[Tue Aug 21 10:37:56 2012] Detection parameters:
  Position = (324.7, 288.0) = 7 47 20.89 -19 16 46.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.6 +/- 18.4
  Background counts = 117.1
  Rate = 0.003 +/- 0.0008

[Tue Aug 21 10:37:56 2012] Off-axis axis estimate = 2.05'
[Tue Aug 21 12:17:15 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 12:17:15 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Tue Aug 21 12:17:15 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.021
[Tue Aug 21 12:17:15 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 7.45"
[Tue Aug 21 13:28:08 2012] fullrun_mos1_xmm0105870101_pi300-10000_cl_pass0_src23.ximg exists
[Tue Aug 21 13:28:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105870101_pi300-10000_cl_pass0_src23.csv
[Tue Aug 21 13:28:08 2012] fullrun_mos1_xmm0105870101_pi300-10000_cl_pass0_src23_1.ximg exists
[Tue Aug 21 13:28:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105870101_pi300-10000_cl_pass0_src23.csv
[Tue Aug 21 13:28:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105870101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105870101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 13:28:08 2012] fullrun_mos1_xmm0105870101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Tue Aug 21 13:28:08 2012] fullrun_mos1_xmm0105870101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Tue Aug 21 13:28:08 2012] Fit fullrun_mos1_xmm0105870101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Tue Aug 21 14:50:53 2012] Source 12 is offset by -6.707109 and 0.209510 pixels which is larger than
2 X fitted extent = 0.873853 x 0.873853, not incorporating fit results
[Tue Aug 21 14:50:53 2012] Spatial fit model total counts = 1598.900000, observed total counts = 1593.000000
[Tue Aug 21 14:50:53 2012] Offset between fit and detection position for source 12 = 8.057029 pixels
[Tue Aug 21 14:50:53 2012] 1485.539000 total counts/ 1315.500000 bgd. counts: snr = 4.688167
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 8.057029 pixels
  Position = (330.9, 293.2) = 7 47 18.99 -19 16 27.1
  Extent = 14.9 (14.9-29.8)", rotation angle = 0
  Source counts = 170.0 +/- 38.5
  Background counts = 1315.5
  Rate = 0.007 +/- 0.002
[Tue Aug 21 14:50:53 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 14:50:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 14:50:53 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 14:50:53 2012] Source does appear to be extended
[Tue Aug 21 14:50:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 15:50:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 21 15:50:33 2012] Initial guess for spatial extent in simple fitting = 14.90"
[Tue Aug 21 15:50:33 2012] source mask rpix=3.4, npix_max = 61, mask sum = 64, frac = 1.038
[Tue Aug 21 15:50:33 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 14.90"
[Tue Aug 21 16:41:09 2012] fullrun_mos1_xmm0105870101_pi300-10000_cl_pass1_src16.ximg exists
[Tue Aug 21 16:41:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105870101_pi300-10000_cl_pass1_src16.csv
[Tue Aug 21 16:41:09 2012] fullrun_mos1_xmm0105870101_pi300-10000_cl_pass1_src16_1.ximg exists
[Tue Aug 21 16:41:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105870101_pi300-10000_cl_pass1_src16.csv
[Tue Aug 21 16:41:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105870101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105870101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 16:41:10 2012] fullrun_mos1_xmm0105870101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Tue Aug 21 16:41:10 2012] fullrun_mos1_xmm0105870101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Tue Aug 21 16:41:10 2012] Fit fullrun_mos1_xmm0105870101_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Tue Aug 21 17:55:55 2012] Source 12 is offset by -0.548782 and 5.466161 pixels which is larger than
2 X fitted extent = 0.913140 x 0.913140, not incorporating fit results
[Tue Aug 21 17:55:55 2012] Warning, spatial fit 16 centroid is now closest to src. 6
[Tue Aug 21 17:55:55 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 17:55:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 17:55:55 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 17:55:55 2012] Source does appear to be extended
[Tue Aug 21 17:55:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 18:57:45 2012] XMMSAS src. selection expression = ellipse(28735.676000, 25459.516000, 894.264026, 894.264026, 0.000000, X, Y)
[Tue Aug 21 18:57:45 2012] Writing source region out to fullrun_mos1_xmm0105870101_pi300-10000_pass1_cl_src12_src.reg
[Tue Aug 21 18:57:45 2012] Extracting stamp from image fullrun_mos1_xmm0105870101_pi300-10000_cl_sm2.00.img.gz, (279, 242) - (382, 345)
[Tue Aug 21 18:57:45 2012] XMMSAS bgd. selection expression = annulus(28735.676000, 25459.516000, 1490.440043, 2980.880086, X, Y) && !ellipse(25197.047000, 23972.568400, 3497.952101, 3497.952101, 0.000000, X, Y) && !ellipse(24430.426000, 22453.340000, 1329.680038, 1329.680038, 0.000000, X, Y) && !ellipse(25966.010712, 22251.114960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27243.727631, 23710.337646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26673.315826, 22449.992584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25358.112549, 26041.617981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25758.576000, 21493.172000, 1286.656037, 1286.656037, 0.000000, X, Y)
[Tue Aug 21 18:57:45 2012] Writing fullrun_mos1_xmm0105870101_pi300-10000_pass1_cl_src12.gif
[Tue Aug 21 19:11:01 2012] Mean detx,y = (-131.10, -3820.01) 
[Tue Aug 21 19:11:02 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 19:11:23 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 19:11:23 2012] Setting source spectrum file to fullrun_mos1_xmm0105870101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue Aug 21 19:11:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0105870101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Tue Aug 21 21:24:00 2012] Updating aperture counts using extracted products
[Tue Aug 21 21:24:00 2012] Error reading totcts from fullrun_mos1_xmm0105870101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue Aug 21 21:24:01 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 21:24:01 2012] Using photon index=1.80, rate=0.00708, arf fullrun_mos1_xmm0105870101_pi300-10000_pass1_cl_src12.arf
[Tue Aug 21 21:24:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 21:24:01 2012] Updating source flux to 7.3e-14
[Tue Aug 21 21:24:03 2012] Flag b found in src. 12 procflags, skipping spectral fitting