[Sun Aug 12 10:20:51 2012] Detection parameters:
  Position = (148.6, 241.7) = 13 33 39.63 -31 54 36.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.5 +/- 11.1
  Background counts = 7.3
  Rate = 0.007 +/- 0.001

[Sun Aug 12 10:20:52 2012] Off-axis axis estimate = 11.61'
[Sun Aug 12 14:40:53 2012] Using EEF radius (= 12.24 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 14:40:53 2012] Initial guess for spatial extent in simple fitting = 12.24"
[Sun Aug 12 14:40:53 2012] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.116
[Sun Aug 12 14:40:53 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 12.24"
[Sun Aug 12 16:34:24 2012] fullrun_mos2_xmm0105261701_pi300-10000_cl_pass0_src10.ximg exists
[Sun Aug 12 16:34:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261701_pi300-10000_cl_pass0_src10.csv
[Sun Aug 12 16:34:24 2012] fullrun_mos2_xmm0105261701_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun Aug 12 16:34:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261701_pi300-10000_cl_pass0_src10.csv
[Sun Aug 12 16:34:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105261701_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105261701_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 16:34:24 2012] fullrun_mos2_xmm0105261701_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun Aug 12 16:34:24 2012] fullrun_mos2_xmm0105261701_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Aug 12 16:34:24 2012] Fit fullrun_mos2_xmm0105261701_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Sun Aug 12 16:34:48 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 12.377139 pixels away
[Sun Aug 12 16:34:48 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 16:34:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 16:34:48 2012] Assessing source extent using major
[Sun Aug 12 16:34:48 2012] Source does appear to be extended
[Sun Aug 12 16:34:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 20:31:13 2012] Using EEF radius (= 12.24 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 20:31:13 2012] Initial guess for spatial extent in simple fitting = 12.24"
[Sun Aug 12 20:31:13 2012] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.116
[Sun Aug 12 20:31:13 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 12.24"
[Sun Aug 12 22:11:38 2012] fullrun_mos2_xmm0105261701_pi300-10000_cl_pass1_src10.ximg exists
[Sun Aug 12 22:11:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261701_pi300-10000_cl_pass1_src10.csv
[Sun Aug 12 22:11:38 2012] fullrun_mos2_xmm0105261701_pi300-10000_cl_pass1_src10_1.ximg exists
[Sun Aug 12 22:11:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261701_pi300-10000_cl_pass1_src10.csv
[Sun Aug 12 22:11:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105261701_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105261701_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 22:11:38 2012] fullrun_mos2_xmm0105261701_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sun Aug 12 22:11:38 2012] fullrun_mos2_xmm0105261701_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Aug 12 22:11:38 2012] Fit fullrun_mos2_xmm0105261701_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sun Aug 12 22:12:01 2012] Spatial fit model total counts = 134.846000, observed total counts = 134.000000
[Sun Aug 12 22:12:01 2012] Offset between fit and detection position for source 33 = 0.091220 pixels
[Sun Aug 12 22:12:01 2012] 134.804600 total counts/ 88.695700 bgd. counts: snr = 4.895911
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.091220 pixels
  Position = (148.6, 241.7) = 13 33 39.61 -31 54 36.5
  Extent = 5.6 (4.1-7.5)", rotation angle = 0
  Source counts = 46.1 +/- 11.6
  Background counts = 88.7
  Rate = 0.002 +/- 0.0006
[Sun Aug 12 22:12:01 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 22:12:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 22:12:01 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 22:12:01 2012] Source does appear to be extended
[Sun Aug 12 22:12:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 23:10:12 2012] XMMSAS src. selection expression = ellipse(12883.268800, 20976.375000, 333.282010, 333.282010, 0.000000, X, Y)
[Sun Aug 12 23:10:12 2012] Writing source region out to fullrun_mos2_xmm0105261701_pi300-10000_pass1_cl_src33_src.reg
[Sun Aug 12 23:10:12 2012] Extracting stamp from image fullrun_mos2_xmm0105261701_pi300-10000_cl_sm2.00.img.gz, (129, 223) - (168, 261)
[Sun Aug 12 23:10:12 2012] XMMSAS bgd. selection expression = annulus(12883.268800, 20976.375000, 555.470016, 1110.940032, X, Y) && !ellipse(11908.332840, 19899.766586, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 12 23:10:12 2012] Writing fullrun_mos2_xmm0105261701_pi300-10000_pass1_cl_src33.gif
[Sun Aug 12 23:12:28 2012] Mean detx,y = (-12751.16, -1888.11) 
[Sun Aug 12 23:12:29 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 23:12:36 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 23:12:36 2012] Setting source spectrum file to fullrun_mos2_xmm0105261701_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sun Aug 12 23:12:36 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0105261701_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Sun Aug 12 23:23:11 2012] Not generating rmf since there are only 46 counts
[Sun Aug 12 23:23:11 2012] rmf not generated due to insufficient counts
[Sun Aug 12 23:26:12 2012] Updating aperture counts using extracted products
[Sun Aug 12 23:26:12 2012] Error reading totcts from fullrun_mos2_xmm0105261701_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sun Aug 12 23:26:13 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 23:26:13 2012] Using photon index=1.80, rate=0.00223, arf fullrun_mos2_xmm0105261701_pi300-10000_pass1_cl_src33.arf
[Sun Aug 12 23:26:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 23:26:13 2012] Updating source flux to 5.4e-14
[Sun Aug 12 23:26:25 2012] Source 33 has fewer than 100.000000 counts, skipping spectral fitting