[Sun Jun 23 00:39:57 2013] Detection parameters:
  Position = (336.2, 361.8) = 4 31 11.03 -61 27 45.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.9 +/- 15.1
  Background counts = 41.4
  Rate = 0.02 +/- 0.003

[Sun Jun 23 00:39:58 2013] Off-axis axis estimate = 5.35'
[Sun Jun 23 00:40:34 2013] Using EEF radius (= 9.10 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 00:40:34 2013] Initial guess for spatial extent in simple fitting = 9.10"
[Sun Jun 23 00:40:34 2013] source mask rpix=2.1, npix_max = 26, mask sum = 24, frac = 0.893
[Sun Jun 23 00:40:34 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 9.10"
[Sun Jun 23 00:40:36 2013] fullrun_mos1_xmm0105262001_pi300-10000_cl_pass0_src4.ximg exists
[Sun Jun 23 00:40:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105262001_pi300-10000_cl_pass0_src4.csv
[Sun Jun 23 00:40:37 2013] fullrun_mos1_xmm0105262001_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Jun 23 00:40:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105262001_pi300-10000_cl_pass0_src4.csv
[Sun Jun 23 00:40:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105262001_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105262001_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 00:40:38 2013] fullrun_mos1_xmm0105262001_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Jun 23 00:40:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105262001_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Jun 23 00:40:38 2013] fullrun_mos1_xmm0105262001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Jun 23 00:40:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105262001_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Jun 23 00:40:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105262001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105262001_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 00:41:08 2013] Warning, spatial fit 4 centroid is now closest to src. 6
[Sun Jun 23 00:41:08 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 00:41:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 00:41:08 2013] Assessing source extent using major
[Sun Jun 23 00:41:08 2013] Source does appear to be extended
[Sun Jun 23 00:41:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 00:41:08 2013] Source is confused with source 6
[Sun Jun 23 00:41:32 2013] Using EEF radius (= 9.10 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 00:41:32 2013] Initial guess for spatial extent in simple fitting = 9.10"
[Sun Jun 23 00:41:32 2013] source mask rpix=2.1, npix_max = 26, mask sum = 24, frac = 0.893
[Sun Jun 23 00:41:32 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 9.10"
[Sun Jun 23 00:41:33 2013] fullrun_mos1_xmm0105262001_pi300-10000_cl_pass1_src4.ximg exists
[Sun Jun 23 00:41:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105262001_pi300-10000_cl_pass1_src4.csv
[Sun Jun 23 00:41:33 2013] fullrun_mos1_xmm0105262001_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun Jun 23 00:41:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105262001_pi300-10000_cl_pass1_src4.csv
[Sun Jun 23 00:41:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105262001_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105262001_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 00:41:34 2013] fullrun_mos1_xmm0105262001_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun Jun 23 00:41:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105262001_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun Jun 23 00:41:34 2013] fullrun_mos1_xmm0105262001_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Jun 23 00:41:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105262001_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun Jun 23 00:41:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105262001_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105262001_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 00:41:51 2013] Warning, spatial fit 4 centroid is now closest to src. 14
[Sun Jun 23 00:41:51 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 00:41:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 00:41:51 2013] Assessing source extent using major
[Sun Jun 23 00:41:51 2013] Source does appear to be extended
[Sun Jun 23 00:41:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 01:30:40 2013] XMMSAS src. selection expression = ellipse(29204.599518, 31428.167969, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 01:30:40 2013] Writing source region out to fullrun_mos1_xmm0105262001_pi300-10000_pass1_cl_src5_src.reg
[Sun Jun 23 01:30:40 2013] Extracting stamp from image fullrun_mos1_xmm0105262001_pi300-10000_cl_sm2.00.img.gz, (299, 324) - (374, 399)
[Sun Jun 23 01:30:40 2013] XMMSAS bgd. selection expression = annulus(29204.599518, 31428.167969, 1087.500000, 2175.000000, X, Y) && !ellipse(28948.026800, 31845.596000, 1465.056042, 1465.056042, 0.000000, X, Y) && !ellipse(28533.076233, 32834.486542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28541.702423, 31267.188232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27133.692400, 33317.164000, 1443.856042, 1443.856042, 0.000000, X, Y) && !ellipse(27109.020000, 32328.228000, 1048.472030, 1048.472030, 0.000000, X, Y) && !ellipse(27309.396000, 33176.097600, 1508.264043, 1508.264043, 0.000000, X, Y) && !ellipse(28102.150000, 34490.376000, 1491.200043, 1491.200043, 0.000000, X, Y) && !ellipse(27765.416992, 31604.100830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27322.117000, 34026.021600, 745.650421, 745.650421, 0.000000, X, Y) && !ellipse(26563.410889, 32724.541779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28903.800000, 30461.054000, 1066.664031, 1066.664031, 0.000000, X, Y) && !ellipse(29615.733459, 32055.017731, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 01:30:40 2013] Writing fullrun_mos1_xmm0105262001_pi300-10000_pass1_cl_src5.gif
[Sun Jun 23 01:32:36 2013] Mean detx,y = (-5468.22, -6233.29) 
[Sun Jun 23 01:32:39 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 01:32:55 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 01:32:56 2013] Setting source spectrum file to fullrun_mos1_xmm0105262001_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jun 23 01:32:56 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0105262001_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Jun 23 01:49:28 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 01:49:28 2013] rmf not generated due to insufficient counts
[Sun Jun 23 02:48:45 2013] Updating aperture counts using extracted products
[Sun Jun 23 02:48:45 2013] Total counts from fullrun_mos1_xmm0105262001_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 597.00
[Sun Jun 23 02:48:45 2013] Total counts from fullrun_mos1_xmm0105262001_pi300-10000_pass1_cl_src5_bgd.pi.gz = 883.00
[Sun Jun 23 02:48:45 2013] Got source and background scale factors 1026036.000000, 4479186.000000
[Sun Jun 23 02:48:45 2013] User source parameters:
  Position = (336.2, 361.8) = 4 31 11.03 -61 27 45.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 394.7 +/- 25.4
  Background aperture counts = 202.3
  Rate = 0.05 +/- 0.003

[Sun Jun 23 02:48:45 2013] Updating counts from extracted products
[Sun Jun 23 02:48:45 2013] Set source signif. to 394.73/14.22 = 27.76
[Sun Jun 23 02:48:49 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 02:48:49 2013] Using photon index=1.80, rate=0.0468, arf fullrun_mos1_xmm0105262001_pi300-10000_pass1_cl_src5.arf
[Sun Jun 23 02:48:49 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 02:48:49 2013] Updating source flux to 9.1e-13
[Sun Jun 23 02:48:57 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 02:49:04 2013] xmm0105262001/analysis//spectral/fullrun_mos1_xmm0105262001_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete