[Sun Jun 23 00:39:55 2013] Detection parameters:
  Position = (366.4, 181.8) = 4 30 52.42 -61 40 49.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.4 +/- 11.5
  Background counts = 9.7
  Rate = 0.02 +/- 0.002

[Sun Jun 23 00:39:56 2013] Off-axis axis estimate = 9.79'
[Sun Jun 23 00:40:28 2013] Using EEF radius (= 11.32 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 00:40:28 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 23 00:40:28 2013] Initial guess for spatial extent in simple fitting = 11.32"
[Sun Jun 23 00:40:28 2013] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.091
[Sun Jun 23 00:40:28 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 11.32"
[Sun Jun 23 00:40:33 2013] fullrun_pn_xmm0105262001_pi300-10000_cl_pass0_src18.ximg exists
[Sun Jun 23 00:40:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105262001_pi300-10000_cl_pass0_src18.csv
[Sun Jun 23 00:40:33 2013] fullrun_pn_xmm0105262001_pi300-10000_cl_pass0_src18_1.ximg exists
[Sun Jun 23 00:40:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105262001_pi300-10000_cl_pass0_src18.csv
[Sun Jun 23 00:40:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105262001_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105262001_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 00:40:34 2013] fullrun_pn_xmm0105262001_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sun Jun 23 00:40:34 2013] fullrun_pn_xmm0105262001_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sun Jun 23 00:40:34 2013] Fit fullrun_pn_xmm0105262001_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Sun Jun 23 00:40:56 2013] Spatial fit model total counts = 161.454000, observed total counts = 156.000000
[Sun Jun 23 00:40:56 2013] Offset between fit and detection position for source 19 = 0.455079 pixels
[Sun Jun 23 00:40:56 2013] 163.041800 total counts/ 103.172000 bgd. counts: snr = 5.894227
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.455079 pixels
  Position = (366.1, 181.5) = 4 30 52.61 -61 40 50.5
  Extent = 6.6 (5.1-8.3)", rotation angle = 0
  Source counts = 59.9 +/- 12.8
  Background counts = 103.2
  Rate = 0.01 +/- 0.003
[Sun Jun 23 00:40:56 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 00:40:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 00:40:56 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 00:40:56 2013] Source does appear to be extended
[Sun Jun 23 00:40:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 00:41:30 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 23 00:41:30 2013] Initial guess for spatial extent in simple fitting = 6.60"
[Sun Jun 23 00:41:30 2013] source mask rpix=1.5, npix_max = 16, mask sum = 20, frac = 1.230
[Sun Jun 23 00:41:30 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 6.60"
[Sun Jun 23 00:41:31 2013] fullrun_pn_xmm0105262001_pi300-10000_cl_pass1_src14.ximg exists
[Sun Jun 23 00:41:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105262001_pi300-10000_cl_pass1_src14.csv
[Sun Jun 23 00:41:31 2013] fullrun_pn_xmm0105262001_pi300-10000_cl_pass1_src14_1.ximg exists
[Sun Jun 23 00:41:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105262001_pi300-10000_cl_pass1_src14.csv
[Sun Jun 23 00:41:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105262001_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105262001_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 00:41:32 2013] fullrun_pn_xmm0105262001_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sun Jun 23 00:41:32 2013] fullrun_pn_xmm0105262001_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sun Jun 23 00:41:32 2013] Fit fullrun_pn_xmm0105262001_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Sun Jun 23 00:41:44 2013] Warning, spatial fit 14 centroid is now closest to src. 26
[Sun Jun 23 00:41:44 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 00:41:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 00:41:44 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 00:41:44 2013] Source does appear to be extended
[Sun Jun 23 00:41:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 00:42:11 2013] XMMSAS src. selection expression = ellipse(31802.487400, 15743.259600, 395.813350, 395.813350, 0.000000, X, Y)
[Sun Jun 23 00:42:11 2013] Not overwriting source region fullrun_pn_xmm0105262001_pi300-10000_pass1_cl_src19_src.reg
[Sun Jun 23 00:42:11 2013] Extracting stamp from image fullrun_pn_xmm0105262001_pi300-10000_cl_sm2.00.img.gz, (343, 159) - (389, 204)
[Sun Jun 23 00:42:11 2013] XMMSAS bgd. selection expression = annulus(31802.487400, 15743.259600, 659.688917, 1319.377835, X, Y)
[Sun Jun 23 00:42:11 2013] Writing fullrun_pn_xmm0105262001_pi300-10000_pass1_cl_src19.gif
[Sun Jun 23 00:42:13 2013] ../../xmm0105262001/products/events/fullrun_pn_xmm0105262001_pi300-10000_pass1_cl_src19_src.evt and ../../xmm0105262001/products/events/fullrun_pn_xmm0105262001_pi300-10000_pass1_cl_src19_bgd.evt exist, delete to re-create
[Sun Jun 23 00:42:13 2013] Mean detx,y = (-2987.56, -10116.76) 
[Sun Jun 23 00:42:13 2013] ../../xmm0105262001/products/images/fullrun_pn_xmm0105262001_pi300-10000_pass1_cl_src19_src.img and ../../xmm0105262001/products/images/fullrun_pn_xmm0105262001_pi300-10000_pass1_cl_src19_bgd.img exist, delete to re-create
[Sun Jun 23 00:42:13 2013] ../../xmm0105262001/products/spectra/fullrun_pn_xmm0105262001_pi300-10000_pass1_cl_src19_src_b10.pi.gz and ../../xmm0105262001/products/spectra/fullrun_pn_xmm0105262001_pi300-10000_pass1_cl_src19_bgd.pi exist, delete to re-create
[Sun Jun 23 00:42:13 2013] Setting source spectrum file to fullrun_pn_xmm0105262001_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sun Jun 23 00:42:13 2013] Setting bgd. spectrum file to fullrun_pn_xmm0105262001_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sun Jun 23 00:42:13 2013] ../../xmm0105262001/products/lightcurves/fullrun_pn_xmm0105262001_pi300-10000_pass1_cl_src19_src.lc and ../../xmm0105262001/products/lightcurves/fullrun_pn_xmm0105262001_pi300-10000_pass1_cl_src19_bgd.lc exist, delete to re-create
[Sun Jun 23 01:22:55 2013] Not generating rmf since there are only 59 counts
[Sun Jun 23 01:22:55 2013] rmf not generated due to insufficient counts
[Sun Jun 23 02:48:41 2013] Updating aperture counts using extracted products
[Sun Jun 23 02:48:41 2013] Total counts from fullrun_pn_xmm0105262001_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 85.00
[Sun Jun 23 02:48:41 2013] Total counts from fullrun_pn_xmm0105262001_pi300-10000_pass1_cl_src19_bgd.pi.gz = 178.00
[Sun Jun 23 02:48:41 2013] Got source and background scale factors 491200.000000, 3692958.000000
[Sun Jun 23 02:48:41 2013] User source parameters:
  Position = (366.1, 181.5) = 4 30 52.61 -61 40 50.5
  Extent = 6.6 (5.1-8.3)", rotation angle = 0
  Source aperture counts = 61.3 +/- 10.3
  Background aperture counts = 23.7
  Rate = 0.01 +/- 0.002

[Sun Jun 23 02:48:44 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 02:48:44 2013] Using photon index=1.80, rate=0.013, arf fullrun_pn_xmm0105262001_pi300-10000_pass1_cl_src19.arf
[Sun Jun 23 02:48:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 02:48:44 2013] Updating source flux to 7.6e-14
[Sun Jun 23 02:49:13 2013] Source 19 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 23 02:49:29 2013] xmm0105262001/analysis//spectral/fullrun_pn_xmm0105262001_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete