[Sun Aug 12 10:19:42 2012] Detection parameters:
  Position = (272.1, 191.3) = 13 32 57.45 -31 58 21.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 640.4 +/- 31.2
  Background counts = 8.8
  Rate = 0.05 +/- 0.002

[Sun Aug 12 10:19:44 2012] Off-axis axis estimate = 8.00'
[Sun Aug 12 12:24:59 2012] Using EEF radius (= 10.43 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 12:24:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 12 12:24:59 2012] Initial guess for spatial extent in simple fitting = 10.43"
[Sun Aug 12 12:24:59 2012] source mask rpix=2.4, npix_max = 33, mask sum = 24, frac = 0.715
[Sun Aug 12 12:24:59 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.43"
[Sun Aug 12 14:40:52 2012] fullrun_mos1_xmm0105261701_pi300-10000_cl_pass0_src1.ximg exists
[Sun Aug 12 14:40:52 2012] fullrun_mos1_xmm0105261701_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Aug 12 14:40:52 2012] Fit fullrun_mos1_xmm0105261701_pi300-10000_cl_pass0_src1 appears to have run properly
[Sun Aug 12 14:40:52 2012] fullrun_mos1_xmm0105261701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Aug 12 14:40:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105261701_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Aug 12 14:40:52 2012] fullrun_mos1_xmm0105261701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Aug 12 14:40:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105261701_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Aug 12 14:40:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105261701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105261701_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 16:34:41 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.344613 pixels away
[Sun Aug 12 16:34:41 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 16:34:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 16:34:41 2012] Assessing source extent using major
[Sun Aug 12 16:34:41 2012] Source does appear to be extended
[Sun Aug 12 16:34:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 18:05:09 2012] Using EEF radius (= 10.43 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 18:05:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 12 18:05:09 2012] Initial guess for spatial extent in simple fitting = 10.43"
[Sun Aug 12 18:05:09 2012] source mask rpix=2.4, npix_max = 33, mask sum = 24, frac = 0.715
[Sun Aug 12 18:05:09 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.43"
[Sun Aug 12 20:31:11 2012] fullrun_mos1_xmm0105261701_pi300-10000_cl_pass1_src1.ximg exists
[Sun Aug 12 20:31:11 2012] fullrun_mos1_xmm0105261701_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Aug 12 20:31:11 2012] Fit fullrun_mos1_xmm0105261701_pi300-10000_cl_pass1_src1 appears to have run properly
[Sun Aug 12 20:31:12 2012] fullrun_mos1_xmm0105261701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Aug 12 20:31:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105261701_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Aug 12 20:31:12 2012] fullrun_mos1_xmm0105261701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Aug 12 20:31:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105261701_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Aug 12 20:31:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105261701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105261701_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 22:11:55 2012] Source 1 is offset by 4.032109 and -3.670537 pixels which is larger than
2 X fitted extent = 0.432163 x 0.432163, not incorporating fit results
[Sun Aug 12 22:11:55 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 22:11:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 22:11:55 2012] Assessing source extent using major
[Sun Aug 12 22:11:55 2012] Source does appear to be extended
[Sun Aug 12 22:11:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 22:54:14 2012] XMMSAS src. selection expression = ellipse(23622.007477, 16593.449310, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Aug 12 22:54:14 2012] Writing source region out to fullrun_mos1_xmm0105261701_pi300-10000_pass1_cl_src1_src.reg
[Sun Aug 12 22:54:14 2012] Extracting stamp from image fullrun_mos1_xmm0105261701_pi300-10000_cl_sm2.00.img.gz, (235, 154) - (310, 229)
[Sun Aug 12 22:54:14 2012] XMMSAS bgd. selection expression = annulus(23622.007477, 16593.449310, 1087.500000, 2175.000000, X, Y) && !ellipse(24759.987549, 14312.099457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24156.726820, 14356.605800, 596.833617, 596.833617, 0.000000, X, Y)
[Sun Aug 12 22:54:14 2012] Writing fullrun_mos1_xmm0105261701_pi300-10000_pass1_cl_src1.gif
[Sun Aug 12 22:54:17 2012] Mean detx,y = (6436.19, 4288.88) 
[Sun Aug 12 22:54:18 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 22:54:39 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 22:54:39 2012] Setting source spectrum file to fullrun_mos1_xmm0105261701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug 12 22:54:39 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0105261701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Aug 12 23:03:05 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Aug 12 23:03:05 2012] rmf not generated due to insufficient counts
[Sun Aug 12 23:26:11 2012] Updating aperture counts using extracted products
[Sun Aug 12 23:26:11 2012] Error reading totcts from fullrun_mos1_xmm0105261701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug 12 23:26:11 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 23:26:11 2012] Using photon index=1.80, rate=0.0481, arf fullrun_mos1_xmm0105261701_pi300-10000_pass1_cl_src1.arf
[Sun Aug 12 23:26:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 23:26:11 2012] Updating source flux to 7.5e-13
[Sun Aug 12 23:26:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Aug 12 23:26:25 2012] xmm0105261701/analysis//spectral/fullrun_mos1_xmm0105261701_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete