[Tue Jun 26 10:23:28 2012] Detection parameters:
  Position = (446.3, 379.1) = 13 33 28.27 -31 36 50.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 258.7 +/- 24.9
  Background counts = 85.4
  Rate = 0.01 +/- 0.001

[Tue Jun 26 10:23:29 2012] Off-axis axis estimate = 12.21'
[Tue Jun 26 10:27:30 2012] Using EEF radius (= 12.54 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 10:27:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 26 10:27:30 2012] Initial guess for spatial extent in simple fitting = 12.54"
[Tue Jun 26 10:27:30 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.918
[Tue Jun 26 10:27:30 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.54"
[Tue Jun 26 11:39:51 2012] fullrun_pn_xmm0105261801_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 26 11:39:51 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0105261801_pi300-10000_cl_pass0_src1.csv
[Tue Jun 26 11:39:51 2012] fullrun_pn_xmm0105261801_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 26 11:39:51 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0105261801_pi300-10000_cl_pass0_src1.csv
[Tue Jun 26 11:39:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105261801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105261801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 11:39:52 2012] fullrun_pn_xmm0105261801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 26 11:39:52 2012] fullrun_pn_xmm0105261801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 26 11:39:52 2012] Fit fullrun_pn_xmm0105261801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 26 13:34:11 2012] Spatial fit model total counts = 1128.990000, observed total counts = 1129.000000
[Tue Jun 26 13:34:11 2012] Offset between fit and detection position for source 1 = 0.181595 pixels
[Tue Jun 26 13:34:11 2012] 1108.981000 total counts/ 958.160000 bgd. counts: snr = 4.872398
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.181595 pixels
  Position = (446.1, 379.1) = 13 33 28.33 -31 36 50.8
  Extent = 8.0 (6.4-10.0)", rotation angle = 0
  Source counts = 150.8 +/- 33.3
  Background counts = 958.2
  Rate = 0.02 +/- 0.004
[Tue Jun 26 13:34:11 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 13:34:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 13:34:11 2012] Assessing source extent using major axis lower bound
[Tue Jun 26 13:34:11 2012] Source does appear to be extended
[Tue Jun 26 13:34:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 13:34:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 26 13:34:32 2012] Initial guess for spatial extent in simple fitting = 8.05"
[Tue Jun 26 13:34:32 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.724
[Tue Jun 26 13:34:32 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.05"
[Tue Jun 26 14:34:37 2012] fullrun_pn_xmm0105261801_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun 26 14:34:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261801_pi300-10000_cl_pass1_src1.csv
[Tue Jun 26 14:34:37 2012] fullrun_pn_xmm0105261801_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun 26 14:34:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261801_pi300-10000_cl_pass1_src1.csv
[Tue Jun 26 14:34:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105261801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105261801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 14:34:37 2012] fullrun_pn_xmm0105261801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 26 14:34:37 2012] fullrun_pn_xmm0105261801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 26 14:34:37 2012] Fit fullrun_pn_xmm0105261801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jun 26 16:26:11 2012] Spatial fit model total counts = 613.990000, observed total counts = 614.000000
[Tue Jun 26 16:26:11 2012] Offset between fit and detection position for source 1 = 0.031277 pixels
[Tue Jun 26 16:26:11 2012] 604.760000 total counts/ 454.243000 bgd. counts: snr = 7.062223
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.031277 pixels
  Position = (446.2, 379.0) = 13 33 28.32 -31 36 50.9
  Extent = 8.0 (6.2-10.4)", rotation angle = 0
  Source counts = 150.5 +/- 24.6
  Background counts = 454.2
  Rate = 0.02 +/- 0.003
[Tue Jun 26 16:26:11 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 16:26:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 16:26:11 2012] Assessing source extent using major axis lower bound
[Tue Jun 26 16:26:11 2012] Source does appear to be extended
[Tue Jun 26 16:26:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 16:26:26 2012] XMMSAS src. selection expression = ellipse(38767.611380, 32926.383600, 479.974814, 479.974814, 0.000000, X, Y)
[Tue Jun 26 16:26:26 2012] Writing source region out to fullrun_pn_xmm0105261801_pi300-10000_pass1_cl_src1_src.reg
[Tue Jun 26 16:26:26 2012] Extracting stamp from image fullrun_pn_xmm0105261801_pi300-10000_cl_sm2.00.img.gz, (419, 351) - (474, 407)
[Tue Jun 26 16:26:26 2012] XMMSAS bgd. selection expression = annulus(38767.611380, 32926.383600, 799.958023, 1599.916046, X, Y) && !ellipse(36575.159973, 30582.825226, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 26 16:26:26 2012] Writing fullrun_pn_xmm0105261801_pi300-10000_pass1_cl_src1.gif
[Tue Jun 26 16:26:31 2012] Mean detx,y = (-15651.51, 2583.45) 
[Tue Jun 26 16:26:33 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 26 16:26:47 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 26 16:26:47 2012] Setting source spectrum file to fullrun_pn_xmm0105261801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 26 16:26:47 2012] Setting bgd. spectrum file to fullrun_pn_xmm0105261801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jun 26 17:38:31 2012] Updating aperture counts using extracted products
[Tue Jun 26 17:38:31 2012] Error reading totcts from fullrun_pn_xmm0105261801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 26 17:38:31 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 26 17:38:31 2012] Using photon index=1.80, rate=0.0165, arf fullrun_pn_xmm0105261801_pi300-10000_pass1_cl_src1.arf
[Tue Jun 26 17:38:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 26 17:38:31 2012] Updating source flux to 1.5e-13
[Tue Jun 26 17:40:34 2012] Reading fit data from xmm0105261801/analysis//spectral/fullrun_pn_xmm0105261801_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jun 26 17:40:34 2012] Spectral fit parameter nH value = 1.21645e+13
[Tue Jun 26 17:40:34 2012] Spectral fit parameter PhoIndex value = 2.30246
[Tue Jun 26 17:40:34 2012] Failed to get F(0.3-8.0) from xmm0105261801/analysis//spectral/fullrun_pn_xmm0105261801_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jun 26 17:40:34 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 26 17:40:34 2012] Using Nh = 1.2e+13, photon index=2.30, rate=0.0165, arf fullrun_pn_xmm0105261801_pi300-10000_pass1_cl_src1.arf
[Tue Jun 26 17:40:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 26 17:40:34 2012] Updating source flux to 1.1e-13