[Tue Aug 21 10:38:34 2012] Detection parameters:
  Position = (290.2, 276.0) = 7 47 31.49 -19 17 41.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 20645.2 +/- 171.9
  Background counts = 262.2
  Rate = 0.8 +/- 0.007

[Tue Aug 21 10:38:34 2012] Off-axis axis estimate = 1.73'
[Tue Aug 21 13:28:08 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 13:28:08 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Tue Aug 21 13:28:08 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Tue Aug 21 13:28:08 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Tue Aug 21 14:50:34 2012] fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug 21 14:50:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_src1.csv
[Tue Aug 21 14:50:34 2012] fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug 21 14:50:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_src1.csv
[Tue Aug 21 14:50:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 14:50:34 2012] fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug 21 14:50:34 2012] fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug 21 14:50:34 2012] Fit fullrun_mos2_xmm0105870101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Aug 21 14:50:59 2012] Spatial fit model total counts = 44225.300000, observed total counts = 40363.000000
[Tue Aug 21 14:50:59 2012] Offset between fit and detection position for source 1 = 0.408822 pixels
[Tue Aug 21 14:50:59 2012] 42009.300000 total counts/ 23091.200000 bgd. counts: snr = 124.495675
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.408822 pixels
  Position = (289.8, 275.9) = 7 47 31.61 -19 17 42.1
  Extent = 12.1 (11.7-12.5)", rotation angle = 0
  Source counts = 18918.1 +/- 205.0
  Background counts = 23091.2
  Rate = 0.8 +/- 0.009
[Tue Aug 21 14:50:59 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 14:50:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 14:50:59 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 14:50:59 2012] Source does appear to be extended
[Tue Aug 21 14:50:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 16:41:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 21 16:41:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 21 16:41:10 2012] Initial guess for spatial extent in simple fitting = 12.11"
[Tue Aug 21 16:41:10 2012] source mask rpix=2.8, npix_max = 43, mask sum = 39, frac = 0.904
[Tue Aug 21 16:41:10 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.11"
[Tue Aug 21 17:55:46 2012] fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Aug 21 17:55:46 2012] fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Aug 21 17:55:46 2012] Fit fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Aug 21 17:55:47 2012] fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Aug 21 17:55:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Aug 21 17:55:47 2012] fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Aug 21 17:55:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Aug 21 17:55:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105870101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 17:55:57 2012] Warning, spatial fit 1 centroid is now closest to src. 3
[Tue Aug 21 17:55:57 2012] Spatial fit model total counts = 36298.100000, observed total counts = 34940.000000
[Tue Aug 21 17:55:57 2012] Offset between fit and detection position for source 1 = 1.302154 pixels
[Tue Aug 21 17:55:57 2012] Warning, changing simple spatial fit ID from 1 to 2
[Tue Aug 21 17:55:57 2012] 35487.800000 total counts/ 20156.000000 bgd. counts: snr = 107.991847
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.302154 pixels
  Position = (291.0, 276.2) = 7 47 31.22 -19 17 40.9
  Extent = 14.8 (14.2-15.3)", rotation angle = 0
  Source counts = 15331.8 +/- 188.4
  Background counts = 20156.0
  Rate = 0.6 +/- 0.008
[Tue Aug 21 17:55:57 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 17:55:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 17:55:57 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 17:55:57 2012] Source does appear to be extended
[Tue Aug 21 17:55:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 17:55:57 2012] Source is confused with source 3
[Tue Aug 21 17:55:57 2012] Source is confused with source 2
[Tue Aug 21 17:55:57 2012] Source is confused with source 5
[Tue Aug 21 20:30:41 2012] Counts = 15331.800000, rescaling region sizes by 3.000000
[Tue Aug 21 20:30:41 2012] XMMSAS src. selection expression = ellipse(25272.084000, 23983.784000, 2670.228077, 2670.228077, 0.000000, X, Y)
[Tue Aug 21 20:30:41 2012] Writing source region out to fullrun_mos2_xmm0105870101_pi300-10000_pass1_cl_src1_src.reg
[Tue Aug 21 20:30:41 2012] Extracting stamp from image fullrun_mos2_xmm0105870101_pi300-10000_cl_sm2.00.img.gz, (138, 123) - (445, 430)
[Tue Aug 21 20:30:42 2012] XMMSAS bgd. selection expression = annulus(25272.084000, 23983.784000, 13351.140384, 26702.280768, X, Y) && !ellipse(26055.800000, 24230.168400, 1152.520033, 1152.520033, -0.000000, X, Y) && !ellipse(24397.175140, 23864.440857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23868.306580, 26339.246765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23962.100800, 25126.862152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26077.024000, 22970.710000, 2566.432074, 2449.056070, 320.952324, X, Y) && !ellipse(27313.002655, 23453.073273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27313.002655, 24226.778015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24869.178284, 25841.104858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22128.884048, 24356.385925, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(26606.151550, 18189.392731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27655.769592, 24829.764374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28104.162000, 25736.210000, 1144.288033, 1144.288033, 0.000000, X, Y) && !ellipse(27408.494000, 21744.566000, 1283.216037, 1283.216037, 0.000000, X, Y)
[Tue Aug 21 20:30:42 2012] Writing fullrun_mos2_xmm0105870101_pi300-10000_pass1_cl_src1.gif
[Tue Aug 21 20:30:51 2012] Mean detx,y = (-97.24, 22.23) 
[Tue Aug 21 20:30:53 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 20:41:46 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 20:41:46 2012] Setting source spectrum file to fullrun_mos2_xmm0105870101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 21 20:41:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0105870101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Aug 21 21:24:01 2012] Updating aperture counts using extracted products
[Tue Aug 21 21:24:01 2012] Error reading totcts from fullrun_mos2_xmm0105870101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 21 21:24:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 21:24:02 2012] Using photon index=1.80, rate=0.642, arf fullrun_mos2_xmm0105870101_pi300-10000_pass1_cl_src1.arf
[Tue Aug 21 21:24:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 21:24:02 2012] Updating source flux to 5.3e-12
[Tue Aug 21 21:25:02 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Tue Aug 21 21:26:21 2012] Reading fit data from xmm0105870101/analysis//spectral/fullrun_mos2_xmm0105870101_pi300-10000_pass1_cl_src1_pl.csv
[Tue Aug 21 21:26:21 2012] Spectral fit parameter nH value = 5.06374e+21
[Tue Aug 21 21:26:21 2012] Spectral fit parameter PhoIndex value = 1.89587
[Tue Aug 21 21:26:21 2012] Failed to get F(0.3-8.0) from xmm0105870101/analysis//spectral/fullrun_mos2_xmm0105870101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Aug 21 21:26:21 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 21:26:21 2012] Using Nh = 5.1e+21, photon index=1.90, rate=0.642, arf fullrun_mos2_xmm0105870101_pi300-10000_pass1_cl_src1.arf
[Tue Aug 21 21:26:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 21:26:21 2012] Updating source flux to 7.3e-12