[Tue Jun 26 10:23:29 2012] Detection parameters:
  Position = (410.7, 213.9) = 13 33 40.31 -31 48 50.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.2 +/- 16.6
  Background counts = 62.9
  Rate = 0.006 +/- 0.0009

[Tue Jun 26 10:23:29 2012] Off-axis axis estimate = 10.19'
[Tue Jun 26 10:27:30 2012] Using EEF radius (= 11.52 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 10:27:30 2012] Initial guess for spatial extent in simple fitting = 11.52"
[Tue Jun 26 10:27:30 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.908
[Tue Jun 26 10:27:30 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 11.52"
[Tue Jun 26 11:39:52 2012] fullrun_pn_xmm0105261801_pi300-10000_cl_pass0_src21.ximg exists
[Tue Jun 26 11:39:52 2012] fullrun_pn_xmm0105261801_pi300-10000_cl_pass0_src21_1.ximg exists
[Tue Jun 26 11:39:52 2012] Fit fullrun_pn_xmm0105261801_pi300-10000_cl_pass0_src21 appears to have run properly
[Tue Jun 26 11:39:52 2012] fullrun_pn_xmm0105261801_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Tue Jun 26 11:39:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261801_pi300-10000_cl_pass0_tfrozen_src21.csv
[Tue Jun 26 11:39:52 2012] fullrun_pn_xmm0105261801_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Tue Jun 26 11:39:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261801_pi300-10000_cl_pass0_tfrozen_src21.csv
[Tue Jun 26 11:39:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105261801_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105261801_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 13:34:11 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 14.201281 pixels away
[Tue Jun 26 13:34:11 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 13:34:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 13:34:11 2012] Assessing source extent using major
[Tue Jun 26 13:34:11 2012] Source does appear to be extended
[Tue Jun 26 13:34:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 13:34:32 2012] Using EEF radius (= 11.52 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 13:34:32 2012] Initial guess for spatial extent in simple fitting = 11.52"
[Tue Jun 26 13:34:32 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.908
[Tue Jun 26 13:34:32 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 11.52"
[Tue Jun 26 14:34:37 2012] fullrun_pn_xmm0105261801_pi300-10000_cl_pass1_src21.ximg exists
[Tue Jun 26 14:34:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261801_pi300-10000_cl_pass1_src21.csv
[Tue Jun 26 14:34:37 2012] fullrun_pn_xmm0105261801_pi300-10000_cl_pass1_src21_1.ximg exists
[Tue Jun 26 14:34:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261801_pi300-10000_cl_pass1_src21.csv
[Tue Jun 26 14:34:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105261801_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105261801_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 14:34:38 2012] fullrun_pn_xmm0105261801_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Tue Jun 26 14:34:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261801_pi300-10000_cl_pass1_tfrozen_src21.csv
[Tue Jun 26 14:34:38 2012] fullrun_pn_xmm0105261801_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Tue Jun 26 14:34:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261801_pi300-10000_cl_pass1_tfrozen_src21.csv
[Tue Jun 26 14:34:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105261801_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105261801_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 16:26:11 2012] Spatial fit model total counts = 332.477000, observed total counts = 296.000000
[Tue Jun 26 16:26:11 2012] Poor agreement between spatial fit and data for source 21
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 26 16:26:11 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 16:26:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 16:26:11 2012] Assessing source extent using major
[Tue Jun 26 16:26:11 2012] Source does appear to be extended
[Tue Jun 26 16:26:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 16:26:26 2012] XMMSAS src. selection expression = ellipse(35683.120575, 18560.483521, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 26 16:26:26 2012] Writing source region out to fullrun_pn_xmm0105261801_pi300-10000_pass1_cl_src21_src.reg
[Tue Jun 26 16:26:26 2012] Extracting stamp from image fullrun_pn_xmm0105261801_pi300-10000_cl_sm2.00.img.gz, (373, 176) - (448, 251)
[Tue Jun 26 16:26:26 2012] XMMSAS bgd. selection expression = annulus(35683.120575, 18560.483521, 1087.500000, 2175.000000, X, Y)
[Tue Jun 26 16:26:26 2012] Writing fullrun_pn_xmm0105261801_pi300-10000_pass1_cl_src21.gif
[Tue Jun 26 16:37:09 2012] Mean detx,y = (-6895.25, -9234.67) 
[Tue Jun 26 16:37:11 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 26 16:37:31 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 26 16:37:32 2012] Setting source spectrum file to fullrun_pn_xmm0105261801_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue Jun 26 16:37:32 2012] Setting bgd. spectrum file to fullrun_pn_xmm0105261801_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Tue Jun 26 16:49:48 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 26 16:49:48 2012] rmf not generated due to insufficient counts
[Tue Jun 26 17:38:31 2012] Updating aperture counts using extracted products
[Tue Jun 26 17:38:31 2012] Error reading totcts from fullrun_pn_xmm0105261801_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue Jun 26 17:38:32 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 26 17:38:32 2012] Using photon index=1.80, rate=0.00583, arf fullrun_pn_xmm0105261801_pi300-10000_pass1_cl_src21.arf
[Tue Jun 26 17:38:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 26 17:38:32 2012] Updating source flux to 3.3e-14
[Tue Jun 26 17:40:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting