500000, 2175.000000, X, Y) && !ellipse(29500.080383, 34385.169678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30872.899200, 32042.515600, 656.151219, 285.757608, 63.207332, X, Y)
[Fri May 31 20:34:13 2013] Writing fullrun_pn_xmm0106060301_pi300-10000_pass1_cl_src9.gif
[Fri May 31 20:39:35 2013] Mean detx,y = (6999.34, -569.22) 
[Fri May 31 20:39:39 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 31 20:40:21 2013] Binned source spectrum to 10 counts/bin
[Fri May 31 20:40:21 2013] Setting source spectrum file to fullrun_pn_xmm0106060301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri May 31 20:40:21 2013] Setting bgd. spectrum file to fullrun_pn_xmm0106060301_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Fri May 31 20:51:53 2013] Not generating rmf since there are only 54 counts
[Fri May 31 20:51:53 2013] rmf not generated due to insufficient counts
[Fri May 31 21:02:52 2013] Updating aperture counts using extracted products
[Fri May 31 21:02:52 2013] Total counts from fullrun_pn_xmm0106060301_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 119.00
[Fri May 31 21:02:52 2013] Total counts from fullrun_pn_xmm0106060301_pi300-10000_pass1_cl_src9_bgd.pi.gz = 537.00
[Fri May 31 21:02:52 2013] Got source and background scale factors 1007866.000000, 9063020.000000
[Fri May 31 21:02:52 2013] User source parameters:
  Position = (370.1, 363.7) = 12 30 29.45 13 26 33.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 59.3 +/- 11.9
  Background aperture counts = 59.7
  Rate = 0.01 +/- 0.002

[Fri May 31 21:02:52 2013] Updating counts from extracted products
[Fri May 31 21:02:52 2013] Set source signif. to 59.28/7.73 = 7.67
[Fri May 31 21:02:55 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 31 21:02:55 2013] Using photon index=1.80, rate=0.0107, arf fullrun_pn_xmm0106060301_pi300-10000_pass1_cl_src9.arf
[Fri May 31 21:02:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 31 21:02:55 2013] Updating source flux to 4e-14
[Fri May 31 21:03:05 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 31 21:03:08 2013] xmm0106060301/analysis//spectral/fullrun_pn_xmm0106060301_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete