[Tue Aug 21 10:38:34 2012] Detection parameters:
  Position = (314.5, 270.1) = 7 47 24.01 -19 18 6.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 345.2 +/- 36.0
  Background counts = 160.8
  Rate = 0.02 +/- 0.002

[Tue Aug 21 10:38:34 2012] Off-axis axis estimate = 2.36'
[Tue Aug 21 13:28:08 2012] Using EEF radius (= 7.61 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 13:28:08 2012] Initial guess for spatial extent in simple fitting = 7.61"
[Tue Aug 21 13:28:08 2012] source mask rpix=1.7, npix_max = 20, mask sum = 12, frac = 0.593
[Tue Aug 21 13:28:08 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.61"
[Tue Aug 21 14:50:34 2012] fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_src6.ximg exists
[Tue Aug 21 14:50:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_src6.csv
[Tue Aug 21 14:50:34 2012] fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue Aug 21 14:50:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_src6.csv
[Tue Aug 21 14:50:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 14:50:34 2012] fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue Aug 21 14:50:34 2012] fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Aug 21 14:50:34 2012] Fit fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Tue Aug 21 14:50:59 2012] Warning, spatial fit 6 centroid is now closest to src. 8
[Tue Aug 21 14:50:59 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 14:50:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 14:50:59 2012] Assessing source extent using major
[Tue Aug 21 14:50:59 2012] Source does appear to be extended
[Tue Aug 21 14:50:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 16:41:10 2012] Using EEF radius (= 7.61 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 16:41:10 2012] Initial guess for spatial extent in simple fitting = 7.61"
[Tue Aug 21 16:41:10 2012] source mask rpix=1.7, npix_max = 20, mask sum = 12, frac = 0.593
[Tue Aug 21 16:41:10 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 7.61"
[Tue Aug 21 17:55:46 2012] fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_src6.ximg exists
[Tue Aug 21 17:55:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_src6.csv
[Tue Aug 21 17:55:46 2012] fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue Aug 21 17:55:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_src6.csv
[Tue Aug 21 17:55:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 17:55:47 2012] fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue Aug 21 17:55:47 2012] fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue Aug 21 17:55:47 2012] Fit fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Tue Aug 21 17:55:57 2012] Warning, spatial fit 6 centroid is now closest to src. 3
[Tue Aug 21 17:55:57 2012] Source 9 is offset by 7.251203 and -3.978951 pixels which is larger than
2 X fitted extent = 4.108451 x 4.108451, not incorporating fit results
[Tue Aug 21 17:55:57 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 17:55:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 17:55:57 2012] Assessing source extent using major
[Tue Aug 21 17:55:57 2012] Source does appear to be extended
[Tue Aug 21 17:55:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 17:55:57 2012] Source is confused with source 5
[Tue Aug 21 20:30:42 2012] XMMSAS src. selection expression = ellipse(27313.002655, 23453.073273, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 21 20:30:42 2012] Writing source region out to fullrun_mos2_xmm0105870101_pi300-10000_pass1_cl_src9_src.reg
[Tue Aug 21 20:30:42 2012] Extracting stamp from image fullrun_mos2_xmm0105870101_pi300-10000_cl_sm2.00.img.gz, (277, 233) - (352, 308)
[Tue Aug 21 20:30:42 2012] XMMSAS bgd. selection expression = annulus(27313.002655, 23453.073273, 1087.500000, 2175.000000, X, Y) && !ellipse(25272.084000, 23983.784000, 3560.304102, 3560.304102, 0.000000, X, Y) && !ellipse(26055.800000, 24230.168400, 1152.520033, 1152.520033, -0.000000, X, Y) && !ellipse(24397.175140, 23864.440857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26077.024000, 22970.710000, 2566.432074, 2449.056070, 320.952324, X, Y) && !ellipse(27313.002655, 24226.778015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24869.178284, 25841.104858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27655.769592, 24829.764374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28104.162000, 25736.210000, 1144.288033, 1144.288033, 0.000000, X, Y) && !ellipse(27408.494000, 21744.566000, 1283.216037, 1283.216037, 0.000000, X, Y)
[Tue Aug 21 20:30:42 2012] Writing fullrun_mos2_xmm0105870101_pi300-10000_pass1_cl_src9.gif
[Tue Aug 21 20:52:23 2012] Mean detx,y = (1759.79, 1069.41) 
[Tue Aug 21 20:52:24 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 20:52:34 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 20:52:34 2012] Setting source spectrum file to fullrun_mos2_xmm0105870101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Tue Aug 21 20:52:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0105870101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Tue Aug 21 21:09:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 21 21:09:59 2012] rmf not generated due to insufficient counts
[Tue Aug 21 21:24:01 2012] Updating aperture counts using extracted products
[Tue Aug 21 21:24:01 2012] Error reading totcts from fullrun_mos2_xmm0105870101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Tue Aug 21 21:24:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 21:24:02 2012] Using photon index=1.80, rate=0.0168, arf fullrun_mos2_xmm0105870101_pi300-10000_pass1_cl_src9.arf
[Tue Aug 21 21:24:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 21:24:02 2012] Updating source flux to 2.2e-13
[Tue Aug 21 21:25:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting