[Mon Aug 27 10:15:34 2012] Detection parameters:
  Position = (310.5, 399.9) = 17 8 54.78 -44 0 6.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 110.3 +/- 19.0
  Background counts = 97.3
  Rate = 0.02 +/- 0.003

[Mon Aug 27 10:15:34 2012] Off-axis axis estimate = 7.41'
[Mon Aug 27 10:27:41 2012] Using EEF radius (= 10.13 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 10:27:41 2012] Initial guess for spatial extent in simple fitting = 10.13"
[Mon Aug 27 10:27:41 2012] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.937
[Mon Aug 27 10:27:41 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 10.13"
[Mon Aug 27 11:27:20 2012] fullrun_mos1_xmm0105470501_pi300-10000_cl_pass0_src4.ximg exists
[Mon Aug 27 11:27:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105470501_pi300-10000_cl_pass0_src4.csv
[Mon Aug 27 11:27:20 2012] fullrun_mos1_xmm0105470501_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon Aug 27 11:27:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105470501_pi300-10000_cl_pass0_src4.csv
[Mon Aug 27 11:27:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105470501_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105470501_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 11:27:20 2012] fullrun_mos1_xmm0105470501_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon Aug 27 11:27:20 2012] fullrun_mos1_xmm0105470501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon Aug 27 11:27:20 2012] Fit fullrun_mos1_xmm0105470501_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Mon Aug 27 12:58:33 2012] Spatial fit model total counts = 2437.250000, observed total counts = 1442.000000
[Mon Aug 27 12:58:33 2012] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Aug 27 12:58:33 2012] Warning, spatial fit 4 centroid is now closest to src. 1
[Mon Aug 27 12:58:33 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 12:58:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 12:58:33 2012] Assessing source extent using major
[Mon Aug 27 12:58:33 2012] Source does appear to be extended
[Mon Aug 27 12:58:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 12:58:33 2012] Source is confused with source 1
[Mon Aug 27 13:05:00 2012] Using EEF radius (= 10.13 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 13:05:00 2012] Initial guess for spatial extent in simple fitting = 10.13"
[Mon Aug 27 13:05:00 2012] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.937
[Mon Aug 27 13:05:00 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 10.13"
[Mon Aug 27 14:20:04 2012] fullrun_mos1_xmm0105470501_pi300-10000_cl_pass1_src4.ximg exists
[Mon Aug 27 14:20:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105470501_pi300-10000_cl_pass1_src4.csv
[Mon Aug 27 14:20:04 2012] fullrun_mos1_xmm0105470501_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon Aug 27 14:20:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105470501_pi300-10000_cl_pass1_src4.csv
[Mon Aug 27 14:20:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105470501_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105470501_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 14:20:04 2012] fullrun_mos1_xmm0105470501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon Aug 27 14:20:04 2012] fullrun_mos1_xmm0105470501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon Aug 27 14:20:04 2012] Fit fullrun_mos1_xmm0105470501_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Mon Aug 27 15:35:42 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 13.266608 pixels away
[Mon Aug 27 15:35:42 2012] Source 11 is offset by -5.679868 and -6.654509 pixels which is larger than
2 X fitted extent = 1.903756 x 1.903756, not incorporating fit results
[Mon Aug 27 15:35:42 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 15:35:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 15:35:42 2012] Assessing source extent using major
[Mon Aug 27 15:35:42 2012] Source does appear to be extended
[Mon Aug 27 15:35:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 15:44:58 2012] XMMSAS src. selection expression = ellipse(26964.365448, 34739.387756, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Aug 27 15:44:58 2012] Writing source region out to fullrun_mos1_xmm0105470501_pi300-10000_pass1_cl_src11_src.reg
[Mon Aug 27 15:44:58 2012] Extracting stamp from image fullrun_mos1_xmm0105470501_pi300-10000_cl_sm2.00.img.gz, (273, 362) - (348, 437)
[Mon Aug 27 15:44:58 2012] XMMSAS bgd. selection expression = annulus(26964.365448, 34739.387756, 1087.500000, 2175.000000, X, Y) && !ellipse(26887.566600, 34262.606000, 1616.608047, 1616.608047, 0.000000, X, Y) && !ellipse(26178.614838, 34338.388062, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 27 15:44:58 2012] Writing fullrun_mos1_xmm0105470501_pi300-10000_pass1_cl_src11.gif
[Mon Aug 27 15:46:08 2012] Mean detx,y = (7351.99, -171.81) 
[Mon Aug 27 15:46:09 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 27 15:46:19 2012] grppha failed
[Mon Aug 27 15:46:19 2012] Setting source spectrum file to fullrun_mos1_xmm0105470501_pi300-10000_pass1_cl_src11_src.pi.gz
[Mon Aug 27 15:46:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0105470501_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Mon Aug 27 15:50:52 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Aug 27 15:50:52 2012] rmf not generated due to insufficient counts
[Mon Aug 27 15:59:04 2012] Updating aperture counts using extracted products
[Mon Aug 27 15:59:04 2012] Error reading totcts from fullrun_mos1_xmm0105470501_pi300-10000_pass1_cl_src11_src.pi.gz
[Mon Aug 27 15:59:04 2012] No arf file for this source, not re-computing flux
[Mon Aug 27 15:59:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Aug 27 15:59:06 2012] xmm0105470501/analysis//spectral/fullrun_mos1_xmm0105470501_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete