[Thu May  9 06:41:48 2013] Detection parameters:
  Position = (305.0, 269.1) = 13 20 10.27 33 8 9.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.7 +/- 11.8
  Background counts = 21.4
  Rate = 0.002 +/- 0.0004

[Thu May  9 06:41:49 2013] Off-axis axis estimate = 2.18'
[Thu May  9 09:31:32 2013] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Thu May  9 09:31:32 2013] Initial guess for spatial extent in simple fitting = 7.52"
[Thu May  9 09:31:32 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.806
[Thu May  9 09:31:32 2013] Giving source the simple spatial ID 41 for pass 0, mean size = 7.52"
[Thu May  9 10:57:14 2013] fullrun_mos1_xmm0105860101_pi300-10000_cl_pass0_src41.ximg exists
[Thu May  9 10:57:14 2013] fullrun_mos1_xmm0105860101_pi300-10000_cl_pass0_src41_1.ximg exists
[Thu May  9 10:57:14 2013] Fit fullrun_mos1_xmm0105860101_pi300-10000_cl_pass0_src41 appears to have run properly
[Thu May  9 10:57:15 2013] fullrun_mos1_xmm0105860101_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Thu May  9 10:57:15 2013] fullrun_mos1_xmm0105860101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Thu May  9 10:57:15 2013] Fit fullrun_mos1_xmm0105860101_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Thu May  9 12:27:12 2013] Warning, spatial fit 41 centroid is now closest to src. 39
[Thu May  9 12:27:12 2013] Spatial fit model total counts = 468.640000, observed total counts = 460.000000
[Thu May  9 12:27:12 2013] Offset between fit and detection position for source 40 = 3.133758 pixels
[Thu May  9 12:27:12 2013] Warning, changing simple spatial fit ID from 41 to 47
[Thu May  9 12:27:12 2013] 458.573700 total counts/ 407.164000 bgd. counts: snr = 2.547771
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 3.133758 pixels
  Position = (303.0, 271.5) = 13 20 10.97 33 8 21.2
  Extent = 15.3 (15.3-30.6)", rotation angle = 0
  Source counts = 51.4 +/- 21.4
  Background counts = 407.2
  Rate = 0.002 +/- 0.0006
[Thu May  9 12:27:12 2013] Vigneting correction estimate = 1.000000
[Thu May  9 12:27:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 12:27:12 2013] Assessing source extent using major axis lower bound
[Thu May  9 12:27:12 2013] Source does appear to be extended
[Thu May  9 12:27:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 12:27:12 2013] Source is confused with source 37
[Thu May  9 14:35:01 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  9 14:35:01 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  9 14:35:01 2013] Initial guess for spatial extent in simple fitting = 15.31"
[Thu May  9 14:35:01 2013] source mask rpix=3.5, npix_max = 64, mask sum = 72, frac = 1.114
[Thu May  9 14:35:01 2013] Giving source the simple spatial ID 38 for pass 1, mean size = 15.31"
[Thu May  9 15:51:21 2013] fullrun_mos1_xmm0105860101_pi300-10000_cl_pass1_src38.ximg exists
[Thu May  9 15:51:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105860101_pi300-10000_cl_pass1_src38.csv
[Thu May  9 15:51:21 2013] fullrun_mos1_xmm0105860101_pi300-10000_cl_pass1_src38_1.ximg exists
[Thu May  9 15:51:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105860101_pi300-10000_cl_pass1_src38.csv
[Thu May  9 15:51:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105860101_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105860101_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 15:51:22 2013] fullrun_mos1_xmm0105860101_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Thu May  9 15:51:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105860101_pi300-10000_cl_pass1_tfrozen_src38.csv
[Thu May  9 15:51:22 2013] fullrun_mos1_xmm0105860101_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Thu May  9 15:51:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105860101_pi300-10000_cl_pass1_tfrozen_src38.csv
[Thu May  9 15:51:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105860101_pi300-10000_cl_pass1_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105860101_pi300-10000_cl_pass1_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 17:05:21 2013] Source 40 is offset by 2.582483 and -5.181333 pixels which is larger than
2 X fitted extent = 6.623540 x 2.284901, not incorporating fit results
[Thu May  9 17:05:21 2013] Warning, spatial fit 38 centroid is now closest to src. 41
[Thu May  9 17:05:21 2013] Spatial fit model total counts = 469.553000, observed total counts = 460.000000
