[Sat May 19 03:11:19 2012] Detection parameters:
  Position = (281.3, 177.2) = 13 32 37.21 -31 47 54.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.4 +/- 11.6
  Background counts = 14.4
  Rate = 0.003 +/- 0.0005

[Sat May 19 03:11:20 2012] Off-axis axis estimate = 8.88'
[Sat May 19 04:58:45 2012] Using EEF radius (= 10.87 ")to estimate initial spatial extent for simple fitting
[Sat May 19 04:58:45 2012] Initial guess for spatial extent in simple fitting = 10.87"
[Sat May 19 04:58:45 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.001
[Sat May 19 04:58:45 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 10.87"
[Sat May 19 05:29:40 2012] fullrun_mos1_xmm0105261601_pi300-10000_cl_pass0_src12.ximg exists
[Sat May 19 05:29:40 2012] fullrun_mos1_xmm0105261601_pi300-10000_cl_pass0_src12_1.ximg exists
[Sat May 19 05:29:40 2012] Fit fullrun_mos1_xmm0105261601_pi300-10000_cl_pass0_src12 appears to have run properly
[Sat May 19 05:29:40 2012] fullrun_mos1_xmm0105261601_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sat May 19 05:29:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105261601_pi300-10000_cl_pass0_tfrozen_src12.csv
[Sat May 19 05:29:40 2012] fullrun_mos1_xmm0105261601_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sat May 19 05:29:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105261601_pi300-10000_cl_pass0_tfrozen_src12.csv
[Sat May 19 05:29:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105261601_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105261601_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 06:13:08 2012] Warning, spatial fit 12 centroid is now closest to src. 22
[Sat May 19 06:13:08 2012] Vigneting correction estimate = 1.000000
[Sat May 19 06:13:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 06:13:08 2012] Assessing source extent using major
[Sat May 19 06:13:08 2012] Source does appear to be extended
[Sat May 19 06:13:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 06:13:08 2012] Source is confused with source 22
[Sat May 19 08:05:44 2012] Using EEF radius (= 10.87 ")to estimate initial spatial extent for simple fitting
[Sat May 19 08:05:44 2012] Initial guess for spatial extent in simple fitting = 10.87"
[Sat May 19 08:05:44 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.001
[Sat May 19 08:05:44 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 10.87"
[Sat May 19 08:41:46 2012] fullrun_mos1_xmm0105261601_pi300-10000_cl_pass1_src12.ximg exists
[Sat May 19 08:41:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105261601_pi300-10000_cl_pass1_src12.csv
[Sat May 19 08:41:46 2012] fullrun_mos1_xmm0105261601_pi300-10000_cl_pass1_src12_1.ximg exists
[Sat May 19 08:41:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105261601_pi300-10000_cl_pass1_src12.csv
[Sat May 19 08:41:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105261601_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105261601_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 08:41:46 2012] fullrun_mos1_xmm0105261601_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sat May 19 08:41:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105261601_pi300-10000_cl_pass1_tfrozen_src12.csv
[Sat May 19 08:41:46 2012] fullrun_mos1_xmm0105261601_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sat May 19 08:41:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105261601_pi300-10000_cl_pass1_tfrozen_src12.csv
[Sat May 19 08:41:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105261601_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105261601_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 09:33:08 2012] Spatial fit model total counts = 234.405000, observed total counts = 211.000000
[Sat May 19 09:33:08 2012] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 19 09:33:08 2012] Spatial fit model total counts = 561.187000, observed total counts = 544.000000
[Sat May 19 09:33:08 2012] Offset between fit and detection position for source 9 = 1.389715 pixels
[Sat May 19 09:33:08 2012] Warning, changing simple spatial fit ID from 12 to 22
[Sat May 19 09:33:08 2012] 560.569000 total counts/ 455.548000 bgd. counts: snr = 4.920498
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.389715 pixels
  Position = (279.9, 177.2) = 13 32 37.69 -31 47 55.2
  Extent = 14.4 (9.8-18.9)", rotation angle = 0
  Source counts = 105.0 +/- 23.7
  Background counts = 455.5
  Rate = 0.005 +/- 0.001
[Sat May 19 09:33:08 2012] Vigneting correction estimate = 1.000000
[Sat May 19 09:33:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 09:33:08 2012] Assessing source extent using major axis lower bound
[Sat May 19 09:33:08 2012] Source does appear to be extended
[Sat May 19 09:33:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 10:59:15 2012] XMMSAS src. selection expression = ellipse(24302.204000, 15364.954000, 862.236025, 862.236025, 0.000000, X, Y)
[Sat May 19 10:59:15 2012] Writing source region out to fullrun_mos1_xmm0105261601_pi300-10000_pass1_cl_src9_src.reg
[Sat May 19 10:59:15 2012] Extracting stamp from image fullrun_mos1_xmm0105261601_pi300-10000_cl_sm2.00.img.gz, (230, 128) - (329, 227)
[Sat May 19 10:59:15 2012] XMMSAS bgd. selection expression = annulus(24302.204000, 15364.954000, 1437.060041, 2874.120083, X, Y) && !ellipse(23270.188000, 15781.568000, 1738.224050, 1738.224050, 0.000000, X, Y)
[Sat May 19 10:59:15 2012] Writing fullrun_mos1_xmm0105261601_pi300-10000_pass1_cl_src9.gif
[Sat May 19 11:05:00 2012] Mean detx,y = (-10223.38, -7446.08) 
[Sat May 19 11:05:01 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 11:05:32 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 11:05:32 2012] Setting source spectrum file to fullrun_mos1_xmm0105261601_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat May 19 11:05:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0105261601_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sat May 19 12:15:42 2012] Updating aperture counts using extracted products
[Sat May 19 12:15:42 2012] Error reading totcts from fullrun_mos1_xmm0105261601_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat May 19 12:15:44 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 12:15:44 2012] Using photon index=1.80, rate=0.00455, arf fullrun_mos1_xmm0105261601_pi300-10000_pass1_cl_src9.arf
[Sat May 19 12:15:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 12:15:44 2012] Updating source flux to 1e-13
[Sat May 19 12:15:48 2012] Flag p found in src. 9 procflags, skipping spectral fitting
[Sat May 19 12:15:48 2012] Flag c found in src. 9 procflags, skipping spectral fitting