[Sun Jun 23 00:40:00 2013] Detection parameters:
  Position = (325.3, 364.8) = 4 31 17.69 -61 27 31.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.6 +/- 15.6
  Background counts = 53.5
  Rate = 0.01 +/- 0.003

[Sun Jun 23 00:40:00 2013] Off-axis axis estimate = 5.19'
[Sun Jun 23 00:40:39 2013] Using EEF radius (= 9.02 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 00:40:39 2013] Initial guess for spatial extent in simple fitting = 9.02"
[Sun Jun 23 00:40:39 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.943
[Sun Jun 23 00:40:39 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 9.02"
[Sun Jun 23 00:40:42 2013] fullrun_mos2_xmm0105262001_pi300-10000_cl_pass0_src11.ximg exists
[Sun Jun 23 00:40:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105262001_pi300-10000_cl_pass0_src11.csv
[Sun Jun 23 00:40:42 2013] fullrun_mos2_xmm0105262001_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Jun 23 00:40:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105262001_pi300-10000_cl_pass0_src11.csv
[Sun Jun 23 00:40:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105262001_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105262001_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 00:40:42 2013] fullrun_mos2_xmm0105262001_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Jun 23 00:40:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105262001_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sun Jun 23 00:40:42 2013] fullrun_mos2_xmm0105262001_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Jun 23 00:40:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105262001_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sun Jun 23 00:40:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105262001_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105262001_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 00:41:15 2013] Warning, spatial fit 11 centroid is now closest to src. 16
[Sun Jun 23 00:41:15 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 00:41:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 00:41:15 2013] Assessing source extent using major
[Sun Jun 23 00:41:15 2013] Source does appear to be extended
[Sun Jun 23 00:41:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 00:41:15 2013] Source is confused with source 15
[Sun Jun 23 00:41:34 2013] Using EEF radius (= 9.02 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 00:41:34 2013] Initial guess for spatial extent in simple fitting = 9.02"
[Sun Jun 23 00:41:34 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.943
[Sun Jun 23 00:41:34 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 9.02"
[Sun Jun 23 00:41:35 2013] fullrun_mos2_xmm0105262001_pi300-10000_cl_pass1_src11.ximg exists
[Sun Jun 23 00:41:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105262001_pi300-10000_cl_pass1_src11.csv
[Sun Jun 23 00:41:35 2013] fullrun_mos2_xmm0105262001_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun Jun 23 00:41:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105262001_pi300-10000_cl_pass1_src11.csv
[Sun Jun 23 00:41:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105262001_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105262001_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 00:41:36 2013] fullrun_mos2_xmm0105262001_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun Jun 23 00:41:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105262001_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sun Jun 23 00:41:36 2013] fullrun_mos2_xmm0105262001_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Jun 23 00:41:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105262001_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sun Jun 23 00:41:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105262001_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105262001_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 00:41:57 2013] Warning, spatial fit 11 centroid is now closest to src. 15
[Sun Jun 23 00:41:57 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 00:41:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 00:41:57 2013] Assessing source extent using major
[Sun Jun 23 00:41:57 2013] Source does appear to be extended
[Sun Jun 23 00:41:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 02:05:33 2013] XMMSAS src. selection expression = ellipse(28249.856293, 31691.517670, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 02:05:33 2013] Writing source region out to fullrun_mos2_xmm0105262001_pi300-10000_pass1_cl_src13_src.reg
[Sun Jun 23 02:05:33 2013] Extracting stamp from image fullrun_mos2_xmm0105262001_pi300-10000_cl_sm2.00.img.gz, (288, 327) - (363, 402)
[Sun Jun 23 02:05:33 2013] XMMSAS bgd. selection expression = annulus(28249.856293, 31691.517670, 1087.500000, 2175.000000, X, Y) && !ellipse(29080.267151, 32055.827515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28431.234000, 31952.396000, 1434.984041, 1434.984041, 0.000000, X, Y) && !ellipse(27946.402000, 33168.236600, 1529.688044, 1529.688044, 0.000000, X, Y) && !ellipse(27891.557434, 32502.647705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28791.038000, 31387.526000, 2858.848082, 2858.848082, 0.000000, X, Y) && !ellipse(27903.831635, 31374.209808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28331.086914, 32676.852142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28994.299957, 32811.337341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29229.062400, 30745.238000, 1429.728041, 1429.728041, 0.000000, X, Y) && !ellipse(27319.974762, 32264.305725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29349.264099, 31518.051331, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 02:05:33 2013] Writing fullrun_mos2_xmm0105262001_pi300-10000_pass1_cl_src13.gif
[Sun Jun 23 02:11:53 2013] Mean detx,y = (5372.48, -6161.64) 
[Sun Jun 23 02:11:55 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 02:12:08 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 02:12:08 2013] Setting source spectrum file to fullrun_mos2_xmm0105262001_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sun Jun 23 02:12:08 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0105262001_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sun Jun 23 02:42:03 2013] Not generating rmf since there are only 83 counts
[Sun Jun 23 02:42:03 2013] rmf not generated due to insufficient counts
[Sun Jun 23 02:48:52 2013] Updating aperture counts using extracted products
[Sun Jun 23 02:48:52 2013] Total counts from fullrun_mos2_xmm0105262001_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 727.00
[Sun Jun 23 02:48:52 2013] Total counts from fullrun_mos2_xmm0105262001_pi300-10000_pass1_cl_src13_bgd.pi.gz = 0.00
[Sun Jun 23 02:48:52 2013] Got source and background scale factors 1134024.000000, 0.000000
[Sun Jun 23 02:48:52 2013] Background scale factor is not positive, halting re-assessment of this source
[Sun Jun 23 02:48:54 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 02:48:54 2013] Using photon index=1.80, rate=0.0148, arf fullrun_mos2_xmm0105262001_pi300-10000_pass1_cl_src13.arf
[Sun Jun 23 02:48:54 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 02:48:54 2013] Updating source flux to 2.4e-13
[Sun Jun 23 02:49:04 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 02:49:13 2013] xmm0105262001/analysis//spectral/fullrun_mos2_xmm0105262001_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete