[Mon Aug 27 10:16:05 2012] Detection parameters:
  Position = (396.7, 306.0) = 17 8 19.95 -44 6 56.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.5 +/- 16.4
  Background counts = 72.5
  Rate = 0.01 +/- 0.003

[Mon Aug 27 10:16:05 2012] Off-axis axis estimate = 7.14'
[Mon Aug 27 11:27:20 2012] Using EEF radius (= 10.00 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 11:27:20 2012] Initial guess for spatial extent in simple fitting = 10.00"
[Mon Aug 27 11:27:20 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.957
[Mon Aug 27 11:27:20 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 10.00"
[Mon Aug 27 12:58:26 2012] fullrun_mos2_xmm0105470501_pi300-10000_cl_pass0_src19.ximg exists
[Mon Aug 27 12:58:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105470501_pi300-10000_cl_pass0_src19.csv
[Mon Aug 27 12:58:26 2012] fullrun_mos2_xmm0105470501_pi300-10000_cl_pass0_src19_1.ximg exists
[Mon Aug 27 12:58:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105470501_pi300-10000_cl_pass0_src19.csv
[Mon Aug 27 12:58:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105470501_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105470501_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 12:58:27 2012] fullrun_mos2_xmm0105470501_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Mon Aug 27 12:58:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105470501_pi300-10000_cl_pass0_tfrozen_src19.csv
[Mon Aug 27 12:58:27 2012] fullrun_mos2_xmm0105470501_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Mon Aug 27 12:58:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105470501_pi300-10000_cl_pass0_tfrozen_src19.csv
[Mon Aug 27 12:58:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105470501_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105470501_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 12:58:39 2012] Warning, spatial fit 19 centroid is now closest to src. 31
[Mon Aug 27 12:58:39 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 12:58:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 12:58:39 2012] Assessing source extent using major
[Mon Aug 27 12:58:39 2012] Source does appear to be extended
[Mon Aug 27 12:58:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 12:58:39 2012] Source is confused with source 27
[Mon Aug 27 14:20:05 2012] Using EEF radius (= 10.00 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 14:20:05 2012] Initial guess for spatial extent in simple fitting = 10.00"
[Mon Aug 27 14:20:05 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.957
[Mon Aug 27 14:20:05 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 10.00"
[Mon Aug 27 15:35:34 2012] fullrun_mos2_xmm0105470501_pi300-10000_cl_pass1_src17.ximg exists
[Mon Aug 27 15:35:34 2012] fullrun_mos2_xmm0105470501_pi300-10000_cl_pass1_src17_1.ximg exists
[Mon Aug 27 15:35:34 2012] Fit fullrun_mos2_xmm0105470501_pi300-10000_cl_pass1_src17 appears to have run properly
[Mon Aug 27 15:35:35 2012] fullrun_mos2_xmm0105470501_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Mon Aug 27 15:35:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105470501_pi300-10000_cl_pass1_tfrozen_src17.csv
[Mon Aug 27 15:35:35 2012] fullrun_mos2_xmm0105470501_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Mon Aug 27 15:35:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105470501_pi300-10000_cl_pass1_tfrozen_src17.csv
[Mon Aug 27 15:35:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105470501_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105470501_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 15:35:47 2012] Warning, spatial fit 17 centroid is now closest to src. 28
[Mon Aug 27 15:35:47 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 15:35:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 15:35:47 2012] Assessing source extent using major
[Mon Aug 27 15:35:47 2012] Source does appear to be extended
[Mon Aug 27 15:35:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 15:50:55 2012] XMMSAS src. selection expression = ellipse(34463.272675, 26573.643372, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Aug 27 15:50:55 2012] Writing source region out to fullrun_mos2_xmm0105470501_pi300-10000_pass1_cl_src30_src.reg
[Mon Aug 27 15:50:55 2012] Extracting stamp from image fullrun_mos2_xmm0105470501_pi300-10000_cl_sm2.00.img.gz, (359, 269) - (434, 344)
[Mon Aug 27 15:50:55 2012] XMMSAS bgd. selection expression = annulus(34463.272675, 26573.643372, 1087.500000, 2175.000000, X, Y) && !ellipse(33870.003723, 28646.313232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33870.532074, 29157.544434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33918.282776, 25481.268738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34080.502411, 27890.452942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34981.757416, 28847.742340, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 27 15:50:55 2012] Writing fullrun_mos2_xmm0105470501_pi300-10000_pass1_cl_src30.gif
[Mon Aug 27 15:55:41 2012] Mean detx,y = (-7333.39, -1066.07) 
[Mon Aug 27 15:55:42 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 27 15:55:49 2012] grppha failed
[Mon Aug 27 15:55:49 2012] Setting source spectrum file to fullrun_mos2_xmm0105470501_pi300-10000_pass1_cl_src30_src.pi.gz
[Mon Aug 27 15:55:49 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0105470501_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Mon Aug 27 15:58:40 2012] Not generating rmf since there are only 80 counts
[Mon Aug 27 15:58:40 2012] rmf not generated due to insufficient counts
[Mon Aug 27 15:59:04 2012] Updating aperture counts using extracted products
[Mon Aug 27 15:59:04 2012] Error reading totcts from fullrun_mos2_xmm0105470501_pi300-10000_pass1_cl_src30_src.pi.gz
[Mon Aug 27 15:59:04 2012] No arf file for this source, not re-computing flux
[Mon Aug 27 15:59:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Aug 27 15:59:07 2012] xmm0105470501/analysis//spectral/fullrun_mos2_xmm0105470501_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete