[Sat May 19 03:11:49 2012] Detection parameters:
  Position = (259.0, 248.0) = 13 32 44.82 -31 42 46.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 190.6 +/- 17.4
  Background counts = 15.6
  Rate = 0.01 +/- 0.001

[Sat May 19 03:11:49 2012] Off-axis axis estimate = 4.64'
[Sat May 19 05:29:40 2012] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Sat May 19 05:29:40 2012] Initial guess for spatial extent in simple fitting = 8.75"
[Sat May 19 05:29:40 2012] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.951
[Sat May 19 05:29:40 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.75"
[Sat May 19 06:12:54 2012] fullrun_mos2_xmm0105261601_pi300-10000_cl_pass0_src3.ximg exists
[Sat May 19 06:12:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261601_pi300-10000_cl_pass0_src3.csv
[Sat May 19 06:12:54 2012] fullrun_mos2_xmm0105261601_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat May 19 06:12:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261601_pi300-10000_cl_pass0_src3.csv
[Sat May 19 06:12:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105261601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105261601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 06:12:55 2012] fullrun_mos2_xmm0105261601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat May 19 06:12:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261601_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat May 19 06:12:55 2012] fullrun_mos2_xmm0105261601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat May 19 06:12:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261601_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat May 19 06:12:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105261601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105261601_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 06:13:13 2012] Spatial fit model total counts = 307.371000, observed total counts = 277.000000
[Sat May 19 06:13:13 2012] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 19 06:13:13 2012] Vigneting correction estimate = 1.000000
[Sat May 19 06:13:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 06:13:13 2012] Assessing source extent using major
[Sat May 19 06:13:13 2012] Source does appear to be extended
[Sat May 19 06:13:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 08:41:46 2012] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Sat May 19 08:41:46 2012] Initial guess for spatial extent in simple fitting = 8.75"
[Sat May 19 08:41:46 2012] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.951
[Sat May 19 08:41:46 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 8.75"
[Sat May 19 09:32:55 2012] fullrun_mos2_xmm0105261601_pi300-10000_cl_pass1_src3.ximg exists
[Sat May 19 09:32:55 2012] fullrun_mos2_xmm0105261601_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat May 19 09:32:55 2012] Fit fullrun_mos2_xmm0105261601_pi300-10000_cl_pass1_src3 appears to have run properly
[Sat May 19 09:32:55 2012] fullrun_mos2_xmm0105261601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat May 19 09:32:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261601_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat May 19 09:32:55 2012] fullrun_mos2_xmm0105261601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat May 19 09:32:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105261601_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat May 19 09:32:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105261601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105261601_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 09:33:12 2012] Spatial fit model total counts = 298.042000, observed total counts = 277.000000
[Sat May 19 09:33:12 2012] Offset between fit and detection position for source 9 = 0.174597 pixels
[Sat May 19 09:33:12 2012] 300.401000 total counts/ 176.651000 bgd. counts: snr = 9.310803
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.174597 pixels
  Position = (259.1, 247.9) = 13 32 44.78 -31 42 47.4
  Extent = 5.3" x 5.3", rotation angle = 0
  Source counts = 123.8 +/- 17.3
  Background counts = 176.7
  Rate = 0.005 +/- 0.0008
[Sat May 19 09:33:12 2012] Vigneting correction estimate = 1.000000
[Sat May 19 09:33:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 09:33:12 2012] Assessing source extent using major
[Sat May 19 09:33:12 2012] Source does appear to be extended
[Sat May 19 09:33:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 11:30:04 2012] XMMSAS src. selection expression = ellipse(22490.818720, 21520.317800, 318.621609, 318.621609, 0.000000, X, Y)
[Sat May 19 11:30:04 2012] Writing source region out to fullrun_mos2_xmm0105261601_pi300-10000_pass1_cl_src9_src.reg
[Sat May 19 11:30:04 2012] Extracting stamp from image fullrun_mos2_xmm0105261601_pi300-10000_cl_sm2.00.img.gz, (241, 230) - (277, 266)
[Sat May 19 11:30:05 2012] XMMSAS bgd. selection expression = annulus(22490.818720, 21520.317800, 531.036015, 1062.072031, X, Y) && !ellipse(23483.682600, 22738.352400, 463.556813, 318.136809, 23.071929, X, Y)
[Sat May 19 11:30:05 2012] Writing fullrun_mos2_xmm0105261601_pi300-10000_pass1_cl_src9.gif
[Sat May 19 11:31:10 2012] Mean detx,y = (6159.97, -4138.07) 
[Sat May 19 11:31:12 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 11:31:31 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 11:31:32 2012] Setting source spectrum file to fullrun_mos2_xmm0105261601_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat May 19 11:31:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0105261601_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sat May 19 12:15:44 2012] Updating aperture counts using extracted products
[Sat May 19 12:15:45 2012] Error reading totcts from fullrun_mos2_xmm0105261601_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat May 19 12:15:46 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 12:15:46 2012] Using photon index=1.80, rate=0.00536, arf fullrun_mos2_xmm0105261601_pi300-10000_pass1_cl_src9.arf
[Sat May 19 12:15:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 12:15:46 2012] Updating source flux to 9.6e-14
[Sat May 19 12:16:48 2012] Flag p found in src. 9 procflags, skipping spectral fitting