[Tue Jun 26 10:24:31 2012] Detection parameters:
  Position = (422.2, 331.9) = 13 33 36.46 -31 40 16.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 277.3 +/- 26.3
  Background counts = 90.6
  Rate = 0.01 +/- 0.001

[Tue Jun 26 10:24:31 2012] Off-axis axis estimate = 9.29'
[Tue Jun 26 12:40:58 2012] Using EEF radius (= 11.08 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 12:40:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 26 12:40:58 2012] Initial guess for spatial extent in simple fitting = 11.08"
[Tue Jun 26 12:40:58 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.970
[Tue Jun 26 12:40:58 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.08"
[Tue Jun 26 13:34:02 2012] fullrun_mos2_xmm0105261801_pi300-10000_cl_pass0_src2.ximg exists
[Tue Jun 26 13:34:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261801_pi300-10000_cl_pass0_src2.csv
[Tue Jun 26 13:34:02 2012] fullrun_mos2_xmm0105261801_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Jun 26 13:34:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261801_pi300-10000_cl_pass0_src2.csv
[Tue Jun 26 13:34:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105261801_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105261801_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 13:34:03 2012] fullrun_mos2_xmm0105261801_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Jun 26 13:34:03 2012] fullrun_mos2_xmm0105261801_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Jun 26 13:34:03 2012] Fit fullrun_mos2_xmm0105261801_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Jun 26 13:34:19 2012] Spatial fit model total counts = 1678.270000, observed total counts = 1679.000000
[Tue Jun 26 13:34:19 2012] Offset between fit and detection position for source 7 = 0.492454 pixels
[Tue Jun 26 13:34:19 2012] 1504.309000 total counts/ 1025.560000 bgd. counts: snr = 14.949523
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.492454 pixels
  Position = (422.2, 332.4) = 13 33 36.47 -31 40 13.9
  Extent = 22.1 (22.1-44.3)", rotation angle = 0
  Source counts = 478.7 +/- 38.8
  Background counts = 1025.6
  Rate = 0.03 +/- 0.002
[Tue Jun 26 13:34:19 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 13:34:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 13:34:19 2012] Assessing source extent using major axis lower bound
[Tue Jun 26 13:34:19 2012] Source does appear to be extended
[Tue Jun 26 13:34:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 13:34:19 2012] Source is confused with source 10
[Tue Jun 26 13:34:19 2012] Source is confused with source 6
[Tue Jun 26 13:34:19 2012] Source is confused with source 8
[Tue Jun 26 13:34:19 2012] Source is confused with source 3
[Tue Jun 26 13:34:19 2012] Source is confused with source 5
[Tue Jun 26 13:34:19 2012] Source is confused with source 11
[Tue Jun 26 15:26:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 26 15:26:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 26 15:26:12 2012] Initial guess for spatial extent in simple fitting = 22.14"
[Tue Jun 26 15:26:12 2012] source mask rpix=5.1, npix_max = 124, mask sum = 121, frac = 0.968
[Tue Jun 26 15:26:12 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 22.14"
[Tue Jun 26 16:26:03 2012] fullrun_mos2_xmm0105261801_pi300-10000_cl_pass1_src2.ximg exists
[Tue Jun 26 16:26:03 2012] fullrun_mos2_xmm0105261801_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Jun 26 16:26:03 2012] Fit fullrun_mos2_xmm0105261801_pi300-10000_cl_pass1_src2 appears to have run properly
[Tue Jun 26 16:26:03 2012] fullrun_mos2_xmm0105261801_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Jun 26 16:26:03 2012] fullrun_mos2_xmm0105261801_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Jun 26 16:26:03 2012] Fit fullrun_mos2_xmm0105261801_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Jun 26 16:26:18 2012] Warning, spatial fit 2 centroid is now closest to src. 5
[Tue Jun 26 16:26:18 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 16:26:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 16:26:18 2012] Assessing source extent using major axis lower bound
[Tue Jun 26 16:26:18 2012] Source does appear to be extended
[Tue Jun 26 16:26:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 17:10:01 2012] XMMSAS src. selection expression = ellipse(36679.556580, 28869.884800, 1328.388038, 1328.388038, 0.000000, X, Y)
[Tue Jun 26 17:10:01 2012] Writing source region out to fullrun_mos2_xmm0105261801_pi300-10000_pass1_cl_src7_src.reg
[Tue Jun 26 17:10:01 2012] Extracting stamp from image fullrun_mos2_xmm0105261801_pi300-10000_cl_sm2.00.img.gz, (346, 256) - (499, 409)
[Tue Jun 26 17:10:01 2012] XMMSAS bgd. selection expression = annulus(36679.556580, 28869.884800, 2213.980064, 4427.960127, X, Y) && !ellipse(36838.866000, 28459.301000, 1757.704051, 1757.704051, 0.000000, X, Y) && !ellipse(35984.492000, 29001.574000, 2292.624066, 2292.624066, 0.000000, X, Y) && !ellipse(36038.631653, 28398.559174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36503.178400, 29877.654800, 1768.904051, 1768.904051, 0.000000, X, Y) && !ellipse(38799.968323, 32914.012634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37301.780000, 28629.032000, 1236.040036, 1236.040036, 0.000000, X, Y) && !ellipse(37463.819519, 27817.585663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34771.012000, 29915.808000, 1695.896049, 1695.896049, 0.000000, X, Y) && !ellipse(37897.030029, 27791.635406, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 26 17:10:01 2012] Writing fullrun_mos2_xmm0105261801_pi300-10000_pass1_cl_src7.gif
[Tue Jun 26 17:12:34 2012] Mean detx,y = (12196.06, 19.51) 
[Tue Jun 26 17:12:35 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 26 17:12:49 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 26 17:12:49 2012] Setting source spectrum file to fullrun_mos2_xmm0105261801_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Jun 26 17:12:49 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0105261801_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Tue Jun 26 17:38:32 2012] Updating aperture counts using extracted products
[Tue Jun 26 17:38:32 2012] Error reading totcts from fullrun_mos2_xmm0105261801_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Jun 26 17:38:32 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 26 17:38:32 2012] Using photon index=1.80, rate=0.0275, arf fullrun_mos2_xmm0105261801_pi300-10000_pass1_cl_src7.arf
[Tue Jun 26 17:38:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 26 17:38:33 2012] Updating source flux to 5.7e-13
[Tue Jun 26 17:39:08 2012] Flag c found in src. 7 procflags, skipping spectral fitting
[Tue Jun 26 17:40:12 2012] Reading fit data from xmm0105261801/analysis//spectral/fullrun_mos2_xmm0105261801_pi300-10000_pass1_cl_src7_pl.csv
[Tue Jun 26 17:40:12 2012] Spectral fit parameter nH value = 1.4625e+21
[Tue Jun 26 17:40:12 2012] Spectral fit parameter PhoIndex value = 2.12735
[Tue Jun 26 17:40:12 2012] Failed to get F(0.3-8.0) from xmm0105261801/analysis//spectral/fullrun_mos2_xmm0105261801_pi300-10000_pass1_cl_src7_pl.csv, possibly due to different flux energy range selected
[Tue Jun 26 17:40:12 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 26 17:40:12 2012] Using Nh = 1.5e+21, photon index=2.13, rate=0.0275, arf fullrun_mos2_xmm0105261801_pi300-10000_pass1_cl_src7.arf
[Tue Jun 26 17:40:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 26 17:40:12 2012] Updating source flux to 5.6e-13