[Thu May  9 06:41:14 2013] Detection parameters:
  Position = (309.2, 229.9) = 13 20 8.81 33 5 18.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 219.3 +/- 20.5
  Background counts = 47.1
  Rate = 0.01 +/- 0.001

[Thu May  9 06:41:15 2013] Off-axis axis estimate = 5.03'
[Thu May  9 06:43:56 2013] Using EEF radius (= 8.94 ")to estimate initial spatial extent for simple fitting
[Thu May  9 06:43:56 2013] Initial guess for spatial extent in simple fitting = 8.94"
[Thu May  9 06:43:56 2013] source mask rpix=2.1, npix_max = 26, mask sum = 21, frac = 0.804
[Thu May  9 06:43:56 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 8.94"
[Thu May  9 09:31:29 2013] fullrun_pn_xmm0105860101_pi300-10000_cl_pass0_src33.ximg exists
[Thu May  9 09:31:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105860101_pi300-10000_cl_pass0_src33.csv
[Thu May  9 09:31:29 2013] fullrun_pn_xmm0105860101_pi300-10000_cl_pass0_src33_1.ximg exists
[Thu May  9 09:31:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105860101_pi300-10000_cl_pass0_src33.csv
[Thu May  9 09:31:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105860101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105860101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 09:31:31 2013] fullrun_pn_xmm0105860101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Thu May  9 09:31:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105860101_pi300-10000_cl_pass0_tfrozen_src33.csv
[Thu May  9 09:31:31 2013] fullrun_pn_xmm0105860101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Thu May  9 09:31:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105860101_pi300-10000_cl_pass0_tfrozen_src33.csv
[Thu May  9 09:31:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105860101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105860101_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 12:27:06 2013] Warning, spatial fit 33 centroid is now closest to src. 36
[Thu May  9 12:27:06 2013] Vigneting correction estimate = 1.000000
[Thu May  9 12:27:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 12:27:06 2013] Assessing source extent using major
[Thu May  9 12:27:06 2013] Source does appear to be extended
[Thu May  9 12:27:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 12:27:35 2013] Using EEF radius (= 8.94 ")to estimate initial spatial extent for simple fitting
[Thu May  9 12:27:35 2013] Initial guess for spatial extent in simple fitting = 8.94"
[Thu May  9 12:27:35 2013] source mask rpix=2.1, npix_max = 26, mask sum = 21, frac = 0.804
[Thu May  9 12:27:35 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 8.94"
[Thu May  9 14:34:59 2013] fullrun_pn_xmm0105860101_pi300-10000_cl_pass1_src33.ximg exists
[Thu May  9 14:34:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105860101_pi300-10000_cl_pass1_src33.csv
[Thu May  9 14:34:59 2013] fullrun_pn_xmm0105860101_pi300-10000_cl_pass1_src33_1.ximg exists
[Thu May  9 14:34:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105860101_pi300-10000_cl_pass1_src33.csv
[Thu May  9 14:34:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105860101_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105860101_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 14:35:00 2013] fullrun_pn_xmm0105860101_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Thu May  9 14:35:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105860101_pi300-10000_cl_pass1_tfrozen_src33.csv
[Thu May  9 14:35:00 2013] fullrun_pn_xmm0105860101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Thu May  9 14:35:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105860101_pi300-10000_cl_pass1_tfrozen_src33.csv
[Thu May  9 14:35:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105860101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105860101_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 17:05:15 2013] Warning, spatial fit 33 centroid is now closest to src. 36
[Thu May  9 17:05:15 2013] Vigneting correction estimate = 1.000000
[Thu May  9 17:05:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 17:05:15 2013] Assessing source extent using major
[Thu May  9 17:05:15 2013] Source does appear to be extended
[Thu May  9 17:05:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 17:05:43 2013] XMMSAS src. selection expression = ellipse(26851.595734, 19956.366501, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May  9 17:05:43 2013] Writing source region out to fullrun_pn_xmm0105860101_pi300-10000_pass1_cl_src35_src.reg
[Thu May  9 17:05:43 2013] Extracting stamp from image fullrun_pn_xmm0105860101_pi300-10000_cl_sm2.00.img.gz, (272, 192) - (347, 267)
[Thu May  9 17:05:43 2013] XMMSAS bgd. selection expression = annulus(26851.595734, 19956.366501, 1087.500000, 2175.000000, X, Y) && !ellipse(28436.411926, 18475.018127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24050.165466, 22756.903351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25912.116272, 22714.590149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24644.849280, 21528.889800, 506.393615, 506.393615, 0.000000, X, Y) && !ellipse(25742.082886, 19096.548538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26486.399109, 22914.667847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25093.557465, 22359.519806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26407.008423, 21771.937927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25493.107513, 21289.934616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25773.229034, 20281.542542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25441.748627, 17441.695328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28086.370209, 17222.530624, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  9 17:05:43 2013] Writing fullrun_pn_xmm0105860101_pi300-10000_pass1_cl_src35.gif
[Thu May  9 17:20:11 2013] Mean detx,y = (195.69, -4411.93) 
[Thu May  9 17:20:12 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  9 17:20:21 2013] Binned source spectrum to 10 counts/bin
[Thu May  9 17:20:21 2013] Setting source spectrum file to fullrun_pn_xmm0105860101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Thu May  9 17:20:21 2013] Setting bgd. spectrum file to fullrun_pn_xmm0105860101_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Thu May  9 18:05:10 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May  9 18:05:10 2013] rmf not generated due to insufficient counts
[Thu May  9 19:50:15 2013] Updating aperture counts using extracted products
[Thu May  9 19:50:15 2013] Total counts from fullrun_pn_xmm0105860101_pi300-10000_pass1_cl_src35_src_b10.pi.gz = 627.00
[Thu May  9 19:50:15 2013] Total counts from fullrun_pn_xmm0105860101_pi300-10000_pass1_cl_src35_bgd.pi.gz = 1325.00
[Thu May  9 19:50:15 2013] Got source and background scale factors 1068954.000000, 4822903.000000
[Thu May  9 19:50:15 2013] User source parameters:
  Position = (309.2, 229.9) = 13 20 8.81 33 5 18.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 333.3 +/- 26.1
  Background aperture counts = 293.7
  Rate = 0.01 +/- 0.0009

[Thu May  9 19:50:15 2013] Updating counts from extracted products
[Thu May  9 19:50:15 2013] Set source signif. to 333.33/17.14 = 19.45
[Thu May  9 19:50:22 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  9 19:50:22 2013] Using photon index=1.80, rate=0.0111, arf fullrun_pn_xmm0105860101_pi300-10000_pass1_cl_src35.arf
[Thu May  9 19:50:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  9 19:50:22 2013] Updating source flux to 3.7e-14
[Thu May  9 19:50:42 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May  9 19:50:46 2013] xmm0105860101/analysis//spectral/fullrun_pn_xmm0105860101_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete