[Wed Aug  1 13:48:07 2012] Detection parameters:
  Position = (303.5, 321.7) = 15 48 14.47 -45 28 40.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36155.2 +/- 223.1
  Background counts = 18.1
  Rate = 2 +/- 0.01

[Wed Aug  1 13:48:07 2012] Off-axis axis estimate = 1.73'
[Wed Aug  1 16:38:58 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 16:38:58 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Wed Aug  1 16:38:58 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Wed Aug  1 16:38:58 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Wed Aug  1 17:10:43 2012] fullrun_mos2_xmm0105460301_pi300-10000_cl_pass0_src1.ximg exists
[Wed Aug  1 17:10:43 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0105460301_pi300-10000_cl_pass0_src1.csv
[Wed Aug  1 17:10:43 2012] fullrun_mos2_xmm0105460301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Aug  1 17:10:43 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0105460301_pi300-10000_cl_pass0_src1.csv
[Wed Aug  1 17:10:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105460301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105460301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 17:10:43 2012] fullrun_mos2_xmm0105460301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Aug  1 17:10:43 2012] fullrun_mos2_xmm0105460301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Aug  1 17:10:43 2012] Fit fullrun_mos2_xmm0105460301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Aug  1 17:11:11 2012] Spatial fit model total counts = 32571.900000, observed total counts = 32090.000000
[Wed Aug  1 17:11:11 2012] Offset between fit and detection position for source 1 = 0.287148 pixels
[Wed Aug  1 17:11:11 2012] 32618.190000 total counts/ 7323.590000 bgd. counts: snr = 295.573711
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.287148 pixels
  Position = (303.3, 321.5) = 15 48 14.55 -45 28 41.0
  Extent = 6.0 (6.0-6.0)", rotation angle = 0
  Source counts = 25294.6 +/- 180.6
  Background counts = 7323.6
  Rate = 1 +/- 0.009
[Wed Aug  1 17:11:11 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 17:11:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 17:11:11 2012] Assessing source extent using major axis lower bound
[Wed Aug  1 17:11:11 2012] Source does appear to be extended
[Wed Aug  1 17:11:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 19:23:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug  1 19:23:30 2012] Initial guess for spatial extent in simple fitting = 6.00"
[Wed Aug  1 19:23:30 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.850
[Wed Aug  1 19:23:30 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.00"
[Wed Aug  1 19:37:29 2012] fullrun_mos2_xmm0105460301_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug  1 19:37:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105460301_pi300-10000_cl_pass1_src1.csv
[Wed Aug  1 19:37:29 2012] fullrun_mos2_xmm0105460301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug  1 19:37:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105460301_pi300-10000_cl_pass1_src1.csv
[Wed Aug  1 19:37:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105460301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105460301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 19:37:29 2012] fullrun_mos2_xmm0105460301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug  1 19:37:29 2012] fullrun_mos2_xmm0105460301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug  1 19:37:29 2012] Fit fullrun_mos2_xmm0105460301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug  1 19:37:41 2012] Spatial fit model total counts = 32588.800000, observed total counts = 32176.000000
[Wed Aug  1 19:37:41 2012] Offset between fit and detection position for source 1 = 0.014804 pixels
[Wed Aug  1 19:37:41 2012] 32743.470000 total counts/ 7329.870000 bgd. counts: snr = 296.837014
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.014804 pixels
  Position = (303.3, 321.5) = 15 48 14.55 -45 28 41.1
  Extent = 6.0 (6.0-6.1)", rotation angle = 0
  Source counts = 25413.6 +/- 181.0
  Background counts = 7329.9
  Rate = 1 +/- 0.009
[Wed Aug  1 19:37:41 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 19:37:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 19:37:41 2012] Assessing source extent using major axis lower bound
[Wed Aug  1 19:37:41 2012] Source does appear to be extended
[Wed Aug  1 19:37:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 22:23:04 2012] Counts = 25413.600000, rescaling region sizes by 3.000000
[Wed Aug  1 22:23:04 2012] XMMSAS src. selection expression = ellipse(26337.058600, 27919.784800, 1085.943631, 1085.943631, 0.000000, X, Y)
[Wed Aug  1 22:23:04 2012] Writing source region out to fullrun_mos2_xmm0105460301_pi300-10000_pass1_cl_src1_src.reg
[Wed Aug  1 22:23:04 2012] Extracting stamp from image fullrun_mos2_xmm0105460301_pi300-10000_cl_sm2.00.img.gz, (241, 259) - (366, 384)
[Wed Aug  1 22:23:04 2012] XMMSAS bgd. selection expression = annulus(26337.058600, 27919.784800, 5429.718156, 10859.436312, X, Y) && !ellipse(18484.679900, 32470.300000, 407.677820, 407.677820, 0.000000, X, Y) && !ellipse(32038.540619, 22126.921982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35066.081146, 24928.932373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27320.988983, 28073.065857, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug  1 22:23:04 2012] Writing fullrun_mos2_xmm0105460301_pi300-10000_pass1_cl_src1.gif
[Wed Aug  1 22:23:08 2012] Mean detx,y = (152.81, 127.31) 
[Wed Aug  1 22:23:10 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  1 22:27:25 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  1 22:27:25 2012] Setting source spectrum file to fullrun_mos2_xmm0105460301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug  1 22:27:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0105460301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Aug  1 22:39:08 2012] Updating aperture counts using extracted products
[Wed Aug  1 22:39:08 2012] Error reading totcts from fullrun_mos2_xmm0105460301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug  1 22:39:08 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 22:39:08 2012] Using photon index=1.80, rate=1.24, arf fullrun_mos2_xmm0105460301_pi300-10000_pass1_cl_src1.arf
[Wed Aug  1 22:39:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  1 22:39:08 2012] Updating source flux to 1.3e-11
[Wed Aug  1 22:39:54 2012] Reading fit data from xmm0105460301/analysis//spectral/fullrun_mos2_xmm0105460301_pi300-10000_pass1_cl_src1_pl.csv
[Wed Aug  1 22:39:54 2012] Spectral fit parameter nH value = 302379000000.0
[Wed Aug  1 22:39:54 2012] Spectral fit parameter PhoIndex value = 1.2519
[Wed Aug  1 22:39:54 2012] Failed to get F(0.3-8.0) from xmm0105460301/analysis//spectral/fullrun_mos2_xmm0105460301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Aug  1 22:39:54 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 22:39:54 2012] Using Nh = 3e+11, photon index=1.25, rate=1.24, arf fullrun_mos2_xmm0105460301_pi300-10000_pass1_cl_src1.arf
[Wed Aug  1 22:39:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  1 22:39:54 2012] Updating source flux to 1.7e-11