[Wed Aug  1 13:47:34 2012] Detection parameters:
  Position = (303.5, 321.2) = 15 48 14.47 -45 28 40.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36193.2 +/- 227.0
  Background counts = 19.1
  Rate = 2 +/- 0.01

[Wed Aug  1 13:47:34 2012] Off-axis axis estimate = 1.69'
[Wed Aug  1 16:17:34 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 16:17:34 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Wed Aug  1 16:17:34 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.060
[Wed Aug  1 16:17:34 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Wed Aug  1 16:38:58 2012] fullrun_mos1_xmm0105460301_pi300-10000_cl_pass0_src1.ximg exists
[Wed Aug  1 16:38:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105460301_pi300-10000_cl_pass0_src1.csv
[Wed Aug  1 16:38:58 2012] fullrun_mos1_xmm0105460301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Aug  1 16:38:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105460301_pi300-10000_cl_pass0_src1.csv
[Wed Aug  1 16:38:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105460301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105460301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 16:38:58 2012] fullrun_mos1_xmm0105460301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Aug  1 16:38:58 2012] fullrun_mos1_xmm0105460301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Aug  1 16:38:58 2012] Fit fullrun_mos1_xmm0105460301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Aug  1 17:11:07 2012] Spatial fit model total counts = 31220.400000, observed total counts = 31220.000000
[Wed Aug  1 17:11:07 2012] Offset between fit and detection position for source 1 = 0.261631 pixels
[Wed Aug  1 17:11:07 2012] 31320.300000 total counts/ 6721.000000 bgd. counts: snr = 300.058408
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.261631 pixels
  Position = (303.3, 321.4) = 15 48 14.54 -45 28 41.4
  Extent = 6.1 (6.0-6.2)", rotation angle = 0
  Source counts = 24599.3 +/- 177.0
  Background counts = 6721.0
  Rate = 1 +/- 0.009
[Wed Aug  1 17:11:07 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 17:11:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 17:11:07 2012] Assessing source extent using major axis lower bound
[Wed Aug  1 17:11:07 2012] Source does appear to be extended
[Wed Aug  1 17:11:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 19:12:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug  1 19:12:39 2012] Initial guess for spatial extent in simple fitting = 6.10"
[Wed Aug  1 19:12:39 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.828
[Wed Aug  1 19:12:39 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.10"
[Wed Aug  1 19:23:30 2012] fullrun_mos1_xmm0105460301_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug  1 19:23:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105460301_pi300-10000_cl_pass1_src1.csv
[Wed Aug  1 19:23:30 2012] fullrun_mos1_xmm0105460301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug  1 19:23:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105460301_pi300-10000_cl_pass1_src1.csv
[Wed Aug  1 19:23:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105460301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105460301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 19:23:30 2012] fullrun_mos1_xmm0105460301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug  1 19:23:30 2012] fullrun_mos1_xmm0105460301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug  1 19:23:30 2012] Fit fullrun_mos1_xmm0105460301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug  1 19:37:40 2012] Spatial fit model total counts = 31220.000000, observed total counts = 31220.000000
[Wed Aug  1 19:37:40 2012] Offset between fit and detection position for source 1 = 0.000015 pixels
[Wed Aug  1 19:37:40 2012] 31319.810000 total counts/ 6718.010000 bgd. counts: snr = 300.155676
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000015 pixels
  Position = (303.3, 321.4) = 15 48 14.54 -45 28 41.4
  Extent = 6.1 (6.0-6.2)", rotation angle = 0
  Source counts = 24601.8 +/- 177.0
  Background counts = 6718.0
  Rate = 1 +/- 0.009
[Wed Aug  1 19:37:40 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 19:37:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 19:37:40 2012] Assessing source extent using major axis lower bound
[Wed Aug  1 19:37:40 2012] Source does appear to be extended
[Wed Aug  1 19:37:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 21:59:17 2012] Counts = 24601.800000, rescaling region sizes by 3.000000
[Wed Aug  1 21:59:17 2012] XMMSAS src. selection expression = ellipse(26337.587800, 27914.105800, 1099.062032, 1099.062032, 0.000000, X, Y)
[Wed Aug  1 21:59:17 2012] Writing source region out to fullrun_mos1_xmm0105460301_pi300-10000_pass1_cl_src1_src.reg
[Wed Aug  1 21:59:17 2012] Extracting stamp from image fullrun_mos1_xmm0105460301_pi300-10000_cl_sm2.00.img.gz, (240, 258) - (366, 385)
[Wed Aug  1 21:59:17 2012] XMMSAS bgd. selection expression = annulus(26337.587800, 27914.105800, 5495.310158, 10990.620316, X, Y) && !ellipse(18501.478149, 32464.510864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32017.271179, 22124.018707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25719.802400, 25955.504000, 1062.048031, 1062.048031, 0.000000, X, Y)
[Wed Aug  1 21:59:17 2012] Writing fullrun_mos1_xmm0105460301_pi300-10000_pass1_cl_src1.gif
[Wed Aug  1 21:59:22 2012] Mean detx,y = (341.70, -313.13) 
[Wed Aug  1 21:59:24 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  1 22:03:16 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  1 22:03:16 2012] Setting source spectrum file to fullrun_mos1_xmm0105460301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug  1 22:03:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0105460301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Aug  1 22:39:08 2012] Updating aperture counts using extracted products
[Wed Aug  1 22:39:08 2012] Error reading totcts from fullrun_mos1_xmm0105460301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug  1 22:39:08 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 22:39:08 2012] Using photon index=1.80, rate=1.2, arf fullrun_mos1_xmm0105460301_pi300-10000_pass1_cl_src1.arf
[Wed Aug  1 22:39:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  1 22:39:08 2012] Updating source flux to 1.1e-11
[Wed Aug  1 22:39:33 2012] Reading fit data from xmm0105460301/analysis//spectral/fullrun_mos1_xmm0105460301_pi300-10000_pass1_cl_src1_pl.csv
[Wed Aug  1 22:39:33 2012] Spectral fit parameter nH value = 370361000000.0
[Wed Aug  1 22:39:33 2012] Spectral fit parameter PhoIndex value = 1.24316
[Wed Aug  1 22:39:33 2012] Failed to get F(0.3-8.0) from xmm0105460301/analysis//spectral/fullrun_mos1_xmm0105460301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Aug  1 22:39:33 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 22:39:33 2012] Using Nh = 3.7e+11, photon index=1.24, rate=1.2, arf fullrun_mos1_xmm0105460301_pi300-10000_pass1_cl_src1.arf
[Wed Aug  1 22:39:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  1 22:39:33 2012] Updating source flux to 1.5e-11