[Thu May  9 06:42:17 2013] Detection parameters:
  Position = (417.0, 406.1) = 13 19 31.39 33 18 14.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.3 +/- 7.5
  Background counts = 6.5
  Rate = 0.001 +/- 0.0002

[Thu May  9 06:42:18 2013] Off-axis axis estimate = 11.61'
[Thu May  9 10:57:15 2013] Using EEF radius (= 12.24 ")to estimate initial spatial extent for simple fitting
[Thu May  9 10:57:15 2013] Initial guess for spatial extent in simple fitting = 12.24"
[Thu May  9 10:57:15 2013] source mask rpix=2.8, npix_max = 43, mask sum = 31, frac = 0.706
[Thu May  9 10:57:15 2013] Giving source the simple spatial ID 61 for pass 0, mean size = 12.24"
[Thu May  9 12:26:52 2013] fullrun_mos2_xmm0105860101_pi300-10000_cl_pass0_src61.ximg exists
[Thu May  9 12:26:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105860101_pi300-10000_cl_pass0_src61.csv
[Thu May  9 12:26:52 2013] fullrun_mos2_xmm0105860101_pi300-10000_cl_pass0_src61_1.ximg exists
[Thu May  9 12:26:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105860101_pi300-10000_cl_pass0_src61.csv
[Thu May  9 12:26:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105860101_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105860101_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 12:26:52 2013] fullrun_mos2_xmm0105860101_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Thu May  9 12:26:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105860101_pi300-10000_cl_pass0_tfrozen_src61.csv
[Thu May  9 12:26:52 2013] fullrun_mos2_xmm0105860101_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Thu May  9 12:26:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105860101_pi300-10000_cl_pass0_tfrozen_src61.csv
[Thu May  9 12:26:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105860101_pi300-10000_cl_pass0_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105860101_pi300-10000_cl_pass0_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 12:27:20 2013] Warning, spatial fit 61 centroid is now closest to src. 17
[Thu May  9 12:27:20 2013] Vigneting correction estimate = 1.000000
[Thu May  9 12:27:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 12:27:20 2013] Assessing source extent using major
[Thu May  9 12:27:20 2013] Source does appear to be extended
[Thu May  9 12:27:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 15:51:22 2013] Using EEF radius (= 12.24 ")to estimate initial spatial extent for simple fitting
[Thu May  9 15:51:22 2013] Initial guess for spatial extent in simple fitting = 12.24"
[Thu May  9 15:51:22 2013] source mask rpix=2.8, npix_max = 43, mask sum = 31, frac = 0.706
[Thu May  9 15:51:22 2013] Giving source the simple spatial ID 53 for pass 1, mean size = 12.24"
[Thu May  9 17:05:03 2013] fullrun_mos2_xmm0105860101_pi300-10000_cl_pass1_src53.ximg exists
[Thu May  9 17:05:03 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0105860101_pi300-10000_cl_pass1_src53.csv
[Thu May  9 17:05:03 2013] fullrun_mos2_xmm0105860101_pi300-10000_cl_pass1_src53_1.ximg exists
[Thu May  9 17:05:03 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0105860101_pi300-10000_cl_pass1_src53.csv
[Thu May  9 17:05:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105860101_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105860101_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 17:05:03 2013] fullrun_mos2_xmm0105860101_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Thu May  9 17:05:03 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0105860101_pi300-10000_cl_pass1_tfrozen_src53.csv
[Thu May  9 17:05:03 2013] fullrun_mos2_xmm0105860101_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Thu May  9 17:05:03 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0105860101_pi300-10000_cl_pass1_tfrozen_src53.csv
[Thu May  9 17:05:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105860101_pi300-10000_cl_pass1_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105860101_pi300-10000_cl_pass1_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 17:05:28 2013] Warning: source 53 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 16.036626 pixels away
[Thu May  9 17:05:28 2013] Vigneting correction estimate = 1.000000
[Thu May  9 17:05:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 17:05:28 2013] Assessing source extent using major
[Thu May  9 17:05:28 2013] Source does appear to be extended
[Thu May  9 17:05:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 19:00:45 2013] XMMSAS src. selection expression = ellipse(36232.122223, 35285.800751, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May  9 19:00:45 2013] Writing source region out to fullrun_mos2_xmm0105860101_pi300-10000_pass1_cl_src13_src.reg
[Thu May  9 19:00:45 2013] Extracting stamp from image fullrun_mos2_xmm0105860101_pi300-10000_cl_sm2.00.img.gz, (380, 369) - (455, 444)
[Thu May  9 19:00:45 2013] XMMSAS bgd. selection expression = annulus(36232.122223, 35285.800751, 1087.500000, 2175.000000, X, Y) && !ellipse(36650.682281, 33155.065399, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  9 19:00:45 2013] Writing fullrun_mos2_xmm0105860101_pi300-10000_pass1_cl_src13.gif
[Thu May  9 19:12:05 2013] Mean detx,y = (14198.23, -6598.58) 
[Thu May  9 19:12:06 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  9 19:12:20 2013] Binned source spectrum to 10 counts/bin
[Thu May  9 19:12:20 2013] Setting source spectrum file to fullrun_mos2_xmm0105860101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu May  9 19:12:20 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0105860101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Thu May  9 19:46:07 2013] Not generating rmf since there are only 37 counts
[Thu May  9 19:46:07 2013] rmf not generated due to insufficient counts
[Thu May  9 19:50:32 2013] Updating aperture counts using extracted products
[Thu May  9 19:50:32 2013] Total counts from fullrun_mos2_xmm0105860101_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 60.00
[Thu May  9 19:50:32 2013] Total counts from fullrun_mos2_xmm0105860101_pi300-10000_pass1_cl_src13_bgd.pi.gz = 212.00
[Thu May  9 19:50:32 2013] Got source and background scale factors 833812.000000, 5206719.000000
[Thu May  9 19:50:32 2013] User source parameters:
  Position = (417.0, 406.1) = 13 19 31.39 33 18 14.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 26.0 +/- 8.8
  Background aperture counts = 34.0
  Rate = 0.0008 +/- 0.0003

[Thu May  9 19:50:32 2013] Updating counts from extracted products
[Thu May  9 19:50:32 2013] Set source signif. to 26.05/5.83 = 4.47
[Thu May  9 19:50:33 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  9 19:50:33 2013] Using photon index=1.80, rate=0.000783, arf fullrun_mos2_xmm0105860101_pi300-10000_pass1_cl_src13.arf
[Thu May  9 19:50:33 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  9 19:50:33 2013] Updating source flux to 2.7e-14
[Thu May  9 19:50:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May  9 19:50:42 2013] xmm0105860101/analysis//spectral/fullrun_mos2_xmm0105860101_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete