[Sat Aug 11 10:25:55 2012] Detection parameters:
  Position = (305.8, 321.0) = 15 48 14.49 -45 28 39.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41576.1 +/- 240.0
  Background counts = 15.3
  Rate = 2 +/- 0.01

[Sat Aug 11 10:25:56 2012] Off-axis axis estimate = 1.72'
[Sat Aug 11 13:28:17 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 13:28:17 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Aug 11 13:28:17 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Sat Aug 11 13:28:17 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sat Aug 11 14:24:49 2012] fullrun_mos2_xmm0105460501_pi300-10000_cl_pass0_src1.ximg exists
[Sat Aug 11 14:24:49 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0105460501_pi300-10000_cl_pass0_src1.csv
[Sat Aug 11 14:24:49 2012] fullrun_mos2_xmm0105460501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Aug 11 14:24:49 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0105460501_pi300-10000_cl_pass0_src1.csv
[Sat Aug 11 14:24:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105460501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105460501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 14:24:49 2012] fullrun_mos2_xmm0105460501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Aug 11 14:24:49 2012] fullrun_mos2_xmm0105460501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Aug 11 14:24:49 2012] Fit fullrun_mos2_xmm0105460501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Aug 11 14:25:14 2012] Spatial fit model total counts = 39875.900000, observed total counts = 39168.000000
[Sat Aug 11 14:25:14 2012] Offset between fit and detection position for source 1 = 0.199470 pixels
[Sat Aug 11 14:25:14 2012] 39888.180000 total counts/ 9168.480000 bgd. counts: snr = 320.825071
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.199470 pixels
  Position = (305.6, 321.0) = 15 48 14.58 -45 28 39.3
  Extent = 6.4 (6.4-6.5)", rotation angle = 0
  Source counts = 30719.7 +/- 199.7
  Background counts = 9168.5
  Rate = 2 +/- 0.01
[Sat Aug 11 14:25:14 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 14:25:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 14:25:14 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 14:25:14 2012] Source does appear to be extended
[Sat Aug 11 14:25:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 16:41:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 11 16:41:41 2012] Initial guess for spatial extent in simple fitting = 6.44"
[Sat Aug 11 16:41:41 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.019
[Sat Aug 11 16:41:41 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.44"
[Sat Aug 11 17:11:01 2012] fullrun_mos2_xmm0105460501_pi300-10000_cl_pass1_src1.ximg exists
[Sat Aug 11 17:11:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105460501_pi300-10000_cl_pass1_src1.csv
[Sat Aug 11 17:11:01 2012] fullrun_mos2_xmm0105460501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Aug 11 17:11:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105460501_pi300-10000_cl_pass1_src1.csv
[Sat Aug 11 17:11:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105460501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105460501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 17:11:01 2012] fullrun_mos2_xmm0105460501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Aug 11 17:11:01 2012] fullrun_mos2_xmm0105460501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Aug 11 17:11:01 2012] Fit fullrun_mos2_xmm0105460501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Aug 11 17:11:19 2012] Spatial fit model total counts = 39617.500000, observed total counts = 39238.000000
[Sat Aug 11 17:11:19 2012] Offset between fit and detection position for source 1 = 0.011424 pixels
[Sat Aug 11 17:11:19 2012] 39712.190000 total counts/ 9026.390000 bgd. counts: snr = 322.983550
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.011424 pixels
  Position = (305.6, 321.0) = 15 48 14.58 -45 28 39.3
  Extent = 6.4 (6.4-6.5)", rotation angle = 0
  Source counts = 30685.8 +/- 199.3
  Background counts = 9026.4
  Rate = 2 +/- 0.01
[Sat Aug 11 17:11:19 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 17:11:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 17:11:19 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 17:11:19 2012] Source does appear to be extended
[Sat Aug 11 17:11:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 19:50:31 2012] Counts = 30685.800000, rescaling region sizes by 3.000000
[Sat Aug 11 19:50:31 2012] XMMSAS src. selection expression = ellipse(26536.003400, 27878.454200, 1156.924833, 1156.924833, 0.000000, X, Y)
[Sat Aug 11 19:50:31 2012] Writing source region out to fullrun_mos2_xmm0105460501_pi300-10000_pass1_cl_src1_src.reg
[Sat Aug 11 19:50:31 2012] Extracting stamp from image fullrun_mos2_xmm0105460501_pi300-10000_cl_sm2.00.img.gz, (239, 255) - (372, 387)
[Sat Aug 11 19:50:31 2012] XMMSAS bgd. selection expression = annulus(26536.003400, 27878.454200, 5784.624166, 11569.248333, X, Y) && !ellipse(26749.163058, 31892.814400, 393.139211, 393.139211, 0.000000, X, Y) && !ellipse(27628.937866, 27893.548706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27271.618713, 28770.475677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27587.025574, 27373.194824, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 11 19:50:31 2012] Writing fullrun_mos2_xmm0105460501_pi300-10000_pass1_cl_src1.gif
[Sat Aug 11 19:50:39 2012] Mean detx,y = (152.35, 136.97) 
[Sat Aug 11 19:50:42 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 11 19:56:30 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 11 19:56:31 2012] Setting source spectrum file to fullrun_mos2_xmm0105460501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Aug 11 19:56:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0105460501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Aug 11 20:03:10 2012] Updating aperture counts using extracted products
[Sat Aug 11 20:03:10 2012] Error reading totcts from fullrun_mos2_xmm0105460501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Aug 11 20:03:10 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 20:03:10 2012] Using photon index=1.80, rate=1.66, arf fullrun_mos2_xmm0105460501_pi300-10000_pass1_cl_src1.arf
[Sat Aug 11 20:03:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 20:03:10 2012] Updating source flux to 1.6e-11
[Sat Aug 11 20:04:23 2012] Reading fit data from xmm0105460501/analysis//spectral/fullrun_mos2_xmm0105460501_pi300-10000_pass1_cl_src1_pl.csv
[Sat Aug 11 20:04:23 2012] Spectral fit parameter nH value = 74192500000.0
[Sat Aug 11 20:04:23 2012] Spectral fit parameter PhoIndex value = 1.48622
[Sat Aug 11 20:04:23 2012] Failed to get F(0.3-8.0) from xmm0105460501/analysis//spectral/fullrun_mos2_xmm0105460501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Aug 11 20:04:23 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 20:04:23 2012] Using Nh = 7.4e+10, photon index=1.49, rate=1.66, arf fullrun_mos2_xmm0105460501_pi300-10000_pass1_cl_src1.arf
[Sat Aug 11 20:04:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 20:04:23 2012] Updating source flux to 1.9e-11