[Sun Jul 22 21:41:44 2012] Detection parameters:
  Position = (434.4, 295.9) = 4 31 9.55 -61 27 33.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.5 +/- 14.2
  Background counts = 34.8
  Rate = 0.009 +/- 0.002

[Sun Jul 22 21:41:45 2012] Off-axis axis estimate = 9.86'
[Sun Jul 22 22:46:19 2012] Using EEF radius (= 11.36 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 22:46:19 2012] Initial guess for spatial extent in simple fitting = 11.36"
[Sun Jul 22 22:46:19 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.085
[Sun Jul 22 22:46:19 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 11.36"
[Sun Jul 22 23:53:30 2012] fullrun_mos1_xmm0105262101_pi300-10000_cl_pass0_src9.ximg exists
[Sun Jul 22 23:53:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105262101_pi300-10000_cl_pass0_src9.csv
[Sun Jul 22 23:53:30 2012] fullrun_mos1_xmm0105262101_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Jul 22 23:53:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105262101_pi300-10000_cl_pass0_src9.csv
[Sun Jul 22 23:53:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105262101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105262101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 23:53:30 2012] fullrun_mos1_xmm0105262101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Jul 22 23:53:30 2012] fullrun_mos1_xmm0105262101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Jul 22 23:53:30 2012] Fit fullrun_mos1_xmm0105262101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Mon Jul 23 01:19:51 2012] Warning, spatial fit 9 centroid is now closest to src. 14
[Mon Jul 23 01:19:51 2012] Source 4 is offset by -2.766549 and -6.532468 pixels which is larger than
2 X fitted extent = 1.286143 x 1.286143, not incorporating fit results
[Mon Jul 23 01:19:51 2012] Source 4 is offset by -4.858894 and 3.812612 pixels which is larger than
2 X fitted extent = 1.291200 x 1.291200, not incorporating fit results
[Mon Jul 23 01:19:51 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 01:19:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 01:19:51 2012] Assessing source extent using major
[Mon Jul 23 01:19:51 2012] Source does appear to be extended
[Mon Jul 23 01:19:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 02:17:22 2012] Using EEF radius (= 11.36 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 02:17:22 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 23 02:17:22 2012] Initial guess for spatial extent in simple fitting = 11.36"
[Mon Jul 23 02:17:22 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.085
[Mon Jul 23 02:17:22 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 11.36"
[Mon Jul 23 03:34:38 2012] fullrun_mos1_xmm0105262101_pi300-10000_cl_pass1_src6.ximg exists
[Mon Jul 23 03:34:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105262101_pi300-10000_cl_pass1_src6.csv
[Mon Jul 23 03:34:38 2012] fullrun_mos1_xmm0105262101_pi300-10000_cl_pass1_src6_1.ximg exists
[Mon Jul 23 03:34:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105262101_pi300-10000_cl_pass1_src6.csv
[Mon Jul 23 03:34:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105262101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105262101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 03:34:38 2012] fullrun_mos1_xmm0105262101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Mon Jul 23 03:34:38 2012] fullrun_mos1_xmm0105262101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Mon Jul 23 03:34:38 2012] Fit fullrun_mos1_xmm0105262101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Mon Jul 23 04:56:32 2012] Warning, spatial fit 6 centroid is now closest to src. 19
[Mon Jul 23 04:56:32 2012] Source 4 is offset by 2.605014 and -1.443572 pixels which is larger than
2 X fitted extent = 1.261306 x 1.261306, not incorporating fit results
[Mon Jul 23 04:56:32 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 04:56:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 04:56:32 2012] Assessing source extent using major
[Mon Jul 23 04:56:32 2012] Source does appear to be extended
[Mon Jul 23 04:56:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 05:15:19 2012] XMMSAS src. selection expression = ellipse(37747.772247, 25691.345276, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 23 05:15:19 2012] Writing source region out to fullrun_mos1_xmm0105262101_pi300-10000_pass1_cl_src4_src.reg
[Mon Jul 23 05:15:19 2012] Extracting stamp from image fullrun_mos1_xmm0105262101_pi300-10000_cl_sm2.00.img.gz, (397, 258) - (472, 333)
[Mon Jul 23 05:15:19 2012] XMMSAS bgd. selection expression = annulus(37747.772247, 25691.345276, 1087.500000, 2175.000000, X, Y) && !ellipse(35998.649567, 26130.136658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37045.607269, 25609.652679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37327.449249, 24753.769470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36175.230255, 27562.323181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35823.027344, 26995.084137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36652.907196, 26566.907562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35731.588000, 28478.154000, 1721.312050, 1721.312050, 0.000000, X, Y) && !ellipse(34917.327820, 26556.813141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35216.361115, 25929.278381, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 23 05:15:19 2012] Writing fullrun_mos1_xmm0105262101_pi300-10000_pass1_cl_src4.gif
[Mon Jul 23 05:16:27 2012] Mean detx,y = (2777.27, -12353.44) 
[Mon Jul 23 05:16:28 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 05:16:36 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 05:16:37 2012] Setting source spectrum file to fullrun_mos1_xmm0105262101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Jul 23 05:16:37 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0105262101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon Jul 23 05:27:23 2012] Not generating rmf since there are only 77 counts
[Mon Jul 23 05:27:23 2012] rmf not generated due to insufficient counts
[Mon Jul 23 06:02:17 2012] Updating aperture counts using extracted products
[Mon Jul 23 06:02:17 2012] Error reading totcts from fullrun_mos1_xmm0105262101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Jul 23 06:02:17 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 06:02:17 2012] Using photon index=1.80, rate=0.00871, arf fullrun_mos1_xmm0105262101_pi300-10000_pass1_cl_src4.arf
[Mon Jul 23 06:02:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 06:02:17 2012] Updating source flux to 2.1e-13
[Mon Jul 23 06:02:18 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting