[Tue Nov 29 11:06:38 2011] Detection parameters:
  Position = (287.1, 447.0) = 16 41 5.65 -53 35 54.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 138.4 +/- 17.5
  Background counts = 37.0
  Rate = 0.01 +/- 0.002

[Tue Nov 29 11:06:41 2011] Off-axis axis estimate = 10.80'
[Thu Dec  1 02:03:15 2011] Using EEF radius (= 11.83 ")to estimate initial spatial extent for simple fitting
[Thu Dec  1 02:03:15 2011] Initial guess for spatial extent in simple fitting = 11.83"
[Thu Dec  1 02:03:15 2011] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.868
[Thu Dec  1 02:03:15 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 11.83"
[Thu Dec  1 04:50:37 2011] fullrun_mos1_xmm0105470101_pi300-10000_cl_pass0_src4.ximg exists
[Thu Dec  1 04:50:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105470101_pi300-10000_cl_pass0_src4.csv
[Thu Dec  1 04:50:37 2011] fullrun_mos1_xmm0105470101_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Dec  1 04:50:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105470101_pi300-10000_cl_pass0_src4.csv
[Thu Dec  1 04:50:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105470101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105470101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 04:50:38 2011] fullrun_mos1_xmm0105470101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Dec  1 04:50:38 2011] fullrun_mos1_xmm0105470101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Dec  1 04:50:38 2011] Fit fullrun_mos1_xmm0105470101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Thu Dec  1 06:20:52 2011] Warning, spatial fit 4 centroid is now closest to src. 28
[Thu Dec  1 06:20:52 2011] Source 13 is offset by -9.514525 and 2.675230 pixels which is larger than
2 X fitted extent = 1.393531 x 1.393531, not incorporating fit results
[Thu Dec  1 06:20:52 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 06:20:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 06:20:52 2011] Assessing source extent using major
[Thu Dec  1 06:20:52 2011] Source does appear to be extended
[Thu Dec  1 06:20:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 06:20:52 2011] Source is confused with source 27
[Thu Dec  1 06:20:52 2011] Source is confused with source 12
[Thu Dec  1 14:37:23 2011] Using EEF radius (= 11.83 ")to estimate initial spatial extent for simple fitting
[Thu Dec  1 14:37:23 2011] Initial guess for spatial extent in simple fitting = 11.83"
[Thu Dec  1 14:37:23 2011] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.868
[Thu Dec  1 14:37:23 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 11.83"
[Thu Dec  1 17:39:37 2011] fullrun_mos1_xmm0105470101_pi300-10000_cl_pass1_src4.ximg exists
[Thu Dec  1 17:39:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105470101_pi300-10000_cl_pass1_src4.csv
[Thu Dec  1 17:39:37 2011] fullrun_mos1_xmm0105470101_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Dec  1 17:39:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105470101_pi300-10000_cl_pass1_src4.csv
[Thu Dec  1 17:39:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105470101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105470101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 17:39:37 2011] fullrun_mos1_xmm0105470101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Dec  1 17:39:37 2011] fullrun_mos1_xmm0105470101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Dec  1 17:39:38 2011] Fit fullrun_mos1_xmm0105470101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Thu Dec  1 19:12:05 2011] Spatial fit model total counts = 882.082000, observed total counts = 882.000000
[Thu Dec  1 19:12:05 2011] Offset between fit and detection position for source 13 = 4.375322 pixels
[Thu Dec  1 19:12:05 2011] 428.733000 total counts/ 221.049000 bgd. counts: snr = 13.968789
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 4.375322 pixels
  Position = (285.8, 451.2) = 16 41 6.32 -53 35 36.3
  Extent = 14.2 (9.2-23.7)", rotation angle = 0
  Source counts = 207.7 +/- 20.7
  Background counts = 221.0
  Rate = 0.01 +/- 0.001
[Thu Dec  1 19:12:05 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 19:12:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 19:12:05 2011] Assessing source extent using major axis lower bound
[Thu Dec  1 19:12:05 2011] Source does appear to be extended
[Thu Dec  1 19:12:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 09:57:02 2011] XMMSAS src. selection expression = ellipse(24813.137400, 39204.422000, 849.852024, 849.852024, 0.000000, X, Y)
[Sat Dec  3 09:57:02 2011] Writing source region out to fullrun_mos1_xmm0105470101_pi300-10000_pass1_cl_src13_src.reg
[Sat Dec  3 09:57:02 2011] Extracting stamp from image fullrun_mos1_xmm0105470101_pi300-10000_cl_sm2.00.img.gz, (237, 402) - (335, 500)
[Sat Dec  3 09:57:02 2011] XMMSAS bgd. selection expression = annulus(24813.137400, 39204.422000, 1416.420041, 2832.840082, X, Y) && !ellipse(25060.637000, 37751.726000, 1303.976038, 616.179218, 90.000000, X, Y) && !ellipse(25220.830115, 37225.831535, 453.159076, 434.461301, 357.715725, X, Y) && !ellipse(25386.517400, 36055.826600, 1705.232049, 392.206411, 73.803700, X, Y) && !ellipse(25355.054000, 36213.972000, 640.105618, 640.105618, 0.000000, X, Y) && !ellipse(24575.391600, 40981.630000, 1015.368029, 1015.368029, 0.000000, X, Y) && !ellipse(25209.267980, 36749.110000, 1000.920029, 1000.920029, 0.000000, X, Y) && !ellipse(24772.606903, 39970.268066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24410.565200, 41883.022800, 2594.896075, 580.856817, 79.683300, X, Y) && !ellipse(24556.784882, 41183.555389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24364.517380, 42270.131000, 2133.024061, 427.880012, 79.227000, X, Y) && !ellipse(24871.473200, 39499.244000, 1909.768055, 1909.768055, 0.000000, X, Y)
[Sat Dec  3 09:57:02 2011] Writing fullrun_mos1_xmm0105470101_pi300-10000_pass1_cl_src13.gif
[Sat Dec  3 09:57:58 2011] Mean detx,y = (11874.12, -324.01) 
[Sat Dec  3 09:57:59 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec  3 09:58:06 2011] Binned source spectrum to 10 counts/bin
[Sat Dec  3 09:58:06 2011] Setting source spectrum file to fullrun_mos1_xmm0105470101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Dec  3 09:58:06 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0105470101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sat Dec  3 12:38:47 2011] Updating aperture counts using extracted products
[Sat Dec  3 12:38:47 2011] Error reading totcts from fullrun_mos1_xmm0105470101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Dec  3 12:38:47 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec  3 12:38:47 2011] Using photon index=1.80, rate=0.0106, arf fullrun_mos1_xmm0105470101_pi300-10000_pass1_cl_src13.arf
[Sat Dec  3 12:38:47 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec  3 12:38:47 2011] Updating source flux to 1.9e-13
[Sat Dec  3 12:38:50 2011] Flag b found in src. 13 procflags, skipping spectral fitting
[Sat Dec  3 12:38:50 2011] Flag c found in src. 13 procflags, skipping spectral fitting