[Thu May  9 17:05:21 2013] Offset between fit and detection position for source 40 = 0.120667 pixels
[Thu May  9 17:05:21 2013] Warning, changing simple spatial fit ID from 38 to 42
[Thu May  9 17:05:21 2013] 461.471800 total counts/ 415.195000 bgd. counts: snr = 2.271105
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.120667 pixels
  Position = (303.0, 271.6) = 13 20 10.97 33 8 21.8
  Extent = 15.3 (15.3-30.6)", rotation angle = 0
  Source counts = 46.3 +/- 21.5
  Background counts = 415.2
  Rate = 0.001 +/- 0.0006
[Thu May  9 17:05:21 2013] Vigneting correction estimate = 1.000000
[Thu May  9 17:05:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 17:05:21 2013] Assessing source extent using major axis lower bound
[Thu May  9 17:05:21 2013] Source does appear to be extended
[Thu May  9 17:05:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 18:16:42 2013] XMMSAS src. selection expression = ellipse(26308.928000, 23582.560000, 918.858026, 918.858026, 0.000000, X, Y)
[Thu May  9 18:16:42 2013] Writing source region out to fullrun_mos1_xmm0105860101_pi300-10000_pass1_cl_src40_src.reg
[Thu May  9 18:16:42 2013] Extracting stamp from image fullrun_mos1_xmm0105860101_pi300-10000_cl_sm2.00.img.gz, (250, 219) - (356, 324)
[Thu May  9 18:16:42 2013] XMMSAS bgd. selection expression = annulus(26308.928000, 23582.560000, 1531.430044, 3062.860088, X, Y) && !ellipse(25409.153400, 23868.110400, 1060.896031, 915.504026, 103.108500, X, Y) && !ellipse(24680.844400, 21545.149200, 506.450415, 506.450415, 0.000000, X, Y) && !ellipse(26239.332703, 24833.566376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26857.954529, 19851.281769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23730.285600, 26064.256800, 351.404010, 351.404010, 0.000000, X, Y) && !ellipse(24811.230000, 24841.532000, 2245.936065, 2245.936065, 0.000000, X, Y) && !ellipse(26681.113647, 24221.629913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26346.110016, 25724.312775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26537.481873, 23793.169250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26913.675629, 23141.027679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24490.172852, 22587.387695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24109.898000, 25916.984000, 1122.968032, 1122.968032, 0.000000, X, Y)
[Thu May  9 18:16:42 2013] Writing fullrun_mos1_xmm0105860101_pi300-10000_pass1_cl_src40.gif
[Thu May  9 18:25:57 2013] Mean detx,y = (661.33, -580.49) 
[Thu May  9 18:25:58 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  9 18:26:04 2013] Binned source spectrum to 10 counts/bin
[Thu May  9 18:26:04 2013] Setting source spectrum file to fullrun_mos1_xmm0105860101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Thu May  9 18:26:04 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0105860101_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Thu May  9 18:57:04 2013] Not generating rmf since there are only 46 counts
[Thu May  9 18:57:04 2013] rmf not generated due to insufficient counts
[Thu May  9 19:50:25 2013] Updating aperture counts using extracted products
[Thu May  9 19:50:25 2013] Total counts from fullrun_mos1_xmm0105860101_pi300-10000_pass1_cl_src40_src_b10.pi.gz = 1836.00
[Thu May  9 19:50:26 2013] Total counts from fullrun_mos1_xmm0105860101_pi300-10000_pass1_cl_src40_bgd.pi.gz = 1361.00
[Thu May  9 19:50:26 2013] Got source and background scale factors 2652800.000000, 11731204.000000
[Thu May  9 19:50:26 2013] User source parameters:
  Position = (303.0, 271.6) = 13 20 10.97 33 8 21.8
  Extent = 15.3 (15.3-30.6)", rotation angle = 0
  Source aperture counts = 1528.2 +/- 43.9
  Background aperture counts = 307.8
  Rate = 0.05 +/- 0.001

[Thu May  9 19:50:27 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  9 19:50:27 2013] Using photon index=1.80, rate=0.00139, arf fullrun_mos1_xmm0105860101_pi300-10000_pass1_cl_src40.arf
[Thu May  9 19:50:27 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  9 19:50:27 2013] Updating source flux to 1.3e-14
[Thu May  9 19:50:35 2013] Flag b found in src. 40 procflags, skipping spectral fitting
[Thu May  9 19:50:35 2013] Flag c found in src. 40 procflags, skipping spectral fitting
[Thu May  9 19:50:35 2013] Source 40 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May  9 19:50:38 2013] xmm0105860101/analysis//spectral/fullrun_mos1_xmm0105860101_pi300-10000_pass1_cl_src40_pl.csv not found, spectral fit skipped or did not complete