[Sat Aug 11 10:24:31 2012] Detection parameters:
  Position = (332.0, 210.1) = 15 48 3.61 -45 36 41.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 321.7 +/- 23.7
  Background counts = 27.6
  Rate = 0.04 +/- 0.003

[Sat Aug 11 10:24:31 2012] Off-axis axis estimate = 6.85'
[Sat Aug 11 10:28:10 2012] Using EEF radius (= 9.86 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 10:28:10 2012] Initial guess for spatial extent in simple fitting = 9.86"
[Sat Aug 11 10:28:10 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.177
[Sat Aug 11 10:28:10 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 9.86"
[Sat Aug 11 13:00:23 2012] fullrun_pn_xmm0105460501_pi300-10000_cl_pass0_src37.ximg exists
[Sat Aug 11 13:00:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105460501_pi300-10000_cl_pass0_src37.csv
[Sat Aug 11 13:00:23 2012] fullrun_pn_xmm0105460501_pi300-10000_cl_pass0_src37_1.ximg exists
[Sat Aug 11 13:00:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105460501_pi300-10000_cl_pass0_src37.csv
[Sat Aug 11 13:00:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105460501_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105460501_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 13:00:24 2012] fullrun_pn_xmm0105460501_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Sat Aug 11 13:00:24 2012] fullrun_pn_xmm0105460501_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Sat Aug 11 13:00:24 2012] Fit fullrun_pn_xmm0105460501_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Sat Aug 11 14:25:04 2012] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 13.496428 pixels away
[Sat Aug 11 14:25:04 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 14:25:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 14:25:04 2012] Assessing source extent using major
[Sat Aug 11 14:25:04 2012] Source does appear to be extended
[Sat Aug 11 14:25:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 14:25:04 2012] Source is confused with source 41
[Sat Aug 11 14:25:27 2012] Using EEF radius (= 9.86 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 14:25:27 2012] Initial guess for spatial extent in simple fitting = 9.86"
[Sat Aug 11 14:25:27 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.177
[Sat Aug 11 14:25:27 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 9.86"
[Sat Aug 11 16:25:24 2012] fullrun_pn_xmm0105460501_pi300-10000_cl_pass1_src28.ximg exists
[Sat Aug 11 16:25:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105460501_pi300-10000_cl_pass1_src28.csv
[Sat Aug 11 16:25:24 2012] fullrun_pn_xmm0105460501_pi300-10000_cl_pass1_src28_1.ximg exists
[Sat Aug 11 16:25:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105460501_pi300-10000_cl_pass1_src28.csv
[Sat Aug 11 16:25:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105460501_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105460501_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 16:25:25 2012] fullrun_pn_xmm0105460501_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Sat Aug 11 16:25:25 2012] fullrun_pn_xmm0105460501_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Sat Aug 11 16:25:25 2012] Fit fullrun_pn_xmm0105460501_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Sat Aug 11 17:11:13 2012] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 12.744181 pixels away
[Sat Aug 11 17:11:13 2012] Spatial fit model total counts = 925.700000, observed total counts = 930.000000
[Sat Aug 11 17:11:13 2012] Offset between fit and detection position for source 39 = 8.525251 pixels
[Sat Aug 11 17:11:13 2012] Warning, changing simple spatial fit ID from 28 to 26
[Sat Aug 11 17:11:13 2012] 925.213000 total counts/ 386.570000 bgd. counts: snr = 27.395987
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 8.525251 pixels
  Position = (330.2, 218.4) = 15 48 4.37 -45 36 5.7
  Extent = 22.6" x 4.9", rotation angle = 77
  Source counts = 538.6 +/- 30.4
  Background counts = 386.6
  Rate = 0.04 +/- 0.002
[Sat Aug 11 17:11:13 2012] Spatial fit model total counts = 926.281000, observed total counts = 936.000000
[Sat Aug 11 17:11:13 2012] Offset between fit and detection position for source 39 = 3.022698 pixels
[Sat Aug 11 17:11:13 2012] Warning, changing simple spatial fit ID from 26 to 28
[Sat Aug 11 17:11:13 2012] 875.548100 total counts/ 72.328100 bgd. counts: snr = 94.445438
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 3.022698 pixels
  Position = (330.5, 215.4) = 15 48 4.24 -45 36 18.8
  Extent = 18.5 (18.4-18.6)", rotation angle = 0
  Source counts = 803.2 +/- 29.6
  Background counts = 72.3
  Rate = 0.05 +/- 0.002
[Sat Aug 11 17:11:13 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 17:11:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 17:11:13 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 17:11:13 2012] Source does appear to be extended
[Sat Aug 11 17:11:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 17:11:31 2012] XMMSAS src. selection expression = ellipse(28705.118200, 18689.512000, 1109.388032, 1109.388032, 0.000000, X, Y)
[Sat Aug 11 17:11:31 2012] Writing source region out to fullrun_pn_xmm0105460501_pi300-10000_pass1_cl_src39_src.reg
[Sat Aug 11 17:11:31 2012] Extracting stamp from image fullrun_pn_xmm0105460501_pi300-10000_cl_sm2.00.img.gz, (267, 152) - (394, 279)
[Sat Aug 11 17:11:31 2012] XMMSAS bgd. selection expression = annulus(28705.118200, 18689.512000, 1848.980053, 3697.960106, X, Y) && !ellipse(29465.964803, 15568.835528, 1778.952051, 630.547093, 90.000000, X, Y) && !ellipse(29573.552011, 15207.793582, 2394.720069, 404.182148, 75.952037, X, Y) && !ellipse(29724.722400, 14633.238000, 526.844015, 526.844015, 0.000000, X, Y) && !ellipse(29815.715576, 14303.268829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32985.701080, 22914.582886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28882.929443, 22634.384369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27680.995853, 23129.216299, 1250.144036, 446.215391, 75.568181, X, Y) && !ellipse(26180.401672, 22641.606049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27990.543152, 21858.224500, 1325.504038, 391.276626, 74.712865, X, Y) && !ellipse(32214.292938, 22068.142288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28071.341000, 21551.854000, 800.232023, 800.232023, 0.000000, X, Y) && !ellipse(28404.063200, 20101.290000, 904.288026, 904.288026, 0.000000, X, Y) && !ellipse(28492.644200, 19797.848000, 992.200029, 992.200029, 0.000000, X, Y) && !ellipse(28691.223200, 18900.104400, 638.516818, 638.516818, 0.000000, X, Y) && !ellipse(28986.457200, 17633.401000, 1576.896045, 371.226411, 78.154000, X, Y) && !ellipse(29243.816956, 16479.746353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29885.125600, 14009.378000, 1188.384034, 1188.384034, 0.000000, X, Y)
[Sat Aug 11 17:11:31 2012] Writing fullrun_pn_xmm0105460501_pi300-10000_pass1_cl_src39.gif
[Sat Aug 11 17:42:10 2012] Mean detx,y = (-11.80, 9140.03) 
[Sat Aug 11 17:42:15 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 11 17:43:21 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 11 17:43:22 2012] Setting source spectrum file to fullrun_pn_xmm0105460501_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sat Aug 11 17:43:22 2012] Setting bgd. spectrum file to fullrun_pn_xmm0105460501_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Sat Aug 11 20:03:07 2012] Updating aperture counts using extracted products
[Sat Aug 11 20:03:07 2012] Error reading totcts from fullrun_pn_xmm0105460501_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sat Aug 11 20:03:09 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 20:03:09 2012] Using photon index=1.80, rate=0.0544, arf fullrun_pn_xmm0105460501_pi300-10000_pass1_cl_src39.arf
[Sat Aug 11 20:03:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 20:03:10 2012] Updating source flux to 2.1e-13
[Sat Aug 11 20:04:23 2012] Flag c found in src. 39 procflags, skipping spectral fitting