[Tue Nov 29 11:06:37 2011] Detection parameters:
  Position = (296.3, 396.3) = 16 41 1.18 -53 39 34.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 292.3 +/- 25.5
  Background counts = 94.1
  Rate = 0.02 +/- 0.002

[Tue Nov 29 11:06:41 2011] Off-axis axis estimate = 7.10'
[Thu Dec  1 02:03:15 2011] Using EEF radius (= 9.98 ")to estimate initial spatial extent for simple fitting
[Thu Dec  1 02:03:15 2011] Initial guess for spatial extent in simple fitting = 9.98"
[Thu Dec  1 02:03:15 2011] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.961
[Thu Dec  1 02:03:15 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 9.98"
[Thu Dec  1 04:50:37 2011] fullrun_mos1_xmm0105470101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Dec  1 04:50:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105470101_pi300-10000_cl_pass0_src1.csv
[Thu Dec  1 04:50:37 2011] fullrun_mos1_xmm0105470101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Dec  1 04:50:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105470101_pi300-10000_cl_pass0_src1.csv
[Thu Dec  1 04:50:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105470101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105470101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 04:50:38 2011] fullrun_mos1_xmm0105470101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Dec  1 04:50:38 2011] fullrun_mos1_xmm0105470101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Dec  1 04:50:38 2011] Fit fullrun_mos1_xmm0105470101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Dec  1 06:20:52 2011] Warning, spatial fit 1 centroid is now closest to src. 16
[Thu Dec  1 06:20:52 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 06:20:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 06:20:52 2011] Assessing source extent using major
[Thu Dec  1 06:20:52 2011] Source does appear to be extended
[Thu Dec  1 06:20:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 14:37:23 2011] Using EEF radius (= 9.98 ")to estimate initial spatial extent for simple fitting
[Thu Dec  1 14:37:23 2011] Initial guess for spatial extent in simple fitting = 9.98"
[Thu Dec  1 14:37:23 2011] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.961
[Thu Dec  1 14:37:23 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 9.98"
[Thu Dec  1 17:39:36 2011] fullrun_mos1_xmm0105470101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Dec  1 17:39:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105470101_pi300-10000_cl_pass1_src1.csv
[Thu Dec  1 17:39:36 2011] fullrun_mos1_xmm0105470101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Dec  1 17:39:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105470101_pi300-10000_cl_pass1_src1.csv
[Thu Dec  1 17:39:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105470101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105470101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 17:39:37 2011] fullrun_mos1_xmm0105470101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Dec  1 17:39:37 2011] fullrun_mos1_xmm0105470101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Dec  1 17:39:37 2011] Fit fullrun_mos1_xmm0105470101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Dec  1 19:12:05 2011] Warning, spatial fit 1 centroid is now closest to src. 16
[Thu Dec  1 19:12:05 2011] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 21.315424 pixels away
[Thu Dec  1 19:12:05 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 19:12:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 19:12:05 2011] Assessing source extent using major
[Thu Dec  1 19:12:05 2011] Source does appear to be extended
[Thu Dec  1 19:12:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 09:57:02 2011] XMMSAS src. selection expression = ellipse(25728.682953, 34429.909576, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec  3 09:57:02 2011] Writing source region out to fullrun_mos1_xmm0105470101_pi300-10000_pass1_cl_src2_src.reg
[Sat Dec  3 09:57:02 2011] Extracting stamp from image fullrun_mos1_xmm0105470101_pi300-10000_cl_sm2.00.img.gz, (259, 359) - (334, 434)
[Sat Dec  3 09:57:02 2011] XMMSAS bgd. selection expression = annulus(25728.682953, 34429.909576, 1087.500000, 2175.000000, X, Y) && !ellipse(25060.637000, 37751.726000, 1303.976038, 616.179218, 90.000000, X, Y) && !ellipse(25386.517400, 36055.826600, 1705.232049, 392.206411, 73.803700, X, Y) && !ellipse(25546.582458, 35354.112000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25355.054000, 36213.972000, 640.105618, 640.105618, 0.000000, X, Y) && !ellipse(25209.267980, 36749.110000, 1000.920029, 1000.920029, 0.000000, X, Y)
[Sat Dec  3 09:57:02 2011] Writing fullrun_mos1_xmm0105470101_pi300-10000_pass1_cl_src2.gif
[Sat Dec  3 09:57:06 2011] Mean detx,y = (7102.17, -188.61) 
[Sat Dec  3 09:57:07 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec  3 09:57:20 2011] Binned source spectrum to 10 counts/bin
[Sat Dec  3 09:57:20 2011] Setting source spectrum file to fullrun_mos1_xmm0105470101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Dec  3 09:57:20 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0105470101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Dec  3 10:07:48 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec  3 10:07:48 2011] rmf not generated due to insufficient counts
[Sat Dec  3 12:38:46 2011] Updating aperture counts using extracted products
[Sat Dec  3 12:38:47 2011] Error reading totcts from fullrun_mos1_xmm0105470101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Dec  3 12:38:47 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec  3 12:38:47 2011] Using photon index=1.80, rate=0.0211, arf fullrun_mos1_xmm0105470101_pi300-10000_pass1_cl_src2.arf
[Sat Dec  3 12:38:47 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec  3 12:38:47 2011] Updating source flux to 2.8e-13
[Sat Dec  3 12:38:50 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Dec  3 12:40:48 2011] xmm0105470101/analysis//spectral/fullrun_mos1_xmm0105470101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete