[Tue Nov 29 11:06:40 2011] Detection parameters:
  Position = (323.0, 221.0) = 16 40 48.03 -53 52 16.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.1 +/- 17.3
  Background counts = 69.0
  Rate = 0.008 +/- 0.001

[Tue Nov 29 11:06:41 2011] Off-axis axis estimate = 5.89'
[Thu Dec  1 02:03:15 2011] Using EEF radius (= 9.37 ")to estimate initial spatial extent for simple fitting
[Thu Dec  1 02:03:15 2011] Initial guess for spatial extent in simple fitting = 9.37"
[Thu Dec  1 02:03:15 2011] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.277
[Thu Dec  1 02:03:15 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 9.37"
[Thu Dec  1 04:50:37 2011] fullrun_mos1_xmm0105470101_pi300-10000_cl_pass0_src21.ximg exists
[Thu Dec  1 04:50:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105470101_pi300-10000_cl_pass0_src21.csv
[Thu Dec  1 04:50:37 2011] fullrun_mos1_xmm0105470101_pi300-10000_cl_pass0_src21_1.ximg exists
[Thu Dec  1 04:50:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105470101_pi300-10000_cl_pass0_src21.csv
[Thu Dec  1 04:50:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105470101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105470101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 04:50:38 2011] fullrun_mos1_xmm0105470101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Thu Dec  1 04:50:38 2011] fullrun_mos1_xmm0105470101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Thu Dec  1 04:50:38 2011] Fit fullrun_mos1_xmm0105470101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Thu Dec  1 06:20:52 2011] Spatial fit model total counts = 1338.950000, observed total counts = 1340.000000
[Thu Dec  1 06:20:52 2011] Offset between fit and detection position for source 42 = 4.201581 pixels
[Thu Dec  1 06:20:52 2011] 1233.144000 total counts/ 806.004000 bgd. counts: snr = 15.045327
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 4.201581 pixels
  Position = (325.8, 217.8) = 16 40 46.68 -53 52 31.5
  Extent = 18.7 (18.7-18.7)", rotation angle = 0
  Source counts = 427.1 +/- 35.1
  Background counts = 806.0
  Rate = 0.02 +/- 0.002
[Thu Dec  1 06:20:52 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 06:20:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 06:20:52 2011] Assessing source extent using major axis lower bound
[Thu Dec  1 06:20:52 2011] Source does appear to be extended
[Thu Dec  1 06:20:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 06:20:52 2011] Source is confused with source 18
[Thu Dec  1 14:37:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Dec  1 14:37:23 2011] Initial guess for spatial extent in simple fitting = 18.73"
[Thu Dec  1 14:37:23 2011] source mask rpix=4.3, npix_max = 92, mask sum = 100, frac = 1.083
[Thu Dec  1 14:37:23 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 18.73"
[Thu Dec  1 17:39:37 2011] fullrun_mos1_xmm0105470101_pi300-10000_cl_pass1_src21.ximg exists
[Thu Dec  1 17:39:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105470101_pi300-10000_cl_pass1_src21.csv
[Thu Dec  1 17:39:37 2011] fullrun_mos1_xmm0105470101_pi300-10000_cl_pass1_src21_1.ximg exists
[Thu Dec  1 17:39:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105470101_pi300-10000_cl_pass1_src21.csv
[Thu Dec  1 17:39:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105470101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105470101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 17:39:38 2011] fullrun_mos1_xmm0105470101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Thu Dec  1 17:39:38 2011] fullrun_mos1_xmm0105470101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Thu Dec  1 17:39:38 2011] Fit fullrun_mos1_xmm0105470101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Thu Dec  1 19:12:05 2011] Warning, spatial fit 21 centroid is now closest to src. 43
[Thu Dec  1 19:12:05 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 19:12:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 19:12:05 2011] Assessing source extent using major axis lower bound
[Thu Dec  1 19:12:05 2011] Source does appear to be extended
[Thu Dec  1 19:12:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 09:57:03 2011] XMMSAS src. selection expression = ellipse(28293.952000, 18900.318000, 1123.770032, 1123.770032, 0.000000, X, Y)
[Sat Dec  3 09:57:03 2011] Writing source region out to fullrun_mos1_xmm0105470101_pi300-10000_pass1_cl_src42_src.reg
[Sat Dec  3 09:57:03 2011] Extracting stamp from image fullrun_mos1_xmm0105470101_pi300-10000_cl_sm2.00.img.gz, (261, 153) - (390, 282)
[Sat Dec  3 09:57:03 2011] XMMSAS bgd. selection expression = annulus(28293.952000, 18900.318000, 1872.950054, 3745.900108, X, Y) && !ellipse(27397.993400, 20640.370600, 1402.712040, 1402.712040, 0.000000, X, Y) && !ellipse(27929.537000, 19693.678400, 502.464814, 502.464814, 0.000000, X, Y) && !ellipse(28255.764800, 18658.180000, 1570.816045, 1570.816045, 0.000000, X, Y) && !ellipse(28513.866600, 16828.936636, 1604.360046, 357.960010, 80.056030, X, Y) && !ellipse(28330.204066, 17779.711743, 1604.360046, 421.956319, 79.686248, X, Y) && !ellipse(28274.449000, 18169.812000, 1105.696032, 1105.696032, 0.000000, X, Y) && !ellipse(28085.485800, 20813.608000, 1435.768041, 1435.768041, 0.000000, X, Y) && !ellipse(28910.227090, 14360.683987, 2594.896075, 465.423829, 79.822241, X, Y) && !ellipse(28131.492432, 20223.670868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28750.584198, 15613.695709, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec  3 09:57:03 2011] Writing fullrun_mos1_xmm0105470101_pi300-10000_pass1_cl_src42.gif
[Sat Dec  3 10:02:01 2011] Mean detx,y = (-8641.10, -172.70) 
[Sat Dec  3 10:02:02 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec  3 10:02:24 2011] Binned source spectrum to 10 counts/bin
[Sat Dec  3 10:02:25 2011] Setting source spectrum file to fullrun_mos1_xmm0105470101_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Sat Dec  3 10:02:25 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0105470101_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Sat Dec  3 12:38:47 2011] Updating aperture counts using extracted products
[Sat Dec  3 12:38:47 2011] Error reading totcts from fullrun_mos1_xmm0105470101_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Sat Dec  3 12:38:48 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec  3 12:38:48 2011] Using photon index=1.80, rate=0.0218, arf fullrun_mos1_xmm0105470101_pi300-10000_pass1_cl_src42.arf
[Sat Dec  3 12:38:48 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec  3 12:38:48 2011] Updating source flux to 2.9e-13
[Sat Dec  3 12:38:50 2011] Flag c found in src. 42 procflags, skipping spectral fitting