[Tue Aug 21 10:38:34 2012] Detection parameters:
  Position = (254.9, 280.5) = 7 47 42.32 -19 17 24.1
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 243.4 +/- 23.8
  Background counts = 692.7
  Rate = 0.01 +/- 0.001

[Tue Aug 21 10:38:34 2012] Off-axis axis estimate = 3.41'
[Tue Aug 21 13:28:08 2012] Using EEF radius (= 8.13 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 13:28:08 2012] Initial guess for spatial extent in simple fitting = 8.13"
[Tue Aug 21 13:28:08 2012] source mask rpix=1.9, npix_max = 22, mask sum = 12, frac = 0.534
[Tue Aug 21 13:28:08 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 8.13"
[Tue Aug 21 14:50:34 2012] fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_src9.ximg exists
[Tue Aug 21 14:50:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_src9.csv
[Tue Aug 21 14:50:34 2012] fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_src9_1.ximg exists
[Tue Aug 21 14:50:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_src9.csv
[Tue Aug 21 14:50:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 14:50:34 2012] fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Tue Aug 21 14:50:34 2012] fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Tue Aug 21 14:50:34 2012] Fit fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Tue Aug 21 14:50:59 2012] Source 11 is offset by -7.567839 and 6.228459 pixels which is larger than
2 X fitted extent = 6.564394 x 6.564394, not incorporating fit results
[Tue Aug 21 14:50:59 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 14:50:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 14:50:59 2012] Assessing source extent using major
[Tue Aug 21 14:50:59 2012] Source does appear to be extended
[Tue Aug 21 14:50:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 16:41:10 2012] Using EEF radius (= 8.13 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 16:41:10 2012] Initial guess for spatial extent in simple fitting = 8.13"
[Tue Aug 21 16:41:10 2012] source mask rpix=1.9, npix_max = 22, mask sum = 12, frac = 0.534
[Tue Aug 21 16:41:10 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 8.13"
[Tue Aug 21 17:55:47 2012] fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_src9.ximg exists
[Tue Aug 21 17:55:47 2012] fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue Aug 21 17:55:47 2012] Fit fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_src9 appears to have run properly
[Tue Aug 21 17:55:47 2012] fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue Aug 21 17:55:47 2012] fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue Aug 21 17:55:47 2012] Fit fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Tue Aug 21 17:55:57 2012] Source 11 is offset by -7.567839 and 6.232574 pixels which is larger than
2 X fitted extent = 6.589025 x 6.589025, not incorporating fit results
[Tue Aug 21 17:55:57 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 17:55:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 17:55:57 2012] Assessing source extent using major
[Tue Aug 21 17:55:57 2012] Source does appear to be extended
[Tue Aug 21 17:55:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 20:30:42 2012] XMMSAS src. selection expression = ellipse(22128.884048, 24356.385925, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Aug 21 20:30:42 2012] Writing source region out to fullrun_mos2_xmm0105870101_pi300-10000_pass1_cl_src11_src.reg
[Tue Aug 21 20:30:42 2012] Extracting stamp from image fullrun_mos2_xmm0105870101_pi300-10000_cl_sm2.00.img.gz, (180, 206) - (330, 356)
[Tue Aug 21 20:30:42 2012] XMMSAS bgd. selection expression = annulus(22128.884048, 24356.385925, 2175.000000, 4350.000000, X, Y) && !ellipse(25272.084000, 23983.784000, 3560.304102, 3560.304102, 0.000000, X, Y) && !ellipse(26055.800000, 24230.168400, 1152.520033, 1152.520033, -0.000000, X, Y) && !ellipse(24397.175140, 23864.440857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23868.306580, 26339.246765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23962.100800, 25126.862152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26077.024000, 22970.710000, 2566.432074, 2449.056070, 320.952324, X, Y) && !ellipse(27313.002655, 23453.073273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27313.002655, 24226.778015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24869.178284, 25841.104858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27408.494000, 21744.566000, 1283.216037, 1283.216037, 0.000000, X, Y)
[Tue Aug 21 20:30:42 2012] Writing fullrun_mos2_xmm0105870101_pi300-10000_pass1_cl_src11.gif
[Tue Aug 21 20:53:08 2012] Mean detx,y = (-2573.64, -988.34) 
[Tue Aug 21 20:53:09 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 20:53:35 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 20:53:35 2012] Setting source spectrum file to fullrun_mos2_xmm0105870101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Aug 21 20:53:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0105870101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Tue Aug 21 21:10:21 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 21 21:10:21 2012] rmf not generated due to insufficient counts
[Tue Aug 21 21:24:01 2012] Updating aperture counts using extracted products
[Tue Aug 21 21:24:02 2012] Error reading totcts from fullrun_mos2_xmm0105870101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Aug 21 21:24:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 21:24:02 2012] Using photon index=1.80, rate=0.012, arf fullrun_mos2_xmm0105870101_pi300-10000_pass1_cl_src11.arf
[Tue Aug 21 21:24:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 21:24:02 2012] Updating source flux to 1.2e-13
[Tue Aug 21 21:25:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting