[Sun Aug 12 10:18:53 2012] Detection parameters:
  Position = (249.3, 224.2) = 13 33 5.23 -31 55 53.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.6 +/- 11.2
  Background counts = 22.2
  Rate = 0.004 +/- 0.0009

[Sun Aug 12 10:18:54 2012] Off-axis axis estimate = 6.45'
[Sun Aug 12 10:23:11 2012] Using EEF radius (= 9.65 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 10:23:11 2012] Initial guess for spatial extent in simple fitting = 9.65"
[Sun Aug 12 10:23:11 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.845
[Sun Aug 12 10:23:11 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 9.65"
[Sun Aug 12 12:24:58 2012] fullrun_pn_xmm0105261701_pi300-10000_cl_pass0_src39.ximg exists
[Sun Aug 12 12:24:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261701_pi300-10000_cl_pass0_src39.csv
[Sun Aug 12 12:24:58 2012] fullrun_pn_xmm0105261701_pi300-10000_cl_pass0_src39_1.ximg exists
[Sun Aug 12 12:24:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261701_pi300-10000_cl_pass0_src39.csv
[Sun Aug 12 12:24:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105261701_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105261701_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 12:24:58 2012] fullrun_pn_xmm0105261701_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Sun Aug 12 12:24:59 2012] fullrun_pn_xmm0105261701_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Sun Aug 12 12:24:59 2012] Fit fullrun_pn_xmm0105261701_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Sun Aug 12 16:34:34 2012] Source 39 is offset by -8.576512 and -2.125182 pixels which is larger than
2 X fitted extent = 1.109733 x 1.109733, not incorporating fit results
[Sun Aug 12 16:34:34 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 16:34:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 16:34:34 2012] Assessing source extent using major
[Sun Aug 12 16:34:34 2012] Source does appear to be extended
[Sun Aug 12 16:34:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 16:35:00 2012] Using EEF radius (= 9.65 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 16:35:00 2012] Initial guess for spatial extent in simple fitting = 9.65"
[Sun Aug 12 16:35:00 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.845
[Sun Aug 12 16:35:00 2012] Giving source the simple spatial ID 38 for pass 1, mean size = 9.65"
[Sun Aug 12 18:05:07 2012] fullrun_pn_xmm0105261701_pi300-10000_cl_pass1_src38.ximg exists
[Sun Aug 12 18:05:07 2012] fullrun_pn_xmm0105261701_pi300-10000_cl_pass1_src38_1.ximg exists
[Sun Aug 12 18:05:07 2012] Fit fullrun_pn_xmm0105261701_pi300-10000_cl_pass1_src38 appears to have run properly
[Sun Aug 12 18:05:08 2012] fullrun_pn_xmm0105261701_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Sun Aug 12 18:05:08 2012] fullrun_pn_xmm0105261701_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Sun Aug 12 18:05:08 2012] Fit fullrun_pn_xmm0105261701_pi300-10000_cl_pass1_tfrozen_src38 appears to have run properly
[Sun Aug 12 22:11:48 2012] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 11.185724 pixels away
[Sun Aug 12 22:11:48 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 22:11:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 22:11:48 2012] Assessing source extent using major
[Sun Aug 12 22:11:48 2012] Source does appear to be extended
[Sun Aug 12 22:11:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 22:12:14 2012] XMMSAS src. selection expression = ellipse(21640.637436, 19459.931778, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Aug 12 22:12:14 2012] Writing source region out to fullrun_pn_xmm0105261701_pi300-10000_pass1_cl_src39_src.reg
[Sun Aug 12 22:12:14 2012] Extracting stamp from image fullrun_pn_xmm0105261701_pi300-10000_cl_sm2.00.img.gz, (212, 187) - (287, 262)
[Sun Aug 12 22:12:14 2012] XMMSAS bgd. selection expression = annulus(21640.637436, 19459.931778, 1087.500000, 2175.000000, X, Y) && !ellipse(23638.535034, 16469.112961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24598.282990, 19322.851288, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 12 22:12:14 2012] Writing fullrun_pn_xmm0105261701_pi300-10000_pass1_cl_src39.gif
[Sun Aug 12 22:32:31 2012] Mean detx,y = (5328.94, -2874.91) 
[Sun Aug 12 22:32:33 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 22:32:57 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 22:32:57 2012] Setting source spectrum file to fullrun_pn_xmm0105261701_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sun Aug 12 22:32:57 2012] Setting bgd. spectrum file to fullrun_pn_xmm0105261701_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Sun Aug 12 22:52:53 2012] Not generating rmf since there are only 52 counts
[Sun Aug 12 22:52:53 2012] rmf not generated due to insufficient counts
[Sun Aug 12 23:26:10 2012] Updating aperture counts using extracted products
[Sun Aug 12 23:26:10 2012] Error reading totcts from fullrun_pn_xmm0105261701_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sun Aug 12 23:26:11 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 23:26:11 2012] Using photon index=1.80, rate=0.00413, arf fullrun_pn_xmm0105261701_pi300-10000_pass1_cl_src39.arf
[Sun Aug 12 23:26:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 23:26:11 2012] Updating source flux to 1.4e-14
[Sun Aug 12 23:26:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting