[Fri Jun 29 10:51:15 2012] Detection parameters:
  Position = (413.0, 313.1) = 16 40 4.99 -53 45 30.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 525.4 +/- 30.3
  Background counts = 79.1
  Rate = 0.04 +/- 0.002

[Fri Jun 29 10:51:18 2012] Off-axis axis estimate = 8.37'
[Fri Jun 29 13:54:23 2012] Using EEF radius (= 10.61 ")to estimate initial spatial extent for simple fitting
[Fri Jun 29 13:54:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 29 13:54:23 2012] Initial guess for spatial extent in simple fitting = 10.61"
[Fri Jun 29 13:54:23 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.041
[Fri Jun 29 13:54:23 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.61"
[Fri Jun 29 16:03:31 2012] fullrun_mos1_xmm0105470401_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 29 16:03:31 2012] fullrun_mos1_xmm0105470401_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 29 16:03:31 2012] Fit fullrun_mos1_xmm0105470401_pi300-10000_cl_pass0_src1 appears to have run properly
[Fri Jun 29 16:03:32 2012] fullrun_mos1_xmm0105470401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 29 16:03:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105470401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jun 29 16:03:32 2012] fullrun_mos1_xmm0105470401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 29 16:03:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105470401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jun 29 16:03:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105470401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105470401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 29 17:28:48 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.742464 pixels away
[Fri Jun 29 17:28:48 2012] Vigneting correction estimate = 1.000000
[Fri Jun 29 17:28:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 29 17:28:48 2012] Assessing source extent using major
[Fri Jun 29 17:28:48 2012] Source does appear to be extended
[Fri Jun 29 17:28:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 29 18:26:48 2012] Using EEF radius (= 10.61 ")to estimate initial spatial extent for simple fitting
[Fri Jun 29 18:26:48 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 29 18:26:48 2012] Initial guess for spatial extent in simple fitting = 10.61"
[Fri Jun 29 18:26:48 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.041
[Fri Jun 29 18:26:48 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.61"
[Fri Jun 29 20:19:24 2012] fullrun_mos1_xmm0105470401_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 29 20:19:24 2012] fullrun_mos1_xmm0105470401_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 29 20:19:24 2012] Fit fullrun_mos1_xmm0105470401_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Jun 29 20:19:25 2012] fullrun_mos1_xmm0105470401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 29 20:19:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105470401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jun 29 20:19:25 2012] fullrun_mos1_xmm0105470401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 29 20:19:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105470401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jun 29 20:19:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105470401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105470401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 29 21:25:33 2012] Spatial fit model total counts = 1565.700000, observed total counts = 1514.000000
[Fri Jun 29 21:25:33 2012] Offset between fit and detection position for source 1 = 0.258774 pixels
[Fri Jun 29 21:25:33 2012] 1570.739000 total counts/ 1139.040000 bgd. counts: snr = 12.791208
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.258774 pixels
  Position = (412.7, 313.1) = 16 40 5.12 -53 45 30.1
  Extent = 7.5" x 6.1", rotation angle = 92
  Source counts = 431.7 +/- 39.6
  Background counts = 1139.0
  Rate = 0.02 +/- 0.002
[Fri Jun 29 21:25:34 2012] Vigneting correction estimate = 1.000000
[Fri Jun 29 21:25:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 29 21:25:34 2012] Assessing source extent using major
[Fri Jun 29 21:25:34 2012] Source does appear to be extended
[Fri Jun 29 21:25:34 2012] Computing asymmetry using major and minor axis, asym = 1.22