[Sun Jun 23 00:39:57 2013] Detection parameters:
  Position = (312.1, 380.0) = 4 31 25.69 -61 26 27.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.3 +/- 14.6
  Background counts = 49.1
  Rate = 0.01 +/- 0.003

[Sun Jun 23 00:39:58 2013] Off-axis axis estimate = 6.00'
[Sun Jun 23 00:40:34 2013] Using EEF radius (= 9.43 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 00:40:34 2013] Initial guess for spatial extent in simple fitting = 9.43"
[Sun Jun 23 00:40:34 2013] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.265
[Sun Jun 23 00:40:34 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 9.43"
[Sun Jun 23 00:40:37 2013] fullrun_mos1_xmm0105262001_pi300-10000_cl_pass0_src15.ximg exists
[Sun Jun 23 00:40:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105262001_pi300-10000_cl_pass0_src15.csv
[Sun Jun 23 00:40:37 2013] fullrun_mos1_xmm0105262001_pi300-10000_cl_pass0_src15_1.ximg exists
[Sun Jun 23 00:40:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105262001_pi300-10000_cl_pass0_src15.csv
[Sun Jun 23 00:40:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105262001_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105262001_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 00:40:39 2013] fullrun_mos1_xmm0105262001_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sun Jun 23 00:40:39 2013] fullrun_mos1_xmm0105262001_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sun Jun 23 00:40:39 2013] Fit fullrun_mos1_xmm0105262001_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sun Jun 23 00:41:08 2013] Warning, spatial fit 15 centroid is now closest to src. 10
[Sun Jun 23 00:41:08 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 00:41:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 00:41:08 2013] Assessing source extent using major
[Sun Jun 23 00:41:08 2013] Source does appear to be extended
[Sun Jun 23 00:41:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 00:41:08 2013] Source is confused with source 10
[Sun Jun 23 00:41:32 2013] Using EEF radius (= 9.43 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 00:41:32 2013] Initial guess for spatial extent in simple fitting = 9.43"
[Sun Jun 23 00:41:32 2013] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.265
[Sun Jun 23 00:41:32 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 9.43"
[Sun Jun 23 00:41:33 2013] fullrun_mos1_xmm0105262001_pi300-10000_cl_pass1_src13.ximg exists
[Sun Jun 23 00:41:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105262001_pi300-10000_cl_pass1_src13.csv
[Sun Jun 23 00:41:33 2013] fullrun_mos1_xmm0105262001_pi300-10000_cl_pass1_src13_1.ximg exists
[Sun Jun 23 00:41:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105262001_pi300-10000_cl_pass1_src13.csv
[Sun Jun 23 00:41:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105262001_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105262001_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 00:41:34 2013] fullrun_mos1_xmm0105262001_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sun Jun 23 00:41:34 2013] fullrun_mos1_xmm0105262001_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sun Jun 23 00:41:34 2013] Fit fullrun_mos1_xmm0105262001_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sun Jun 23 00:41:51 2013] Spatial fit model total counts = 2038.110000, observed total counts = 2040.000000
[Sun Jun 23 00:41:51 2013] Offset between fit and detection position for source 13 = 2.076407 pixels
[Sun Jun 23 00:41:51 2013] Warning, changing simple spatial fit ID from 13 to 11
[Sun Jun 23 00:41:51 2013] 1929.460000 total counts/ 1806.810000 bgd. counts: snr = 2.885435
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 2.076407 pixels
  Position = (314.1, 380.4) = 4 31 24.46 -61 26 25.7
  Extent = 17.6 (8.6-36.1)", rotation angle = 0
  Source counts = 122.7 +/- 43.9
  Background counts = 1806.8
  Rate = 0.01 +/- 0.005
[Sun Jun 23 00:41:51 2013] Spatial fit model total counts = 912.111000, observed total counts = 913.000000
[Sun Jun 23 00:41:51 2013] Offset between fit and detection position for source 13 = 1.518286 pixels
[Sun Jun 23 00:41:51 2013] Warning, changing simple spatial fit ID from 11 to 13
[Sun Jun 23 00:41:51 2013] 831.864000 total counts/ 607.995000 bgd. counts: snr = 9.079124
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 1.518286 pixels
  Position = (314.5, 381.9) = 4 31 24.26 -61 26 19.2
  Extent = 18.9 (18.8-37.7)", rotation angle = 0
  Source counts = 223.9 +/- 28.8
  Background counts = 608.0
  Rate = 0.03 +/- 0.003
[Sun Jun 23 00:41:51 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 00:41:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 00:41:51 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 00:41:51 2013] Source does appear to be extended
[Sun Jun 23 00:41:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 01:30:40 2013] XMMSAS src. selection expression = ellipse(27309.396000, 33176.097600, 1131.198033, 1131.198033, 0.000000, X, Y)
[Sun Jun 23 01:30:40 2013] Writing source region out to fullrun_mos1_xmm0105262001_pi300-10000_pass1_cl_src13_src.reg
[Sun Jun 23 01:30:40 2013] Extracting stamp from image fullrun_mos1_xmm0105262001_pi300-10000_cl_sm2.00.img.gz, (249, 317) - (379, 447)
[Sun Jun 23 01:30:40 2013] XMMSAS bgd. selection expression = annulus(27309.396000, 33176.097600, 1885.330054, 3770.660108, X, Y) && !ellipse(28948.026800, 31845.596000, 1465.056042, 1465.056042, 0.000000, X, Y) && !ellipse(29204.599518, 31428.167969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28533.076233, 32834.486542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28541.702423, 31267.188232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27133.692400, 33317.164000, 1443.856042, 1443.856042, 0.000000, X, Y) && !ellipse(27109.020000, 32328.228000, 1048.472030, 1048.472030, 0.000000, X, Y) && !ellipse(28102.150000, 34490.376000, 1491.200043, 1491.200043, 0.000000, X, Y) && !ellipse(27765.416992, 31604.100830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27322.117000, 34026.021600, 745.650421, 745.650421, 0.000000, X, Y) && !ellipse(26563.410889, 32724.541779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28903.800000, 30461.054000, 1066.664031, 1066.664031, 0.000000, X, Y) && !ellipse(29615.733459, 32055.017731, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 01:30:40 2013] Writing fullrun_mos1_xmm0105262001_pi300-10000_pass1_cl_src13.gif
[Sun Jun 23 01:35:06 2013] Mean detx,y = (-7672.69, -5184.08) 
[Sun Jun 23 01:35:09 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 01:35:42 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 01:35:42 2013] Setting source spectrum file to fullrun_mos1_xmm0105262001_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sun Jun 23 01:35:42 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0105262001_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sun Jun 23 02:48:47 2013] Updating aperture counts using extracted products
[Sun Jun 23 02:48:47 2013] Total counts from fullrun_mos1_xmm0105262001_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 1848.00
[Sun Jun 23 02:48:47 2013] Total counts from fullrun_mos1_xmm0105262001_pi300-10000_pass1_cl_src13_bgd.pi.gz = 5277.00
[Sun Jun 23 02:48:47 2013] Got source and background scale factors 3895740.000000, 22919919.000000
[Sun Jun 23 02:48:47 2013] User source parameters:
  Position = (314.5, 381.9) = 4 31 24.26 -61 26 19.2
  Extent = 18.9 (18.8-37.7)", rotation angle = 0
  Source aperture counts = 951.1 +/- 44.0
  Background aperture counts = 896.9
  Rate = 0.1 +/- 0.005

[Sun Jun 23 02:48:49 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 02:48:49 2013] Using photon index=1.80, rate=0.0266, arf fullrun_mos1_xmm0105262001_pi300-10000_pass1_cl_src13.arf
[Sun Jun 23 02:48:49 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 02:48:49 2013] Updating source flux to 4.1e-13
[Sun Jun 23 02:48:57 2013] Flag c found in src. 13 procflags, skipping spectral fitting
[Sun Jun 23 02:49:04 2013] xmm0105262001/analysis//spectral/fullrun_mos1_xmm0105262001_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete