[Fri Jul 20 02:29:05 2012] Detection parameters:
  Position = (342.8, 416.0) = 4 31 14.74 -61 27 9.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 261.4 +/- 25.3
  Background counts = 92.3
  Rate = 0.03 +/- 0.003

[Fri Jul 20 02:29:05 2012] Off-axis axis estimate = 9.11'
[Fri Jul 20 03:51:19 2012] Using EEF radius (= 10.98 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 03:51:19 2012] Initial guess for spatial extent in simple fitting = 10.98"
[Fri Jul 20 03:51:19 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.984
[Fri Jul 20 03:51:19 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.98"
[Fri Jul 20 04:32:51 2012] fullrun_mos1_xmm0105262501_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jul 20 04:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105262501_pi300-10000_cl_pass0_src3.csv
[Fri Jul 20 04:32:51 2012] fullrun_mos1_xmm0105262501_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jul 20 04:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105262501_pi300-10000_cl_pass0_src3.csv
[Fri Jul 20 04:32:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105262501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105262501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 04:32:51 2012] fullrun_mos1_xmm0105262501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jul 20 04:32:51 2012] fullrun_mos1_xmm0105262501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jul 20 04:32:51 2012] Fit fullrun_mos1_xmm0105262501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jul 20 05:35:40 2012] Spatial fit model total counts = 1644.860000, observed total counts = 1629.000000
[Fri Jul 20 05:35:40 2012] Offset between fit and detection position for source 3 = 4.770420 pixels
[Fri Jul 20 05:35:40 2012] 1623.929000 total counts/ 906.293000 bgd. counts: snr = 23.838005
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 4.770420 pixels
  Position = (345.4, 412.0) = 4 31 13.16 -61 27 27.1
  Extent = 22.0 (22.0-22.0)", rotation angle = 0
  Source counts = 717.6 +/- 40.3
  Background counts = 906.3
  Rate = 0.07 +/- 0.004
[Fri Jul 20 05:35:40 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 05:35:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 05:35:40 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 05:35:40 2012] Source does appear to be extended
[Fri Jul 20 05:35:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 05:35:40 2012] Source is confused with source 5
[Fri Jul 20 05:35:40 2012] Source is confused with source 16
[Fri Jul 20 05:35:40 2012] Source is confused with source 15
[Fri Jul 20 06:56:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 06:56:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 20 06:56:27 2012] Initial guess for spatial extent in simple fitting = 21.97"
[Fri Jul 20 06:56:27 2012] source mask rpix=5.0, npix_max = 123, mask sum = 103, frac = 0.836
[Fri Jul 20 06:56:27 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 21.97"
[Fri Jul 20 07:43:08 2012] fullrun_mos1_xmm0105262501_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jul 20 07:43:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105262501_pi300-10000_cl_pass1_src3.csv
[Fri Jul 20 07:43:08 2012] fullrun_mos1_xmm0105262501_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jul 20 07:43:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105262501_pi300-10000_cl_pass1_src3.csv
[Fri Jul 20 07:43:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105262501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105262501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 07:43:08 2012] fullrun_mos1_xmm0105262501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jul 20 07:43:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105262501_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jul 20 07:43:08 2012] fullrun_mos1_xmm0105262501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jul 20 07:43:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105262501_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jul 20 07:43:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105262501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105262501_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 08:54:11 2012] Warning, spatial fit 3 centroid is now closest to src. 12
[Fri Jul 20 08:54:11 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 08:54:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 08:54:11 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 08:54:11 2012] Source does appear to be extended
[Fri Jul 20 08:54:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 09:28:10 2012] XMMSAS src. selection expression = ellipse(30001.976000, 35793.386000, 1317.924038, 1317.924038, 0.000000, X, Y)
[Fri Jul 20 09:28:10 2012] Writing source region out to fullrun_mos1_xmm0105262501_pi300-10000_pass1_cl_src3_src.reg
[Fri Jul 20 09:28:10 2012] Extracting stamp from image fullrun_mos1_xmm0105262501_pi300-10000_cl_sm2.00.img.gz, (270, 336) - (421, 488)
[Fri Jul 20 09:28:10 2012] XMMSAS bgd. selection expression = annulus(30001.976000, 35793.386000, 2196.540063, 4393.080126, X, Y) && !ellipse(28158.244507, 36505.773438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29126.045166, 35878.828094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30000.494995, 34761.512115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29099.959503, 39583.047974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29341.853912, 34579.507202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30470.849365, 35009.255554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28901.222595, 37623.981506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28309.830800, 38210.668000, 1415.200041, 1415.200041, 0.000000, X, Y)
[Fri Jul 20 09:28:10 2012] Writing fullrun_mos1_xmm0105262501_pi300-10000_pass1_cl_src3.gif
[Fri Jul 20 09:28:43 2012] Mean detx,y = (7141.10, 4960.87) 
[Fri Jul 20 09:28:44 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 09:29:36 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 09:29:36 2012] Setting source spectrum file to fullrun_mos1_xmm0105262501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jul 20 09:29:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0105262501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jul 20 10:27:54 2012] Updating aperture counts using extracted products
[Fri Jul 20 10:27:54 2012] Error reading totcts from fullrun_mos1_xmm0105262501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jul 20 10:27:55 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 10:27:55 2012] Using photon index=1.80, rate=0.0688, arf fullrun_mos1_xmm0105262501_pi300-10000_pass1_cl_src3.arf
[Fri Jul 20 10:27:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 10:27:55 2012] Updating source flux to 8.6e-13
[Fri Jul 20 10:27:59 2012] Flag c found in src. 3 procflags, skipping spectral fitting