[Wed Aug 1 13:47:06 2012] Detection parameters: Position = (348.3, 193.0) = 15 47 55.88 -45 38 0.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 270.1 +/- 22.4 Background counts = 28.3 Rate = 0.01 +/- 0.001 [Wed Aug 1 13:47:06 2012] Off-axis axis estimate = 8.46' [Wed Aug 1 13:50:37 2012] Using EEF radius (= 10.66 ")to estimate initial spatial extent for simple fitting [Wed Aug 1 13:50:37 2012] Initial guess for spatial extent in simple fitting = 10.66" [Wed Aug 1 13:50:37 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.034 [Wed Aug 1 13:50:37 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 10.66" [Wed Aug 1 16:17:33 2012] fullrun_pn_xmm0105460301_pi300-10000_cl_pass0_src47.ximg exists [Wed Aug 1 16:17:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105460301_pi300-10000_cl_pass0_src47.csv [Wed Aug 1 16:17:33 2012] fullrun_pn_xmm0105460301_pi300-10000_cl_pass0_src47_1.ximg exists [Wed Aug 1 16:17:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105460301_pi300-10000_cl_pass0_src47.csv [Wed Aug 1 16:17:33 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0105460301_pi300-10000_cl_pass0_src47_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0105460301_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 1 16:17:34 2012] fullrun_pn_xmm0105460301_pi300-10000_cl_pass0_tfrozen_src47.ximg exists [Wed Aug 1 16:17:34 2012] fullrun_pn_xmm0105460301_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists [Wed Aug 1 16:17:34 2012] Fit fullrun_pn_xmm0105460301_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly [Wed Aug 1 17:11:02 2012] Warning, spatial fit 47 centroid is now closest to src. 44 [Wed Aug 1 17:11:02 2012] Source 48 is offset by 4.737752 and 7.529765 pixels which is larger than 2 X fitted extent = 1.308262 x 1.308262, not incorporating fit results [Wed Aug 1 17:11:02 2012] Vigneting correction estimate = 1.000000 [Wed Aug 1 17:11:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Aug 1 17:11:02 2012] Assessing source extent using major [Wed Aug 1 17:11:02 2012] Source does appear to be extended [Wed Aug 1 17:11:02 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Aug 1 17:11:02 2012] Source is confused with source 44 [Wed Aug 1 17:11:25 2012] Using EEF radius (= 10.66 ")to estimate initial spatial extent for simple fitting [Wed Aug 1 17:11:25 2012] Initial guess for spatial extent in simple fitting = 10.66" [Wed Aug 1 17:11:25 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.034 [Wed Aug 1 17:11:25 2012] Giving source the simple spatial ID 36 for pass 1, mean size = 10.66" [Wed Aug 1 19:12:38 2012] fullrun_pn_xmm0105460301_pi300-10000_cl_pass1_src36.ximg exists [Wed Aug 1 19:12:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105460301_pi300-10000_cl_pass1_src36.csv [Wed Aug 1 19:12:38 2012] fullrun_pn_xmm0105460301_pi300-10000_cl_pass1_src36_1.ximg exists [Wed Aug 1 19:12:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105460301_pi300-10000_cl_pass1_src36.csv [Wed Aug 1 19:12:38 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0105460301_pi300-10000_cl_pass1_src36_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0105460301_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 1 19:12:39 2012] fullrun_pn_xmm0105460301_pi300-10000_cl_pass1_tfrozen_src36.ximg exists [Wed Aug 1 19:12:39 2012] fullrun_pn_xmm0105460301_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists [Wed Aug 1 19:12:39 2012] Fit fullrun_pn_xmm0105460301_pi300-10000_cl_pass1_tfrozen_src36 appears to have run properly [Wed Aug 1 19:37:38 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 48 at 15.765470 pixels away [Wed Aug 1 19:37:38 2012] Warning, spatial fit 36 centroid is now closest to src. 51 [Wed Aug 1 19:37:38 2012] Spatial fit model total counts = 1471.250000, observed total counts = 1474.000000 [Wed Aug 1 19:37:38 2012] Offset between fit and detection position for source 48 = 1.590194 pixels [Wed Aug 1 19:37:38 2012] Warning, changing simple spatial fit ID from 36 to 38 [Wed Aug 1 19:37:38 2012] 1454.745000 total counts/ 316.975000 bgd. counts: snr = 63.906050 Spatial fit parameters: Offset between fit and detection position for source 48 = 1.590194 pixels Position = (346.7, 193.3) = 15 47 56.53 -45 37 58.5 Extent = 30.3 (29.0-31.0)", rotation angle = 0 Source counts = 1137.8 +/- 38.1 Background counts = 317.0 Rate = 0.06 +/- 0.002 [Wed Aug 1 19:37:38 2012] Vigneting correction estimate = 1.000000 [Wed Aug 1 19:37:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Aug 1 19:37:38 2012] Assessing source extent using major axis lower bound [Wed Aug 1 19:37:38 2012] Source does appear to be extended [Wed Aug 1 19:37:38 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Aug 1 19:37:53 2012] Counts = 1137.770000, rescaling region sizes by 2.000000 [Wed Aug 1 19:37:53 2012] XMMSAS src. selection expression = ellipse(30115.336000, 16768.584000, 3636.672105, 3636.672105, 0.000000, X, Y) [Wed Aug 1 19:37:53 2012] Writing source region out to fullrun_pn_xmm0105460301_pi300-10000_pass1_cl_src48_src.reg [Wed Aug 1 19:37:53 2012] Extracting stamp from image fullrun_pn_xmm0105460301_pi300-10000_cl_sm2.00.img.gz, (138, 0) - (556, 402) [Wed Aug 1 19:37:53 2012] XMMSAS bgd. selection expression = annulus(30115.336000, 16768.584000, 12122.240349, 24244.480698, X, Y) && !ellipse(26353.978800, 27931.909800, 1458.909642, 1458.909642, 0.000000, X, Y) && !ellipse(30976.842194, 14653.609238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18480.823349, 32524.663208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28751.713760, 37947.115200, 498.870414, 498.870414, 0.000000, X, Y) && !ellipse(31106.693600, 14366.002000, 1308.168038, 1308.168038, 0.000000, X, Y) && !ellipse(26580.562100, 31943.277200, 352.200810, 352.200810, 0.000000, X, Y) && !ellipse(15059.125137, 30951.733582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26634.605499, 30733.038818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38853.754440, 29928.720800, 444.867213, 444.867213, 0.000000, X, Y) && !ellipse(39707.284760, 29588.572510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26688.231781, 29478.866699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26228.346191, 29175.630493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17756.884476, 28648.838165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31440.349243, 25818.348602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27168.032000, 25895.992000, 1104.656032, 1104.656032, 0.000000, X, Y) && !ellipse(27270.955800, 25277.578000, 912.640026, 912.640026, 0.000000, X, Y) && !ellipse(16791.806800, 24915.910000, 877.432025, 877.432025, 0.000000, X, Y) && !ellipse(35093.627075, 24932.989258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27574.914000, 24507.443200, 1180.160034, 390.509611, 70.702300, X, Y) && !ellipse(27962.537420, 23328.855800, 1283.840037, 333.968010, 68.610500, X, Y) && !ellipse(28137.727450, 22823.438000, 1283.840037, 342.576810, 70.644000, X, Y) && !ellipse(32787.667755, 22917.614929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28156.586400, 22756.431400, 1626.416047, 347.140010, 71.134000, X, Y) && !ellipse(28260.036720, 22560.260000, 1009.744029, 1009.744029, 0.000000, X, Y) && !ellipse(28633.634000, 21202.736000, 1422.800041, 1422.800041, 0.000000, X, Y) && !ellipse(28882.057600, 20758.562000, 1157.576033, 1157.576033, 0.000000, X, Y) && !ellipse(39673.810150, 20418.465057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29085.200400, 20064.436000, 650.805619, 650.805619, 0.000000, X, Y) && !ellipse(29240.596460, 19640.258216, 1510.656043, 353.311316, 70.339977, X, Y) && !ellipse(29614.299460, 18584.600200, 1780.120051, 417.427212, 70.405937, X, Y) && !ellipse(29951.958000, 17277.676000, 1691.328049, 1691.328049, 0.000000, X, Y) && !ellipse(22501.932922, 17755.615372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31937.153015, 17184.624771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25782.564117, 16962.605911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30406.832600, 16408.612000, 1333.472038, 1333.472038, 0.000000, X, Y) && !ellipse(30654.184000, 15229.554000, 1635.184047, 1635.184047, 0.000000, X, Y) && !ellipse(24703.082306, 11802.474167, 870.000000, 870.000000, 0.000000, X, Y) [Wed Aug 1 19:37:53 2012] Writing fullrun_pn_xmm0105460301_pi300-10000_pass1_cl_src48.gif [Wed Aug 1 20:06:29 2012] Mean detx,y = (52.38, 11137.61) [Wed Aug 1 20:06:36 2012] Setting backscal keywords in source and bgd. spectrum [Wed Aug 1 20:16:01 2012] Binned source spectrum to 10 counts/bin [Wed Aug 1 20:16:01 2012] Setting source spectrum file to fullrun_pn_xmm0105460301_pi300-10000_pass1_cl_src48_src_b10.pi.gz [Wed Aug 1 20:16:01 2012] Setting bgd. spectrum file to fullrun_pn_xmm0105460301_pi300-10000_pass1_cl_src48_bgd.pi.gz [Wed Aug 1 22:39:06 2012] Updating aperture counts using extracted products [Wed Aug 1 22:39:06 2012] Error reading totcts from fullrun_pn_xmm0105460301_pi300-10000_pass1_cl_src48_src_b10.pi.gz [Wed Aug 1 22:39:08 2012] Calculating source flux in energy range 0.30-8.00 [Wed Aug 1 22:39:08 2012] Using photon index=1.80, rate=0.0605, arf fullrun_pn_xmm0105460301_pi300-10000_pass1_cl_src48.arf [Wed Aug 1 22:39:08 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Aug 1 22:39:08 2012] Updating source flux to 2.4e-13 [Wed Aug 1 22:39:54 2012] Flag b found in src. 48 procflags, skipping spectral fitting [Wed Aug 1 22:39:54 2012] Flag c found in src. 48 procflags, skipping spectral fitting