[Tue Jun 26 10:24:01 2012] Detection parameters:
  Position = (413.0, 325.9) = 13 33 39.58 -31 40 43.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 150.6 +/- 20.6
  Background counts = 83.7
  Rate = 0.007 +/- 0.001

[Tue Jun 26 10:24:01 2012] Off-axis axis estimate = 8.54'
[Tue Jun 26 11:39:52 2012] Using EEF radius (= 10.70 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 11:39:52 2012] Initial guess for spatial extent in simple fitting = 10.70"
[Tue Jun 26 11:39:52 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.027
[Tue Jun 26 11:39:52 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 10.70"
[Tue Jun 26 12:40:58 2012] fullrun_mos1_xmm0105261801_pi300-10000_cl_pass0_src8.ximg exists
[Tue Jun 26 12:40:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105261801_pi300-10000_cl_pass0_src8.csv
[Tue Jun 26 12:40:58 2012] fullrun_mos1_xmm0105261801_pi300-10000_cl_pass0_src8_1.ximg exists
[Tue Jun 26 12:40:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105261801_pi300-10000_cl_pass0_src8.csv
[Tue Jun 26 12:40:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105261801_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105261801_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 12:40:58 2012] fullrun_mos1_xmm0105261801_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Tue Jun 26 12:40:58 2012] fullrun_mos1_xmm0105261801_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Tue Jun 26 12:40:58 2012] Fit fullrun_mos1_xmm0105261801_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Tue Jun 26 13:34:16 2012] Source 9 is offset by -0.458630 and 3.505705 pixels which is larger than
2 X fitted extent = 1.253591 x 1.253591, not incorporating fit results
[Tue Jun 26 13:34:16 2012] Warning, spatial fit 8 centroid is now closest to src. 6
[Tue Jun 26 13:34:16 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 13:34:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 13:34:16 2012] Assessing source extent using major
[Tue Jun 26 13:34:16 2012] Source does appear to be extended
[Tue Jun 26 13:34:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 13:34:16 2012] Source is confused with source 12
[Tue Jun 26 14:34:38 2012] Using EEF radius (= 10.70 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 14:34:38 2012] Initial guess for spatial extent in simple fitting = 10.70"
[Tue Jun 26 14:34:38 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.027
[Tue Jun 26 14:34:38 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 10.70"
[Tue Jun 26 15:26:11 2012] fullrun_mos1_xmm0105261801_pi300-10000_cl_pass1_src8.ximg exists
[Tue Jun 26 15:26:11 2012] fullrun_mos1_xmm0105261801_pi300-10000_cl_pass1_src8_1.ximg exists
[Tue Jun 26 15:26:11 2012] Fit fullrun_mos1_xmm0105261801_pi300-10000_cl_pass1_src8 appears to have run properly
[Tue Jun 26 15:26:11 2012] fullrun_mos1_xmm0105261801_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Tue Jun 26 15:26:11 2012] fullrun_mos1_xmm0105261801_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Tue Jun 26 15:26:11 2012] Fit fullrun_mos1_xmm0105261801_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Tue Jun 26 16:26:15 2012] Warning, spatial fit 8 centroid is now closest to src. 10
[Tue Jun 26 16:26:15 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 16:26:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 16:26:15 2012] Assessing source extent using major
[Tue Jun 26 16:26:15 2012] Source does appear to be extended
[Tue Jun 26 16:26:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 16:50:16 2012] XMMSAS src. selection expression = ellipse(35885.423187, 28307.940369, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 26 16:50:16 2012] Writing source region out to fullrun_mos1_xmm0105261801_pi300-10000_pass1_cl_src9_src.reg
[Tue Jun 26 16:50:16 2012] Extracting stamp from image fullrun_mos1_xmm0105261801_pi300-10000_cl_sm2.00.img.gz, (376, 288) - (451, 363)
[Tue Jun 26 16:50:16 2012] XMMSAS bgd. selection expression = annulus(35885.423187, 28307.940369, 1087.500000, 2175.000000, X, Y) && !ellipse(37028.295188, 28369.768045, 1181.324784, 746.895226, 90.000000, X, Y) && !ellipse(36409.225952, 28232.176453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37210.116000, 28747.154000, 1668.864048, 1668.864048, 0.000000, X, Y) && !ellipse(35971.544373, 29107.656433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36583.629517, 29267.571503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37171.054749, 27889.162598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37653.757660, 27793.578888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37646.204102, 29133.176575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38095.326000, 27394.092000, 1821.072052, 1821.072052, 0.000000, X, Y)
[Tue Jun 26 16:50:16 2012] Writing fullrun_mos1_xmm0105261801_pi300-10000_pass1_cl_src9.gif
[Tue Jun 26 16:53:14 2012] Mean detx,y = (502.02, -11487.10) 
[Tue Jun 26 16:53:16 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 26 16:53:34 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 26 16:53:34 2012] Setting source spectrum file to fullrun_mos1_xmm0105261801_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Tue Jun 26 16:53:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0105261801_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Tue Jun 26 17:04:46 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 26 17:04:46 2012] rmf not generated due to insufficient counts
[Tue Jun 26 17:38:32 2012] Updating aperture counts using extracted products
[Tue Jun 26 17:38:32 2012] Error reading totcts from fullrun_mos1_xmm0105261801_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Tue Jun 26 17:38:32 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 26 17:38:32 2012] Using photon index=1.80, rate=0.007, arf fullrun_mos1_xmm0105261801_pi300-10000_pass1_cl_src9.arf
[Tue Jun 26 17:38:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 26 17:38:32 2012] Updating source flux to 1.6e-13
[Tue Jun 26 17:38:34 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting