[Fri Jul 20 02:29:22 2012] Detection parameters:
  Position = (346.1, 413.8) = 4 31 12.76 -61 27 17.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 184.2 +/- 21.7
  Background counts = 85.9
  Rate = 0.03 +/- 0.003

[Fri Jul 20 02:29:22 2012] Off-axis axis estimate = 9.05'
[Fri Jul 20 04:32:51 2012] Using EEF radius (= 10.95 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 04:32:51 2012] Initial guess for spatial extent in simple fitting = 10.95"
[Fri Jul 20 04:32:51 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.988
[Fri Jul 20 04:32:51 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.95"
[Fri Jul 20 05:35:28 2012] fullrun_mos2_xmm0105262501_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jul 20 05:35:28 2012] fullrun_mos2_xmm0105262501_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jul 20 05:35:28 2012] Fit fullrun_mos2_xmm0105262501_pi300-10000_cl_pass0_src3 appears to have run properly
[Fri Jul 20 05:35:29 2012] fullrun_mos2_xmm0105262501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jul 20 05:35:29 2012] fullrun_mos2_xmm0105262501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jul 20 05:35:29 2012] Fit fullrun_mos2_xmm0105262501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jul 20 05:35:44 2012] Spatial fit model total counts = 1264.020000, observed total counts = 1205.000000
[Fri Jul 20 05:35:44 2012] Offset between fit and detection position for source 3 = 3.190670 pixels
[Fri Jul 20 05:35:44 2012] 1141.306000 total counts/ 600.318000 bgd. counts: snr = 22.079892
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 3.190670 pixels
  Position = (348.5, 411.8) = 4 31 11.29 -61 27 28.1
  Extent = 21.9 (21.9-43.8)", rotation angle = 0
  Source counts = 541.0 +/- 33.8
  Background counts = 600.3
  Rate = 0.05 +/- 0.003
[Fri Jul 20 05:35:44 2012] Source 3 is offset by 1.170552 and -2.849476 pixels which is larger than
2 X fitted extent = 1.240667 x 1.240667, not incorporating fit results
[Fri Jul 20 05:35:44 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 05:35:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 05:35:44 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 05:35:44 2012] Source does appear to be extended
[Fri Jul 20 05:35:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 05:35:44 2012] Source is confused with source 5
[Fri Jul 20 05:35:44 2012] Source is confused with source 4
[Fri Jul 20 05:35:44 2012] Source is confused with source 15
[Fri Jul 20 05:35:44 2012] Source is confused with source 9
[Fri Jul 20 05:35:44 2012] Source is confused with source 13
[Fri Jul 20 05:35:44 2012] Source is confused with source 17
[Fri Jul 20 07:43:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 07:43:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 20 07:43:09 2012] Initial guess for spatial extent in simple fitting = 21.91"
[Fri Jul 20 07:43:09 2012] source mask rpix=5.0, npix_max = 122, mask sum = 93, frac = 0.758
[Fri Jul 20 07:43:09 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 21.91"
[Fri Jul 20 08:54:01 2012] fullrun_mos2_xmm0105262501_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jul 20 08:54:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105262501_pi300-10000_cl_pass1_src3.csv
[Fri Jul 20 08:54:01 2012] fullrun_mos2_xmm0105262501_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jul 20 08:54:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105262501_pi300-10000_cl_pass1_src3.csv
[Fri Jul 20 08:54:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105262501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105262501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 08:54:01 2012] fullrun_mos2_xmm0105262501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jul 20 08:54:01 2012] fullrun_mos2_xmm0105262501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jul 20 08:54:01 2012] Fit fullrun_mos2_xmm0105262501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jul 20 08:54:15 2012] Warning, spatial fit 3 centroid is now closest to src. 7
[Fri Jul 20 08:54:15 2012] Source 3 is offset by 3.212092 and -2.967586 pixels which is larger than
2 X fitted extent = 1.284552 x 1.284552, not incorporating fit results
[Fri Jul 20 08:54:15 2012] Spatial fit model total counts = 1107.910000, observed total counts = 1006.000000
[Fri Jul 20 08:54:15 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 20 08:54:15 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 08:54:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 08:54:15 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 08:54:15 2012] Source does appear to be extended
[Fri Jul 20 08:54:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 09:45:07 2012] XMMSAS src. selection expression = ellipse(30270.000000, 35774.272000, 1314.528038, 1314.528038, 0.000000, X, Y)
[Fri Jul 20 09:45:07 2012] Writing source region out to fullrun_mos2_xmm0105262501_pi300-10000_pass1_cl_src3_src.reg
[Fri Jul 20 09:45:07 2012] Extracting stamp from image fullrun_mos2_xmm0105262501_pi300-10000_cl_sm2.00.img.gz, (273, 336) - (424, 487)
[Fri Jul 20 09:45:07 2012] XMMSAS bgd. selection expression = annulus(30270.000000, 35774.272000, 2190.880063, 4381.760126, X, Y) && !ellipse(29534.086000, 36493.316000, 3577.424103, 3577.424103, 0.000000, X, Y) && !ellipse(29352.428894, 35800.053375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29107.260834, 36852.129974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29747.864400, 34909.674000, 2672.424077, 2672.424077, 0.000000, X, Y) && !ellipse(28500.978800, 37366.006000, 1749.016050, 1749.016050, 0.000000, X, Y) && !ellipse(28606.633820, 36381.674713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29437.817291, 37403.152100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29208.497101, 34811.917847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30448.340027, 36744.842896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30561.635437, 35159.360291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29060.091583, 39577.615784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30655.304871, 34520.695648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28874.035095, 35552.562164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29885.169120, 33638.850000, 1635.512047, 1635.512047, 0.000000, X, Y)
[Fri Jul 20 09:45:07 2012] Writing fullrun_mos2_xmm0105262501_pi300-10000_pass1_cl_src3.gif
[Fri Jul 20 09:46:01 2012] Mean detx,y = (-5353.86, 6875.95) 
[Fri Jul 20 09:46:02 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 09:46:34 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 09:46:34 2012] Setting source spectrum file to fullrun_mos2_xmm0105262501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jul 20 09:46:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0105262501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jul 20 10:27:56 2012] Updating aperture counts using extracted products
[Fri Jul 20 10:27:56 2012] Error reading totcts from fullrun_mos2_xmm0105262501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jul 20 10:27:56 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 10:27:56 2012] Using photon index=1.80, rate=0.0512, arf fullrun_mos2_xmm0105262501_pi300-10000_pass1_cl_src3.arf
[Fri Jul 20 10:27:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 10:27:57 2012] Updating source flux to 1.1e-12
[Fri Jul 20 10:28:59 2012] Flag b found in src. 3 procflags, skipping spectral fitting
[Fri Jul 20 10:28:59 2012] Flag p found in src. 3 procflags, skipping spectral fitting
[Fri Jul 20 10:28:59 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Fri Jul 20 10:30:25 2012] Reading fit data from xmm0105262501/analysis//spectral/fullrun_mos2_xmm0105262501_pi300-10000_pass1_cl_src3_pl.csv
[Fri Jul 20 10:30:25 2012] Spectral fit parameter nH value = 4.02289e+20
[Fri Jul 20 10:30:25 2012] Spectral fit parameter PhoIndex value = 1.69058
[Fri Jul 20 10:30:25 2012] Failed to get F(0.3-8.0) from xmm0105262501/analysis//spectral/fullrun_mos2_xmm0105262501_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Fri Jul 20 10:30:25 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 10:30:25 2012] Using Nh = 4e+20, photon index=1.69, rate=0.0512, arf fullrun_mos2_xmm0105262501_pi300-10000_pass1_cl_src3.arf
[Fri Jul 20 10:30:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 10:30:25 2012] Updating source flux to 1.2e-12