[Sat May 19 03:10:48 2012] Detection parameters:
  Position = (109.0, 280.9) = 13 33 35.91 -31 40 22.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 411.6 +/- 36.0
  Background counts = 199.2
  Rate = 0.02 +/- 0.002

[Sat May 19 03:10:49 2012] Off-axis axis estimate = 13.79'
[Sat May 19 03:13:17 2012] Using EEF radius (= 13.32 ")to estimate initial spatial extent for simple fitting
[Sat May 19 03:13:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 19 03:13:17 2012] Initial guess for spatial extent in simple fitting = 13.32"
[Sat May 19 03:13:17 2012] source mask rpix=3.1, npix_max = 50, mask sum = 64, frac = 1.260
[Sat May 19 03:13:17 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 13.32"
[Sat May 19 04:58:44 2012] fullrun_pn_xmm0105261601_pi300-10000_cl_pass0_src1.ximg exists
[Sat May 19 04:58:44 2012] fullrun_pn_xmm0105261601_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat May 19 04:58:44 2012] Fit fullrun_pn_xmm0105261601_pi300-10000_cl_pass0_src1 appears to have run properly
[Sat May 19 04:58:44 2012] fullrun_pn_xmm0105261601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat May 19 04:58:45 2012] fullrun_pn_xmm0105261601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat May 19 04:58:45 2012] Fit fullrun_pn_xmm0105261601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat May 19 06:13:04 2012] Spatial fit model total counts = 6892.260000, observed total counts = 6893.000000
[Sat May 19 06:13:04 2012] Offset between fit and detection position for source 1 = 3.546407 pixels
[Sat May 19 06:13:04 2012] 6470.100000 total counts/ 5249.610000 bgd. counts: snr = 16.844988
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 3.546407 pixels
  Position = (106.2, 283.1) = 13 33 36.87 -31 40 13.4
  Extent = 26.6 (26.5-26.6)", rotation angle = 0
  Source counts = 1220.5 +/- 80.4
  Background counts = 5249.6
  Rate = 0.07 +/- 0.004
[Sat May 19 06:13:04 2012] Spatial fit model total counts = 3998.020000, observed total counts = 4001.000000
[Sat May 19 06:13:04 2012] Offset between fit and detection position for source 1 = 1.640172 pixels
[Sat May 19 06:13:04 2012] Warning, changing simple spatial fit ID from 1 to 3
[Sat May 19 06:13:04 2012] 3937.790000 total counts/ 2875.460000 bgd. counts: snr = 19.810972
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.640172 pixels
  Position = (104.8, 282.1) = 13 33 37.33 -31 40 17.6
  Extent = 27.1 (8.9-54.1)", rotation angle = 0
  Source counts = 1062.3 +/- 62.8
  Background counts = 2875.5
  Rate = 0.06 +/- 0.003
[Sat May 19 06:13:04 2012] Vigneting correction estimate = 1.000000
[Sat May 19 06:13:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 06:13:04 2012] Assessing source extent using major axis lower bound
[Sat May 19 06:13:04 2012] Source does appear to be extended
[Sat May 19 06:13:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 06:13:04 2012] Source is confused with source 2
[Sat May 19 06:13:04 2012] Source is confused with source 3
[Sat May 19 06:13:04 2012] Source is confused with source 4
[Sat May 19 06:13:04 2012] Source is confused with source 8
[Sat May 19 06:13:04 2012] Source is confused with source 14
[Sat May 19 06:13:04 2012] Source is confused with source 15
[Sat May 19 06:13:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 19 06:13:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 19 06:13:23 2012] Initial guess for spatial extent in simple fitting = 27.06"
[Sat May 19 06:13:23 2012] source mask rpix=6.2, npix_max = 180, mask sum = 196, frac = 1.085
[Sat May 19 06:13:23 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 27.06"
[Sat May 19 08:05:43 2012] fullrun_pn_xmm0105261601_pi300-10000_cl_pass1_src1.ximg exists
[Sat May 19 08:05:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261601_pi300-10000_cl_pass1_src1.csv
[Sat May 19 08:05:43 2012] fullrun_pn_xmm0105261601_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat May 19 08:05:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105261601_pi300-10000_cl_pass1_src1.csv
[Sat May 19 08:05:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105261601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105261601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 08:05:44 2012] fullrun_pn_xmm0105261601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat May 19 08:05:44 2012] fullrun_pn_xmm0105261601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat May 19 08:05:44 2012] Fit fullrun_pn_xmm0105261601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat May 19 09:33:04 2012] Warning, spatial fit 1 centroid is now closest to src. 4
[Sat May 19 09:33:04 2012] Vigneting correction estimate = 1.000000
[Sat May 19 09:33:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 09:33:04 2012] Assessing source extent using major axis lower bound
[Sat May 19 09:33:04 2012] Source does appear to be extended
[Sat May 19 09:33:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 09:33:21 2012] Counts = 1062.330000, rescaling region sizes by 2.000000
[Sat May 19 09:33:21 2012] XMMSAS src. selection expression = ellipse(9073.054000, 24496.348000, 3247.092093, 3247.092093, 0.000000, X, Y)
[Sat May 19 09:33:21 2012] Writing source region out to fullrun_pn_xmm0105261601_pi300-10000_pass1_cl_src1_src.reg
[Sat May 19 09:33:21 2012] Extracting stamp from image fullrun_pn_xmm0105261601_pi300-10000_cl_sm2.00.img.gz, (0, 96) - (291, 469)
[Sat May 19 09:33:21 2012] XMMSAS bgd. selection expression = annulus(9073.054000, 24496.348000, 10823.640311, 21647.280623, X, Y) && !ellipse(8641.602051, 24133.358154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8809.912400, 24708.172000, 1014.824029, 1014.824029, 0.000000, X, Y) && !ellipse(9489.412600, 24455.562000, 1100.360032, 1100.360032, 0.000000, X, Y) && !ellipse(11297.238022, 28367.383820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24427.094666, 15407.325592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10175.109138, 23611.979431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22473.469820, 21548.793400, 384.655211, 384.655211, 0.000000, X, Y) && !ellipse(16003.005310, 19146.052887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31028.450653, 30847.181183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8608.392944, 25522.623474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10091.600000, 24288.826000, 4065.088117, 2902.344084, 344.280000, X, Y) && !ellipse(23499.975200, 22742.676800, 503.603214, 503.603214, 0.000000, X, Y) && !ellipse(11565.350000, 24739.076200, 2032.544058, 2032.544058, 0.000000, X, Y) && !ellipse(14116.673370, 38595.037231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23111.597960, 39976.920800, 518.593615, 518.593615, 0.000000, X, Y) && !ellipse(17459.920776, 37369.024353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13889.303299, 34500.368744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10659.420000, 22958.858000, 2089.112060, 2089.112060, 0.000000, X, Y) && !ellipse(23556.040619, 36820.208557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26793.556793, 34609.925873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22042.125656, 28400.120331, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 19 09:33:21 2012] Writing fullrun_pn_xmm0105261601_pi300-10000_pass1_cl_src1.gif
[Sat May 19 09:33:32 2012] Mean detx,y = (-16159.08, -4471.07) 
[Sat May 19 09:33:37 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 09:41:06 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 09:41:06 2012] Setting source spectrum file to fullrun_pn_xmm0105261601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May 19 09:41:06 2012] Setting bgd. spectrum file to fullrun_pn_xmm0105261601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat May 19 12:15:36 2012] Updating aperture counts using extracted products
[Sat May 19 12:15:36 2012] Error reading totcts from fullrun_pn_xmm0105261601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May 19 12:15:38 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 12:15:38 2012] Using photon index=1.80, rate=0.0571, arf fullrun_pn_xmm0105261601_pi300-10000_pass1_cl_src1.arf
[Sat May 19 12:15:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 12:15:38 2012] Updating source flux to 4.2e-13
[Sat May 19 12:18:38 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Sat May 19 12:21:05 2012] Reading fit data from xmm0105261601/analysis//spectral/fullrun_pn_xmm0105261601_pi300-10000_pass1_cl_src1_pl.csv
[Sat May 19 12:21:05 2012] Spectral fit parameter nH value = 1.37376e+21
[Sat May 19 12:21:05 2012] Spectral fit parameter PhoIndex value = 2.09221
[Sat May 19 12:21:05 2012] Failed to get F(0.3-8.0) from xmm0105261601/analysis//spectral/fullrun_pn_xmm0105261601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat May 19 12:21:05 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 12:21:05 2012] Using Nh = 1.4e+21, photon index=2.09, rate=0.0571, arf fullrun_pn_xmm0105261601_pi300-10000_pass1_cl_src1.arf
[Sat May 19 12:21:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 12:21:05 2012] Updating source flux to 4.6e-13