[Mon Aug 27 10:16:04 2012] Detection parameters:
  Position = (308.2, 452.9) = 17 8 55.72 -43 56 21.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 108.0 +/- 15.6
  Background counts = 31.7
  Rate = 0.01 +/- 0.002

[Mon Aug 27 10:16:05 2012] Off-axis axis estimate = 11.22'
[Mon Aug 27 11:27:20 2012] Using EEF radius (= 12.04 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 11:27:20 2012] Initial guess for spatial extent in simple fitting = 12.04"
[Mon Aug 27 11:27:20 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.843
[Mon Aug 27 11:27:20 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 12.04"
[Mon Aug 27 12:58:26 2012] fullrun_mos2_xmm0105470501_pi300-10000_cl_pass0_src17.ximg exists
[Mon Aug 27 12:58:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105470501_pi300-10000_cl_pass0_src17.csv
[Mon Aug 27 12:58:26 2012] fullrun_mos2_xmm0105470501_pi300-10000_cl_pass0_src17_1.ximg exists
[Mon Aug 27 12:58:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105470501_pi300-10000_cl_pass0_src17.csv
[Mon Aug 27 12:58:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105470501_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105470501_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 12:58:27 2012] fullrun_mos2_xmm0105470501_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Mon Aug 27 12:58:27 2012] fullrun_mos2_xmm0105470501_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Aug 27 12:58:27 2012] Fit fullrun_mos2_xmm0105470501_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Mon Aug 27 12:58:39 2012] Spatial fit model total counts = 628.770000, observed total counts = 618.000000
[Mon Aug 27 12:58:39 2012] Offset between fit and detection position for source 9 = 0.872890 pixels
[Mon Aug 27 12:58:39 2012] Warning, changing simple spatial fit ID from 17 to 10
[Mon Aug 27 12:58:39 2012] 506.332200 total counts/ 491.621000 bgd. counts: snr = 0.663488
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.872890 pixels
  Position = (307.5, 452.3) = 17 8 55.98 -43 56 20.3
  Extent = 4.6 (3.1-10.4)", rotation angle = 0
  Source counts = 14.7 +/- 22.5
  Background counts = 491.6
  Rate = 0.002 +/- 0.003
  Deleting source due to low Poisson probability