[Sun Aug 12 10:20:51 2012] Detection parameters:
  Position = (325.4, 335.6) = 13 32 39.23 -31 47 48.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.1 +/- 12.4
  Background counts = 11.6
  Rate = 0.005 +/- 0.0007

[Sun Aug 12 10:20:52 2012] Off-axis axis estimate = 3.33'
[Sun Aug 12 14:40:53 2012] Using EEF radius (= 8.09 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 14:40:53 2012] Initial guess for spatial extent in simple fitting = 8.09"
[Sun Aug 12 14:40:53 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.122
[Sun Aug 12 14:40:53 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 8.09"
[Sun Aug 12 16:34:24 2012] fullrun_mos2_xmm0105261701_pi300-10000_cl_pass0_src15.ximg exists
[Sun Aug 12 16:34:24 2012] fullrun_mos2_xmm0105261701_pi300-10000_cl_pass0_src15_1.ximg exists
[Sun Aug 12 16:34:24 2012] Fit fullrun_mos2_xmm0105261701_pi300-10000_cl_pass0_src15 appears to have run properly
[Sun Aug 12 16:34:25 2012] fullrun_mos2_xmm0105261701_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sun Aug 12 16:34:25 2012] fullrun_mos2_xmm0105261701_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sun Aug 12 16:34:25 2012] Fit fullrun_mos2_xmm0105261701_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sun Aug 12 16:34:48 2012] Warning, spatial fit 15 centroid is now closest to src. 8
[Sun Aug 12 16:34:48 2012] Spatial fit model total counts = 198.006000, observed total counts = 198.000000
[Sun Aug 12 16:34:48 2012] Offset between fit and detection position for source 20 = 0.643554 pixels
[Sun Aug 12 16:34:48 2012] Warning, changing simple spatial fit ID from 15 to 31
[Sun Aug 12 16:34:48 2012] 190.001900 total counts/ 168.142000 bgd. counts: snr = 1.685816
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.643554 pixels
  Position = (325.6, 336.2) = 13 32 39.18 -31 47 45.8
  Extent = 4.3 (2.1-6.5)", rotation angle = 0
  Source counts = 21.9 +/- 13.8
  Background counts = 168.1
  Rate = 0.001 +/- 0.0007
[Sun Aug 12 16:34:48 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 16:34:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 16:34:48 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 16:34:48 2012] Source does appear to be extended
[Sun Aug 12 16:34:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 20:31:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 12 20:31:13 2012] Initial guess for spatial extent in simple fitting = 4.32"
[Sun Aug 12 20:31:13 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.009
[Sun Aug 12 20:31:13 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 4.32"
[Sun Aug 12 22:11:38 2012] fullrun_mos2_xmm0105261701_pi300-10000_cl_pass1_src15.ximg exists
[Sun Aug 12 22:11:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261701_pi300-10000_cl_pass1_src15.csv
[Sun Aug 12 22:11:38 2012] fullrun_mos2_xmm0105261701_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun Aug 12 22:11:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261701_pi300-10000_cl_pass1_src15.csv
[Sun Aug 12 22:11:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105261701_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105261701_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 22:11:38 2012] fullrun_mos2_xmm0105261701_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun Aug 12 22:11:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261701_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sun Aug 12 22:11:38 2012] fullrun_mos2_xmm0105261701_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Aug 12 22:11:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261701_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sun Aug 12 22:11:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105261701_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105261701_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 22:12:01 2012] Warning, spatial fit 15 centroid is now closest to src. 19
[Sun Aug 12 22:12:01 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 22:12:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 22:12:01 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 22:12:01 2012] Source does appear to be extended
[Sun Aug 12 22:12:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 23:10:12 2012] XMMSAS src. selection expression = ellipse(28276.270000, 29202.902000, 259.261807, 259.261807, 0.000000, X, Y)
[Sun Aug 12 23:10:12 2012] Writing source region out to fullrun_mos2_xmm0105261701_pi300-10000_pass1_cl_src20_src.reg
[Sun Aug 12 23:10:12 2012] Extracting stamp from image fullrun_mos2_xmm0105261701_pi300-10000_cl_sm2.00.img.gz, (311, 321) - (340, 351)
[Sun Aug 12 23:10:12 2012] XMMSAS bgd. selection expression = annulus(28276.270000, 29202.902000, 432.103012, 864.206025, X, Y) && !ellipse(28808.660600, 29069.144600, 303.172809, 303.172809, 0.000000, X, Y) && !ellipse(28763.864655, 29864.849548, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 12 23:10:12 2012] Writing fullrun_mos2_xmm0105261701_pi300-10000_pass1_cl_src20.gif
[Sun Aug 12 23:13:14 2012] Mean detx,y = (4578.76, -3769.76) 
[Sun Aug 12 23:13:15 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 23:13:21 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 23:13:21 2012] Setting source spectrum file to fullrun_mos2_xmm0105261701_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sun Aug 12 23:13:21 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0105261701_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sun Aug 12 23:23:31 2012] Not generating rmf since there are only 21 counts
[Sun Aug 12 23:23:31 2012] rmf not generated due to insufficient counts
[Sun Aug 12 23:26:12 2012] Updating aperture counts using extracted products
[Sun Aug 12 23:26:12 2012] Error reading totcts from fullrun_mos2_xmm0105261701_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sun Aug 12 23:26:13 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 23:26:13 2012] Using photon index=1.80, rate=0.00106, arf fullrun_mos2_xmm0105261701_pi300-10000_pass1_cl_src20.arf
[Sun Aug 12 23:26:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 23:26:13 2012] Updating source flux to 1.8e-14
[Sun Aug 12 23:26:25 2012] Source 20 has fewer than 100.000000 counts, skipping spectral fitting