[Tue Nov 29 11:07:30 2011] Detection parameters:
  Position = (282.5, 484.2) = 16 41 7.92 -53 33 10.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 219.3 +/- 20.3
  Background counts = 19.0
  Rate = 0.01 +/- 0.001

[Tue Nov 29 11:07:32 2011] Off-axis axis estimate = 13.52'
[Thu Dec  1 04:50:39 2011] Using EEF radius (= 13.19 ")to estimate initial spatial extent for simple fitting
[Thu Dec  1 04:50:39 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Dec  1 04:50:39 2011] Initial guess for spatial extent in simple fitting = 13.19"
[Thu Dec  1 04:50:39 2011] source mask rpix=3.0, npix_max = 49, mask sum = 48, frac = 0.962
[Thu Dec  1 04:50:39 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 13.19"
[Thu Dec  1 06:20:42 2011] fullrun_mos2_xmm0105470101_pi300-10000_cl_pass0_src10.ximg exists
[Thu Dec  1 06:20:42 2011] fullrun_mos2_xmm0105470101_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu Dec  1 06:20:42 2011] Fit fullrun_mos2_xmm0105470101_pi300-10000_cl_pass0_src10 appears to have run properly
[Thu Dec  1 06:20:42 2011] fullrun_mos2_xmm0105470101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu Dec  1 06:20:42 2011] fullrun_mos2_xmm0105470101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu Dec  1 06:20:42 2011] Fit fullrun_mos2_xmm0105470101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Thu Dec  1 06:20:58 2011] Warning, spatial fit 10 centroid is now closest to src. 9
[Thu Dec  1 06:20:58 2011] Spatial fit model total counts = 862.471000, observed total counts = 861.000000
[Thu Dec  1 06:20:58 2011] Offset between fit and detection position for source 6 = 2.507253 pixels
[Thu Dec  1 06:20:58 2011] Warning, changing simple spatial fit ID from 10 to 13
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 2.507253 pixels
  Position = (281.9, 486.6) = 16 41 8.21 -53 33 2.2
  Extent = 27.1 (27.1-54.2)", rotation angle = 0
  Source counts = 675.6 +/- 26.0
  Background counts = 0.0
  Rate = 0.03 +/- 0.001
 Deleting source due to low signal-to-noise ratio