[Fri Jun 29 10:51:16 2012] Detection parameters:
  Position = (304.9, 476.0) = 16 40 57.99 -53 33 40.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.2 +/- 16.2
  Background counts = 29.7
  Rate = 0.006 +/- 0.0008

[Fri Jun 29 10:51:18 2012] Off-axis axis estimate = 12.88'
[Fri Jun 29 13:54:23 2012] Using EEF radius (= 12.87 ")to estimate initial spatial extent for simple fitting
[Fri Jun 29 13:54:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 29 13:54:23 2012] Initial guess for spatial extent in simple fitting = 12.87"
[Fri Jun 29 13:54:23 2012] source mask rpix=3.0, npix_max = 47, mask sum = 42, frac = 0.878
[Fri Jun 29 13:54:23 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 12.87"
[Fri Jun 29 16:03:32 2012] fullrun_mos1_xmm0105470401_pi300-10000_cl_pass0_src27.ximg exists
[Fri Jun 29 16:03:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105470401_pi300-10000_cl_pass0_src27.csv
[Fri Jun 29 16:03:32 2012] fullrun_mos1_xmm0105470401_pi300-10000_cl_pass0_src27_1.ximg exists
[Fri Jun 29 16:03:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105470401_pi300-10000_cl_pass0_src27.csv
[Fri Jun 29 16:03:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105470401_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105470401_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 29 16:03:33 2012] fullrun_mos1_xmm0105470401_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Fri Jun 29 16:03:33 2012] fullrun_mos1_xmm0105470401_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Fri Jun 29 16:03:33 2012] Fit fullrun_mos1_xmm0105470401_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Fri Jun 29 17:28:48 2012] Warning, spatial fit 27 centroid is now closest to src. 5
[Fri Jun 29 17:28:48 2012] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 13.675043 pixels away
[Fri Jun 29 17:28:48 2012] Vigneting correction estimate = 1.000000
[Fri Jun 29 17:28:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 29 17:28:48 2012] Assessing source extent using major
[Fri Jun 29 17:28:48 2012] Source does appear to be extended
[Fri Jun 29 17:28:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 29 17:28:48 2012] Source is confused with source 5
[Fri Jun 29 18:26:48 2012] Using EEF radius (= 12.87 ")to estimate initial spatial extent for simple fitting
[Fri Jun 29 18:26:48 2012] Initial guess for spatial extent in simple fitting = 12.87"
[Fri Jun 29 18:26:48 2012] source mask rpix=3.0, npix_max = 47, mask sum = 42, frac = 0.878
[Fri Jun 29 18:26:48 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 12.87"
[Fri Jun 29 20:19:25 2012] fullrun_mos1_xmm0105470401_pi300-10000_cl_pass1_src27.ximg exists
[Fri Jun 29 20:19:25 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0105470401_pi300-10000_cl_pass1_src27.csv
[Fri Jun 29 20:19:25 2012] fullrun_mos1_xmm0105470401_pi300-10000_cl_pass1_src27_1.ximg exists
[Fri Jun 29 20:19:25 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0105470401_pi300-10000_cl_pass1_src27.csv
[Fri Jun 29 20:19:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105470401_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105470401_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 29 20:19:26 2012] fullrun_mos1_xmm0105470401_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Fri Jun 29 20:19:26 2012] fullrun_mos1_xmm0105470401_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Fri Jun 29 20:19:26 2012] Fit fullrun_mos1_xmm0105470401_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Fri Jun 29 21:25:33 2012] Warning, spatial fit 27 centroid is now closest to src. 21
[Fri Jun 29 21:25:34 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 12.036229 pixels away
[Fri Jun 29 21:25:34 2012] Spatial fit model total counts = 957.523000, observed total counts = 956.000000
[Fri Jun 29 21:25:34 2012] Offset between fit and detection position for source 18 = 0.519366 pixels
[Fri Jun 29 21:25:34 2012] Warning, changing simple spatial fit ID from 27 to 35
[Fri Jun 29 21:25:34 2012] 631.913900 total counts/ 567.256000 bgd. counts: snr = 2.714764
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.519366 pixels
  Position = (304.7, 476.5) = 16 40 58.12 -53 33 40.1
  Extent = 6.3 (3.9-13.8)", rotation angle = 0
  Source counts = 64.7 +/- 25.1
  Background counts = 567.3
  Rate = 0.003 +/- 0.001
[Fri Jun 29 21:25:34 2012] Vigneting correction estimate = 1.000000
[Fri Jun 29 21:25:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 29 21:25:34 2012] Assessing source extent using major axis lower bound
[Fri Jun 29 21:25:34 2012] Source does appear to be extended
[Fri Jun 29 21:25:34 2012] Computing asymmetry using major and minor axis, asym = 1.00