[Tue Aug 21 10:38:34 2012] Detection parameters:
  Position = (281.0, 274.9) = 7 47 34.31 -19 17 46.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4758.7 +/- 89.4
  Background counts = 266.1
  Rate = 0.2 +/- 0.004

[Tue Aug 21 10:38:34 2012] Off-axis axis estimate = 2.13'
[Tue Aug 21 13:28:08 2012] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 13:28:08 2012] Initial guess for spatial extent in simple fitting = 7.49"
[Tue Aug 21 13:28:08 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.810
[Tue Aug 21 13:28:08 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.49"
[Tue Aug 21 14:50:34 2012] fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_src3.ximg exists
[Tue Aug 21 14:50:34 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_src3.csv
[Tue Aug 21 14:50:34 2012] fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Aug 21 14:50:34 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_src3.csv
[Tue Aug 21 14:50:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 14:50:34 2012] fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Aug 21 14:50:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Aug 21 14:50:34 2012] fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Aug 21 14:50:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Aug 21 14:50:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 14:50:59 2012] Source 2 is offset by -6.733688 and -1.126970 pixels which is larger than
2 X fitted extent = 6.718437 x 6.718437, not incorporating fit results
[Tue Aug 21 14:50:59 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 14:50:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 14:50:59 2012] Assessing source extent using major
[Tue Aug 21 14:50:59 2012] Source does appear to be extended
[Tue Aug 21 14:50:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 16:41:10 2012] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 16:41:10 2012] Initial guess for spatial extent in simple fitting = 7.49"
[Tue Aug 21 16:41:10 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.810
[Tue Aug 21 16:41:10 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.49"
[Tue Aug 21 17:55:46 2012] fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_src3.ximg exists
[Tue Aug 21 17:55:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_src3.csv
[Tue Aug 21 17:55:46 2012] fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Aug 21 17:55:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_src3.csv
[Tue Aug 21 17:55:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 17:55:47 2012] fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Aug 21 17:55:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Aug 21 17:55:47 2012] fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Aug 21 17:55:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Aug 21 17:55:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 17:55:57 2012] Source 2 is offset by -0.388175 and -5.582220 pixels which is larger than
2 X fitted extent = 0.988216 x 0.988216, not incorporating fit results
[Tue Aug 21 17:55:57 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 17:55:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 17:55:57 2012] Assessing source extent using major
[Tue Aug 21 17:55:57 2012] Source does appear to be extended
[Tue Aug 21 17:55:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 17:55:57 2012] Source is confused with source 1
[Tue Aug 21 20:30:42 2012] Counts = 4758.675781, rescaling region sizes by 2.000000
[Tue Aug 21 20:30:42 2012] XMMSAS src. selection expression = ellipse(24397.175140, 23864.440857, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Aug 21 20:30:42 2012] Writing source region out to fullrun_mos2_xmm0105870101_pi300-10000_pass1_cl_src2_src.reg
[Tue Aug 21 20:30:42 2012] Extracting stamp from image fullrun_mos2_xmm0105870101_pi300-10000_cl_sm2.00.img.gz, (206, 200) - (356, 350)
[Tue Aug 21 20:30:42 2012] XMMSAS bgd. selection expression = annulus(24397.175140, 23864.440857, 4350.000000, 8700.000000, X, Y) && !ellipse(25272.084000, 23983.784000, 3560.304102, 3560.304102, 0.000000, X, Y) && !ellipse(26055.800000, 24230.168400, 1152.520033, 1152.520033, -0.000000, X, Y) && !ellipse(23868.306580, 26339.246765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23962.100800, 25126.862152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26077.024000, 22970.710000, 2566.432074, 2449.056070, 320.952324, X, Y) && !ellipse(27313.002655, 23453.073273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27313.002655, 24226.778015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24869.178284, 25841.104858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22128.884048, 24356.385925, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(26606.151550, 18189.392731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27655.769592, 24829.764374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28104.162000, 25736.210000, 1144.288033, 1144.288033, 0.000000, X, Y) && !ellipse(27408.494000, 21744.566000, 1283.216037, 1283.216037, 0.000000, X, Y)
[Tue Aug 21 20:30:42 2012] Writing fullrun_mos2_xmm0105870101_pi300-10000_pass1_cl_src2.gif
[Tue Aug 21 20:47:26 2012] Mean detx,y = (-461.19, -13.23) 
[Tue Aug 21 20:47:28 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 20:50:31 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 20:50:31 2012] Setting source spectrum file to fullrun_mos2_xmm0105870101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Aug 21 20:50:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0105870101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Aug 21 21:03:15 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 21 21:03:15 2012] rmf not generated due to insufficient counts
[Tue Aug 21 21:24:01 2012] Updating aperture counts using extracted products
[Tue Aug 21 21:24:01 2012] Error reading totcts from fullrun_mos2_xmm0105870101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Aug 21 21:24:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 21:24:02 2012] Using photon index=1.80, rate=0.199, arf fullrun_mos2_xmm0105870101_pi300-10000_pass1_cl_src2.arf
[Tue Aug 21 21:24:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 21:24:02 2012] Updating source flux to 1.8e-12
[Tue Aug 21 21:25:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting