[Thu May 9 06:41:14 2013] Detection parameters: Position = (298.4, 261.6) = 13 20 12.55 33 7 40.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 193.3 +/- 19.8 Background counts = 55.8 Rate = 0.009 +/- 0.0009 [Thu May 9 06:41:15 2013] Off-axis axis estimate = 2.67' [Thu May 9 06:43:56 2013] Using EEF radius (= 7.76 ")to estimate initial spatial extent for simple fitting [Thu May 9 06:43:56 2013] Initial guess for spatial extent in simple fitting = 7.76" [Thu May 9 06:43:56 2013] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.198 [Thu May 9 06:43:56 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 7.76" [Thu May 9 09:31:29 2013] fullrun_pn_xmm0105860101_pi300-10000_cl_pass0_src28.ximg exists [Thu May 9 09:31:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105860101_pi300-10000_cl_pass0_src28.csv [Thu May 9 09:31:29 2013] fullrun_pn_xmm0105860101_pi300-10000_cl_pass0_src28_1.ximg exists [Thu May 9 09:31:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105860101_pi300-10000_cl_pass0_src28.csv [Thu May 9 09:31:29 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0105860101_pi300-10000_cl_pass0_src28_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0105860101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 9 09:31:30 2013] fullrun_pn_xmm0105860101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists [Thu May 9 09:31:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105860101_pi300-10000_cl_pass0_tfrozen_src28.csv [Thu May 9 09:31:30 2013] fullrun_pn_xmm0105860101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists [Thu May 9 09:31:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105860101_pi300-10000_cl_pass0_tfrozen_src28.csv [Thu May 9 09:31:30 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0105860101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0105860101_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 9 12:27:06 2013] Source 29 is offset by 6.302555 and -7.493010 pixels which is larger than 2 X fitted extent = 7.137747 x 3.556207, not incorporating fit results [Thu May 9 12:27:06 2013] Warning: source 76 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 10.448000 pixels away [Thu May 9 12:27:06 2013] Spatial fit model total counts = 1653.970000, observed total counts = 926.000000 [Thu May 9 12:27:06 2013] Poor agreement between spatial fit and data for source 29 It may help to tweak spatial fit manually Not incorporating fit results [Thu May 9 12:27:06 2013] Source 29 is offset by 0.029796 and 2.362438 pixels which is larger than 2 X fitted extent = 0.960630 x 0.960630, not incorporating fit results [Thu May 9 12:27:06 2013] Vigneting correction estimate = 1.000000 [Thu May 9 12:27:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 9 12:27:06 2013] Assessing source extent using major [Thu May 9 12:27:06 2013] Source does appear to be extended [Thu May 9 12:27:06 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 9 12:27:06 2013] Source is confused with source 78 [Thu May 9 12:27:35 2013] Using EEF radius (= 7.76 ")to estimate initial spatial extent for simple fitting [Thu May 9 12:27:35 2013] Initial guess for spatial extent in simple fitting = 7.76" [Thu May 9 12:27:35 2013] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.198 [Thu May 9 12:27:35 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 7.76" [Thu May 9 14:34:59 2013] fullrun_pn_xmm0105860101_pi300-10000_cl_pass1_src28.ximg exists [Thu May 9 14:34:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105860101_pi300-10000_cl_pass1_src28.csv [Thu May 9 14:34:59 2013] fullrun_pn_xmm0105860101_pi300-10000_cl_pass1_src28_1.ximg exists [Thu May 9 14:34:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105860101_pi300-10000_cl_pass1_src28.csv [Thu May 9 14:34:59 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0105860101_pi300-10000_cl_pass1_src28_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0105860101_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 9 14:35:00 2013] fullrun_pn_xmm0105860101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists [Thu May 9 14:35:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105860101_pi300-10000_cl_pass1_tfrozen_src28.csv [Thu May 9 14:35:00 2013] fullrun_pn_xmm0105860101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists [Thu May 9 14:35:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105860101_pi300-10000_cl_pass1_tfrozen_src28.csv [Thu May 9 14:35:00 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0105860101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0105860101_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 9 17:05:15 2013] Source 29 is offset by 6.168509 and -7.493010 pixels which is larger than 2 X fitted extent = 7.137747 x 3.552529, not incorporating fit results [Thu May 9 17:05:15 2013] Vigneting correction estimate = 1.000000 [Thu May 9 17:05:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 9 17:05:15 2013] Assessing source extent using major [Thu May 9 17:05:15 2013] Source does appear to be extended [Thu May 9 17:05:15 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 9 17:05:43 2013] XMMSAS src. selection expression = ellipse(25912.116272, 22714.590149, 652.500000, 652.500000, 0.000000, X, Y) [Thu May 9 17:05:43 2013] Writing source region out to fullrun_pn_xmm0105860101_pi300-10000_pass1_cl_src29_src.reg [Thu May 9 17:05:43 2013] Extracting stamp from image fullrun_pn_xmm0105860101_pi300-10000_cl_sm2.00.img.gz, (261, 224) - (336, 299) [Thu May 9 17:05:43 2013] XMMSAS bgd. selection expression = annulus(25912.116272, 22714.590149, 1087.500000, 2175.000000, X, Y) && !ellipse(25413.304200, 23841.579000, 1146.936033, 1053.824030, 101.008900, X, Y) && !ellipse(26883.842200, 24936.640000, 499.132814, 499.132814, 0.000000, X, Y) && !ellipse(24050.165466, 22756.903351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24644.849280, 21528.889800, 506.393615, 506.393615, 0.000000, X, Y) && !ellipse(26851.595734, 19956.366501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24919.464539, 25602.492065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23733.757660, 25059.902313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27138.601746, 24087.319946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27471.754822, 23174.260681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27032.835999, 23144.866852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26486.399109, 22914.667847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25093.557465, 22359.519806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26407.008423, 21771.937927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25493.107513, 21289.934616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25773.229034, 20281.542542, 870.000000, 870.000000, 0.000000, X, Y) [Thu May 9 17:05:43 2013] Writing fullrun_pn_xmm0105860101_pi300-10000_pass1_cl_src29.gif [Thu May 9 17:18:22 2013] Mean detx,y = (62.24, -1461.64) [Thu May 9 17:18:24 2013] Setting backscal keywords in source and bgd. spectrum [Thu May 9 17:18:34 2013] Binned source spectrum to 10 counts/bin [Thu May 9 17:18:34 2013] Setting source spectrum file to fullrun_pn_xmm0105860101_pi300-10000_pass1_cl_src29_src_b10.pi.gz [Thu May 9 17:18:34 2013] Setting bgd. spectrum file to fullrun_pn_xmm0105860101_pi300-10000_pass1_cl_src29_bgd.pi.gz [Thu May 9 17:58:04 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Thu May 9 17:58:04 2013] rmf not generated due to insufficient counts [Thu May 9 19:50:14 2013] Updating aperture counts using extracted products [Thu May 9 19:50:14 2013] Total counts from fullrun_pn_xmm0105860101_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 820.00 [Thu May 9 19:50:14 2013] Total counts from fullrun_pn_xmm0105860101_pi300-10000_pass1_cl_src29_bgd.pi.gz = 715.00 [Thu May 9 19:50:14 2013] Got source and background scale factors 930577.000000, 1292800.000000 [Thu May 9 19:50:14 2013] User source parameters: Position = (298.4, 261.6) = 13 20 12.55 33 7 40.8 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 305.3 +/- 29.6 Background aperture counts = 514.7 Rate = 0.01 +/- 0.001 [Thu May 9 19:50:14 2013] Updating counts from extracted products [Thu May 9 19:50:14 2013] Set source signif. to 305.33/22.69 = 13.46 [Thu May 9 19:50:22 2013] Calculating source flux in energy range 0.30-8.00 [Thu May 9 19:50:22 2013] Using photon index=1.80, rate=0.0102, arf fullrun_pn_xmm0105860101_pi300-10000_pass1_cl_src29.arf [Thu May 9 19:50:22 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu May 9 19:50:22 2013] Updating source flux to 2.8e-14 [Thu May 9 19:50:42 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Thu May 9 19:50:46 2013] xmm0105860101/analysis//spectral/fullrun_pn_xmm0105860101_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete